Fog/driving lights in VZ ezecutive bumper

[Tuttle]

I've been looking around for any VZ executive bumpers that have had fog lights put in them. i have seen a few with the lights near the number plate but i dont like the looks of this.

My idea is to cut a round whole in the 2 inserts that site on the far bottom right and left of the bumper.

Has anyone seen this done or has done it themselves

Cheers

[Ewok]

hahahahah, don't do this. Seriously. Hunt around for a lumina(?) bar or an SV6 front bar and do the job properly. Have seen one or two in my time that have been cutout and they look sh*thouse

[Tuttle]

the Berlina bar is very very similar to the executive one, the only difference is the inserts at the bottom have the fog lights in them and thats y i figured i could put some in the executive and save $300 off buying a new bar

[Ewok]

each to their own.

[Torquative]

I was looking at it but I wouldnt do it unless I upgraded the bar to at least SVZ, which is essentially the same style just has the proper cutouts for the fog lights so itlooks more stock standard.

Those pop out sections on the Exec/acclaim bars dont match anything, Ive tried a few inserts from a few models and even different brands but no luck.

[OBR1EN]

The berlina front bar is completely different again much better of goin for a new front bar like the SV6/ SS Bar or SVZ bar will look much cleaner and you will have no hassles. Also the VZ's dont have the relay in there ready to plug the lights into so add in the wiring costs and the switch from holden if you want it to look all good and proper. Cost me $80 bucks to get mine wired and i got the switch for $30. Look around on ebay or at wreckers for front bars dirt cheap. Good Luck mate

[ashbox]

the svz bar is a berlina front bar, only diff is the berlina bar has a couple of black highlights

[Ewok]

ashbox .... WTF IS 7 ??? Driving me CRAZY!

[Tuttle]

Those pop out sections on the Exec/acclaim bars dont match anything, Ive tried a few inserts from a few models and even different brands but no luck.

yeh thats what i was looking at, my idea was to replace those inserts all togther with a grill like plastic mesh and insert the lights in there, kinda like the SSX bars

[Torquative]

I have seen one bloke do it on a VX Executive, similar sort of thing. he mounted the aftermarket round ones, then ran black mesh around it, like the metal fly screen mesh. Looked okay, but the VZ cutouts are a little bit bigger so it may look a tad funny.

Would definately be worth a look at though

[ashbox]

ashbox .... WTF IS 7 ??? Driving me CRAZY!

something a few of us have going outside of jc here in sa.