Hi Troy,
good to see you got it ok....most likely you will have to take the r/h rocker cover off the motor (if it is a v8) to get enough clearance to fit the booster..also watch out for the graphite grease I put in the pushrod hole (from experience after I paint the pushrod I run a drill through the hole and grease it so its easy to get it over your pedal pin.
Cheers
Mark.
good to see you got it ok....most likely you will have to take the r/h rocker cover off the motor (if it is a v8) to get enough clearance to fit the booster..also watch out for the graphite grease I put in the pushrod hole (from experience after I paint the pushrod I run a drill through the hole and grease it so its easy to get it over your pedal pin.
Cheers
Mark.