Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. vk4akp

    Issues with VY'S

    Water on the floor in the front when it rains. I went through this in my 04 VY2 Wagon. I believe the front guard water outlets are blocked. However I have never worked out where they are yet. ??? Closing the vent (set to recirculate air) stopped the water getting in.
  2. vk4akp

    Transmission line to radiator Nut size needed?

    They do use gas thread style flange nuts. And the plastic tanks are what I'm trying to avoid. They are the weak point after a bit of age etc.
  3. vk4akp

    Transmission line to radiator Nut size needed?

    Hi, I've had to replace the radiator in my 04 VY2 Berlina Wagon (v6). I've ordered a full alloy one to get away from the plastic tanks. Even though it said its compatible the seller now says it needs adaptors to connect the transmission lines. They say theirs uses M18*1.5 What is the size...
  4. vk4akp

    "21. Driver air bag circuit resistance too high"...how can i fix it?

    @Lex Sorry I didn't get back to this sooner. Yes I was going to buy the Envious SRS package for over a year now but got put off by it being cripple ware. So glad I waited now as I think the Vident Tool is far better value for money really. It is the first loop so I'm suspecting the Clock Spring...
  5. vk4akp

    VZ Blaupunk CD won't Load. Everything else Works. Is there a quick fix?

    I still play my 78's so.... :p Some people like to keep things original.
  6. vk4akp

    VZ Blaupunk CD won't Load. Everything else Works. Is there a quick fix?

    Interested in knowing the outcome. It is 2021 and I've bought 3x of these now and still can't get a working unit pieced together. :(
  7. vk4akp

    "21. Driver air bag circuit resistance too high"...how can i fix it?

    @Lex so just had a play with the vident. First loop comes up as 6.8ohm resistance :( Jumps to 7.8 / 8.0 ohm when I start the car. (Higher voltage effect I guess). Turning the wheel does nothing. So I guess bad connection somewhere. Any idea where all the different connectors are on that...
  8. vk4akp

    "21. Driver air bag circuit resistance too high"...how can i fix it?

    So it looks like this is the gobble-d-goop I need to understand for starters. Try to work out where these connectors and terminals are and check and clean them. Then move on to the clock spring if necessary.
  9. vk4akp

    "21. Driver air bag circuit resistance too high"...how can i fix it?

    yea it's the i400AU. Only had it since last Friday. Plugged it in twice so far for a fiddle. Reset the srs twice. First time it came back after a 15 minute drive but strangely right at the end while sitting in the driveway idling. So no wheel turning or anything. Strange. So hopefully that's a...
  10. vk4akp

    "21. Driver air bag circuit resistance too high"...how can i fix it?

    I'm currently dealing with this same issue. Mine came on when I pulled up in a hurry to avoid someone not giving way. Dad lurched forward in the passengers seat snapping the belt dead tight. The srs then went off. I've cleared the code twice but it comes back. I have a Vident Holden scan tool...
  11. vk4akp

    Programming New Key Head

    I got time to have a 5 minute fiddle with the scan tool. Yes it said insert new key and turn to on position. Hopefully I didn't start some sort of process I don't want to waste time with a second hand clock spring. It will kill fail again later. It's annoying. I find them online after market...
  12. vk4akp

    Programming New Key Head

    So I bought a Vident i400AU scan tool recently. Its supposed to be able to program and link keys, bcm, ecu, etc etc. Reset srs. And so on. Not sure how the key head bit gets programmed yet. Have only had 5 minutes playing with it so far to reset my srs. Looks like I'm up for a clock spring. @...
  13. vk4akp

    Programming New Key Head

    fair enough. The Chinese have obviously cracked it as you can buy dongles that plug into the ALDL port and flash / link up to 3 keys. Its a shame they blow the device after that otherwise I'd be happy to just get one of those.
  14. vk4akp

    Wipers

    Anyone know the specs for 2004 VY2 Wagon - Wiper Blades? I just want to buy a bulk box of them cheap to get the on going maintenance costs down. ( My last car I kept for 18 years and currently one of my VY's I've had 7yrs). I can't find anything online for sure, but I think they are just...
  15. vk4akp

    Programming New Key Head

    Is there a DIY way to make the cable and get the software to program the keys if you have all the numbers? I paid Holden some time back for a printout of all the security numbers and would like to future proof myself to maintain the vehicle.
  16. vk4akp

    Help Needed - Ecotec Coolant

    I might just flush with the hose and replace the coolant using demineralised water. I've had the car maybe 6-7 years at a guess. It's never been done. Nor the brake fluid. The overflow bottle has always had some brown grunge in it. Better then letting it sit until I can finally do gaskets...
  17. vk4akp

    big nut thing on steering rack??

    It didn't take 3 hours to align. The adjustments he did took less then 5 minutes. And as mentioned earlier on the the rod ends are new.
  18. vk4akp

    big nut thing on steering rack??

    Yes I could sand a socket down I guess. I didn't think of that. It would be acceptable. However the propper plate tool was $21.50 delivered. Sockets were around $60+ + post. I see no issue with adjusting the preload to spec with a torque wrench. Running the wheel side to side does not show...
  19. vk4akp

    Wagon tailgate lock problem

    Anyone got picture? I assume VY2 & VZ Tailgate lock mechs are the same? I haven't looked at mine yet but I don't suspect the solenoid. If I push the button in and let it spring out harshly a few times then hit the key unlock button again you hear the lock clunk and the button jumps a bit and it...
  20. vk4akp

    Help Needed - Ecotec Coolant

    OK you have me concerned about the inlet manifold now. I spent the night watching what video's I could find on replacing the gaskets. By the look of it this is caused by two bolts (one either side) that go right through into the water jacket for some reason? They run near a water jacket hole in...
  21. vk4akp

    big nut thing on steering rack??

