Might I find the problem divided to check the VSS like EYY said to do
unpluggd the VSS to see if that will fix the problem car is running fine know thinking there a short in the wiring loom or the VSS is stuffed
but not thinking VSS as it was working fine when the Dogged up auto loom was in...
Can't swap them diffeent loom plugs from auto to Manuel ecu's on VRs
I should also add had the injectors change with reco one as the auto elect found a couple of faulty ones
There no issue with the gear box as I was running a modified auto loom done by a auto elect and it was running fine but didn' like the way it looked as it looked doogy so bought a loom and ecu from a guy that just wreaked a vr the box was bought as a kit but had no loom
The vss is working fine or else my Speedo wouldn't be working loom and ecu were taken out of a vr manuel as vn and vp ran a bypass for Manuel which is a separate loom from the engin loom
It will start fine in that gear with clutch down but once you go to accelerate cut out again some time dose it in second as well
Been told might be a fault with the ecu or fuel pump
Hi there
Just finished doing a t5 full conversation with manual loom and ecu
Took it out for a drive I've changing into 3 gear car will automatically stall
Have checked all connecions on loom and engine light is not on have checked for DTCS but none present at the time
So don't know what...
Hi there
Just finished doing a t5 full conversation with manual loom and ecu
Took it out for a drive I've changing into 3 gear car will automatically stall
Have checked all connecions on loom and engine light is not on have checked for DTCS but none present at the time
So don' know what...