jafo
lurker since 2003
- Joined
- Oct 7, 2003
- Messages
- 737
- Reaction score
- 6
- Points
- 18
- Age
- 59
- Location
- adelaide
- Members Ride
- 1999 wh statesman
Replacing the ABS module is very easy, although I have not done it.
First pull the red locking tab for the wiring connecor plug out towards the engine and disconnect the plug
Undo the screws that hold the black plastic part of the module onto the metal part with the tubes coming out of it (I think the are torx screws so will need a set of those drivers)
Remove the black part and replace with a new one and reconnect the plug.
It might be wise to disconnect the negative battery terminal before commencing work, have your radio code handy if you have to stock unit.
That's about it I think, someone will correct me if I'm wrong.
from what i have read about this abs module when changing the black plastic part the whole thing has to be facing upward so the pins line upand dont move
heres a short how to taken from the manual
your abs may or may not have the the spacer springs
Last edited: