Help please glove box!!!!!

[paynetrainvy]

please help i was cleaning my car and i noticed the the glove box wasnt level so i just tried to adjust it and i BROKE IT!!!! my glove box is no hanging from one arm, its sat arvo and holden isnt open so im wondering if anyone know how much im looking at for a new glove box and is it hard to put a new one in cause if its easy ill do it myself im just wondering if anyone has any information at all, any help would be greatly appreciated.

[Archers]

just two clips for the glove box takes 5 sec to take it off open it and pull it down and it will come off

[andyman]

make sure you havnt dislodged the retaining clip at the base of the box?

[eroled]

My vy did the same thing im after 1 of the clips in the back of the glove box if anyone can help me out or send me in the right direction to a wreaker that will have one in the Gold Coast area. I"d hate to think what Holden want for one.

[Calaber]

My vy did the same thing im after 1 of the clips in the back of the glove box if anyone can help me out or send me in the right direction to a wreaker that will have one in the Gold Coast area. I"d hate to think what Holden want for one.

They are only a couple of bucks or so each. I replaced mine last week after breaking one. It was interesting to see that the new one, which was coloured in a light grey plastic, was actually different to the original black one, so I replaced both. If I had only replaced the broken one, it could have meant the glovebox would be out of alignment, as the new clip was deeper than the original.

[gregiem]

My wife broke mine by stuffing in a huge hand bag and trying to close it. Cost $5.00 at Holden for a pack of two, very easy to replace.

[eroled]

Sweet as i was expecting to pay $25 - $50 for the pair of these stupid clips, $5 - $10 is all i wanted to pay. cheers for the help

[eroled]

I went to Holden today and brought 2 clips ,it cost me a hole $6 .

[eroled]

I put the new clips in today and now the glove box wont open / close nicely and to close it ya have to slam it did this happen to anyone else. cheers Phil

[pr0n]

you could also heat it up with a heat gun and bend it back into place

[eroled]

you could also heat it up with a heat gun and bend it back into place

heat what up? The clips are slightly different 2mm-3mm bigger so now glove box rubs on inside of dash board when opening / closing. cheers Phil