It takes just a moment to join our fantastic community
Not sure if it would have eaten em, but for cleaning carbon deposits off etc I find B1 works wonders and leaves no residue once it evaporates.
Just a little update on how everything has been going so far Since running the car on the Dyno, I have had a few more issues + Tail Shaft...
I'm running stock calipers with DBA 4000's & Remsa pads on my L67 conversion making 200+rwkw. Pulls up very well. Should get you by for a while...
+1 on Cam + Custom tune for the 5ltr. Tuned a mates high comp 5ltr with a fairly big cam and it made ~170+rwkw. The torque curve was really fat...
1-2 & 2-3 Solenoids are the same from VR - VS. As Immortality said, the only change was the addition of a PWM solenoid for VS + boxes when locking...
Depends how far you're going to go. Raptor is good if you only plan on pushing about 10psi through a stock Ecotec. They make good power too per...
Worn bushes on Lower trailing arms & Upper trailing arms on a solid axle diff will create all sorts of vibration. My bushes were absolutely...
A little bit of heat with a Heat Gun (Don't apply too much heat in one area) will help it come off easier too
Really needs a proper tune
Yeah the little hoses outside of the tank which connect to the filler neck hose / tube are the vapor hoses. I would replace all of them while the...
Center bearing you can do yourself very easily / cheaply. There is a How To on here which I used when I did mine. Bearing will cost you $35....
I used 3M fabric adhesive from Bunnings. Be sure to only apply a very thin coat so it doesn't soak through the fabric and stain it. If you're...
If you can make your own out of LED strips you can fit a fair few LED's (30+) in there and make it really bright like this: [ATTACH]
That K Frame looks hammered!!! Really nice fix though. Your only other solution would be to replace the K Frame itself but that pretty much...
Lol and pedders wanted $130 to supply SuperPro's and press the new ones in.... Got mine for $60 bucks on trade and cost me next to nothing to fit...
Separate names with a comma.
