Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

squeaking idler pulleys

black as

New Member
Joined
Sep 8, 2008
Messages
254
Reaction score
2
Points
0
Location
Victoria
Members Ride
I have 2 cars VZ sv8 6 litre and VU ute 5.7 litre
Hey Guys
Found my idler pulleys are starting to squeak a lot until the car gets hot, its a 6 litre, has anyone had the same problem ?
 

davway

New Member
Joined
Nov 11, 2003
Messages
495
Reaction score
13
Points
0
Location
Warrnambool
Members Ride
WK LS1 Statesman
i have the same problem on my 5.7 litre.
its not the idle tensioner but one of the other two idler pullies.
 

black as

New Member
Joined
Sep 8, 2008
Messages
254
Reaction score
2
Points
0
Location
Victoria
Members Ride
I have 2 cars VZ sv8 6 litre and VU ute 5.7 litre
I thought it may be that, haven't pulled it apart yet to have a good look. Sprayed some CRC on it and it went away for about 10 minutes and its back again. Its annoying:bang:
 

davway

New Member
Joined
Nov 11, 2003
Messages
495
Reaction score
13
Points
0
Location
Warrnambool
Members Ride
WK LS1 Statesman
sounds like mine.
give it a spray and itll stop for a bit but it always comes back.
seems to almost stop when the car warms up as well.
im not sure if its a serviceable part or not or if its just one of those parts that your better off replacing and not worrying about it.

would like to hear other peoples thoughts though.
 

naf33n

go
Joined
Feb 25, 2006
Messages
1,243
Reaction score
20
Points
38
Location
The Shire
Members Ride
Supercharged VU SS
sure its not the belt, my sv6 would squeak sometimes when cold, or if it was wet(had bonnet scoops) changed the belt and the problem never came back

same deal with a mates monaro, was making a similar noise to my sv6, changed the belt for him and problem solved
 

VT-565

New Member
Joined
Apr 4, 2005
Messages
2,773
Reaction score
56
Points
0
Location
QLD
Members Ride
VT
Theoretically, if the pulley is plastic, it will be expanding faster than the captive bearing inside, this will increase the clearance between the ID of the pulley and the OD of the bearing. There may be some movement.
But i could be wrong too, whilst talking out of my arse.
 

davway

New Member
Joined
Nov 11, 2003
Messages
495
Reaction score
13
Points
0
Location
Warrnambool
Members Ride
WK LS1 Statesman
i know mine isnt the belt.
if i spray behind the pulley (or around the bolt) it shuts up for a bit.
 

andyman

The Only 6sp VZ Wagon
Joined
Mar 29, 2005
Messages
3,783
Reaction score
68
Points
48
Age
34
Location
Orange, NSW
Members Ride
2012 BT50 4x4, 84 Hilux 4x4 & 05 Husky TE450
replace the pulley thats squeaking, simple, if you spray lubricant on the pulley make sure its not getting on the belt aswell
 

buzuki

New Member
Joined
Feb 4, 2008
Messages
42
Reaction score
0
Points
0
Location
sydney
Members Ride
VX acclaim wagon S1
yeah i work on a few 6L and ive heard plenty squeaking, also heard the radiator fans sqeauk a bit too, usually most have had roughly ~100,000 klm
 

davway

New Member
Joined
Nov 11, 2003
Messages
495
Reaction score
13
Points
0
Location
Warrnambool
Members Ride
WK LS1 Statesman
any ideas on what a pulley costs?
a lot or a little?
 
Top