Quote:
Originally Posted by vinnycol
Much involved in removing the rear bar??
Have to refit a reversing sensor that took a bit of a knock.
Cheers.
|
I only had mine off yesterday,took all of 10 minutes , first remove the mudflap on the side you want to get to if you only need enough room to get your hand in behind the bumper also you will find a couple of extra screws there , now remove the inside clips that hold the inside lining cover on the guard inside the boot and undo the 2 nuts that hold bumper near the tail light.
now along the top of the bumper where the boot lid meets the bumper there are 4 clips prize out the centres and the clips can be removed you will also find 2 under the car .
You should now be able the pull the bumper away from the side that you wish to access , put some thing under the bumper to take its weight while you push the reverse sensor back into position , once that's done reverse all and it should be easy just to replace all the clips and nuts .
Removing rear bumper on VZ sedan
)
Linear Mode
