Re: Triple window cluster

PhantomSV6 · #1 10-11-2008, 12:38 PM

Hi i just had an HSV cluster installed in my car and it seems that when the digital speedo is on, the two other windows are just blank. When you go through the other modes, all three windows are utilized.

I'm wondering if it's possible to set the cluster so that information appears in the left and right hand windows while in speedo mode.

Thanks

Phreddy · #2 10-11-2008, 12:51 PM

Hmmmmm - I don't think so, but I can look into it. Doc Bob - any ideas??

(I recently fitted a 3 window custer, and I have the same thing.)

PhantomSV6 · #3 10-11-2008, 01:23 PM

Thanks mate. Have sent you a PM also

baracuda · #4 12-11-2008, 08:10 PM

so is it worth putting a 3 window cluster into an SV6 if i use the digital speedo all the time?

Banks · #5 12-11-2008, 08:26 PM

Just dont have the digital speedo displayed?

I had a hsv cluster in my vy and i had all 3 windows working at once?

PhantomSV6 · #6 12-11-2008, 09:13 PM

I need that digital speedo

Torquative · #7 13-11-2008, 06:02 AM

i do believe the other 2 windows dont display anything with the digital speedo on.

Doctor Bob · #8 13-11-2008, 07:14 AM

yes when the speed is on the others are blank

Phreddy · #9 13-11-2008, 08:31 AM

There's our confirmation!

Thanks Rob.

PaulSV6 · #10 14-11-2008, 11:03 AM

Hey guys

Still learning about my VZ SV6, ive taken a interest into the Berlina/Calais Dash cluster.
I understand it is a strait swap. Would all three displays be utilised, in other words would it work the same way as if it where in a Berlina or Calais?

Also would Holden need to do any calibration?

StevieP · #11 14-11-2008, 01:34 PM

Quote:

Originally Posted by PaulSV6

Hey guys

Still learning about my VZ SV6, ive taken a interest into the Berlina/Calais Dash cluster.
I understand it is a strait swap. Would all three displays be utilised, in other words would it work the same way as if it where in a Berlina or Calais?

Also would Holden need to do any calibration?

If its a Manual Cluster they will need to program it to show Gear selection and change the diff ratio.

Banks · #12 14-11-2008, 01:55 PM

Quote:

Originally Posted by PaulSV6

Hey guys

Still learning about my VZ SV6, ive taken a interest into the Berlina/Calais Dash cluster.
I understand it is a strait swap. Would all three displays be utilised, in other words would it work the same way as if it where in a Berlina or Calais?

Also would Holden need to do any calibration?

Tech 2 is your friend

Available at you any friendly local Holden dealership lol

Phreddy · #13 14-11-2008, 02:14 PM

Answers to many questions in this thread....

Conclusive answers about VZ clusters