    OK so. No Standard sockets are no good. The leading edge is bevelled in. The locking nut is very flat / thin and also bevelled down on the points. So not much contact area if any and generally not a good idea. Vice grips not even worth the reply. The correct tools are made for a reason. I...
  22. vk4akp

    big nut thing on steering rack??

    Over 6 months later and I'm still looking for the 46mm flat tool to release the steering rack pre-load locking nut. There is actually a torque setting listed for this also when tightening. The proper "Supposed" Holden tool listed in the workshop manual has a 1/2" square drive insert so a...
  23. vk4akp

    Help Needed - Ecotec Coolant

    I've got 2004 VY Series 2 's. Is there any difference? Is it still 12L fill Capacity? Coolant bottle seems to suggest 1:2 Mix ratio, not 1:1 as stated here? Is using De-mineralised water important? (It's only $3.50 for 5L from Bunnings). What if I don't pull the knock sensors? Is that...
  24. vk4akp

    The Research and Development Thread!!

    So will there be a "SRS Diagnostic Tool"(SDT) version that can be locked to a ALDL cable from you for it's licencing instead of locked to the computer? If so what sort of time line?
  25. vk4akp

    The Research and Development Thread!!

    So this is the new one where the software is licensed to the cable not the pc? And no time limit on software life?
  26. vk4akp

    The Research and Development Thread!!

    22nd September 2015 (Almost 5 years ago) :O Can someone please point me to the >>BUY IT NOW!<< Button for the ALDL Serialised cable and software? I'm concerned I might own a Tesla B4 I am able to reset my VY2 AirBag's. ;) :p
  27. vk4akp

    The Research and Development Thread!!

    So does the VX Nano J2534 scantool also do ALDL if one just wants to get the "Do everything" cable option?
  28. vk4akp

    The Research and Development Thread!!

    Cool. Can't wait to finally get rid of the AirBag warning on my V6 VY2. :)
  29. vk4akp

    The Research and Development Thread!!

    So what does the VX Nano J2534 Cost? And a link please to the correct item? I had a quick look online searching that key phrase and am currently unsure what and where to buy to be sure of the correct product? I have been procrastinating some time over buying some of your current software to...
  30. vk4akp

    big nut thing on steering rack??

    So where do you get the flat plate tool to undo the locking ring? I estimate it to be about 46mm from memory. And the hex inner adjustment to be 20mm. Holden manual says Holden tool numbers XYZ but Holden say they have never sold tools! Wtf! :(
  31. vk4akp

    Steering Rack Boot Grease. What type and where to buy?

    If power steering fluid is getting into the boots then your seals are gone and the rack needs a re-co. I believe it's to do with protecting the tie rod, tie rod ball joint, rack teeth, etc from moisture and dust. As specially once the boots start to split or perish.
  32. vk4akp

    Steering Rack Boot Grease. What type and where to buy?

    From the Workshop manual. In all the years I've worked on Holden's with rack and pinion steering this has always been the procedure so I have no idea what your on about?? :( o_O ["Apply grease to the corrugations in the rubber Boot and install"] Also ring Repco etc your self. They will...
  33. vk4akp

    Steering Rack Boot Grease. What type and where to buy?

    Actually NO. That's totally wrong and very bad info. That is the sort of thing that leads to premature parts failure :( Some reading for you. https://www.hemmings.com/blog/article/grease-for-specific-jobs/ And https://www.howacarworks.com/steering/how-to-lubricate-the-steering-system Also...
  34. vk4akp

    Steering Rack Boot Grease. What type and where to buy?

    Hi, I've got to do my steering rack boots and tie-rod ends before getting some tyres fitted. The manual says "EP Semi Fluid Lithium Based Type-O Grease" is the correct grease to use. (2004 VY2 Executive Commodore Wagon - Police Spec) However no one can tell me where to buy this grease. And...
  35. vk4akp

    Wagon tailgate lock problem

    No. Both wagon tailgate locks play up now. I'll have to pull the covers off and sus them out.
  36. vk4akp

    Teach me about Police Spec VY2 Brake Pad's please OB1!

    I ended up getting these. https://www.facebook.com/photo.php?fbid=10156422599126158&set=pcb.10156422599286158&type=3&theater
  37. vk4akp

    Waterfall inside drivers side front door :( 2004 -VY2- Berlina Wagon

    Hi Guys. I've been struggling with a weird water leak in my wagon. It seems to be coming from the overflow ports in the front of the bottom of the door. Heavy rain will see it jump over the scuff pads of the door and flood the drivers front floor pan. I've pulled the door apart and hosed the...
  38. vk4akp

    Wagon tailgate lock problem

    My wagon is back to doing the same thing but the rubber boots are now wound out as far as they will go until they are almost falling out. I also now have a second wagon (Berlina this time) and it's boot lock is problematic too. To open it you have to insert the key hold it turned or the button...
  39. vk4akp

    VY2 Berlina Wagon - H11 Low beam is a POS! :( Better bulb advice PSE?

    How about Bremaxx slotted rotors and Brembo pad's? Have you come across these at all? I see them on eBay and the seller is suggesting that they are very good?? .-.-.
  40. vk4akp

    How is VY2 V6 Idle Contolled / Set pse?

    OK. I've just found I have a log file from the last time I had a play with the butterfly adjust screw. I didn't do too bad with my guessing. But something is still wrong I think due to the rough idle. Back then I had IAC Step - 31-32 Fluctuating at idle. So I was close just by guessing what...
Top