Search results

hey mate, nice car. very neet. just wondering about your HBD throttle. i just installed one in my car. And the pedal moves in at the top without applying throttle but if you push in the bottom then it exelerates. do you get what i mean? just wondering if its just my throttle or if thats how...

i also have this on mine, its an anoying rattle noise that you notise when revs are very low reversing and in 1st (bellow 1500rpm) and goes away with more revs! did you end up solving the issue?

hey guys, trying to install a water temp gauge in my vz sv6. i though instead of installing the sensor that came with it i could splice into the existing one for the cluster coolant temp, however i have no idea were this is or what color? anyone help me out here? cheers

how about these i already have the pod holder in my dash so i just wanted something aesthetically pleasing more then anything...

how about these i already have the pod holder in my dash so i just wanted something aesthetically pleasing more then anything...

any better ideas mate? gauges you like? not to useful if you arnt offering better solutions.

gday guys looking to install this oil pressure gauge. just wondering if it will be fairly straight forward to install? eg. will the thread of the sender fit on the engine easily? thanks

thanks mate...also mate will this wiring kit be okay to power a 5 channel amp with a total RMS of 700.....cheers mate

gday guys, look at putting a 5 channel amp in (front splits, rear coax. and sub). Im running a pioneer avic head unit with only two RCA pre outs, and the amp demands 3. basically how should i go about this, i don't suppose there is a cable that goes 1 positive and negative RCA into 2 positive...

yeh thats what im looking for...looks like there are two screws underneath so im wondering if those can just release the end...or if they will dismantle the whole assembly. hoping somebody has experience with one...

yeh, im just wondering if i can remove the end bit and make it not visible, and still leave the structure of it connected to the car. basically not happy with it astheticly.

gday guys, not really sure were to post this so i just did it here. I have a vz sv6 with a towbar. Im looking to remove it so i can plug up my rear bumper and hide it for aesthetic reasons. im basically just wondering if i have to fully remove it or if the end of it can be slide out and...

thanks for that guys. i put a 25amp fuse in and it is working okay not sure if its safe thou.... the instructions say use a 16 gauge wire or heavier (which apparently 15 amo is) and it says to use a 30amp inline fuse (and i have now put in a 25 amp) so i presume this is safe now?

thanks mate, not to sure what youve drawn to as a solution then? bigger wire ? or you dont think the problem lies with the size of the wire or the fuse? and could be the circut shorting out or something?

just read that the horn needs 16 gauge wire. looked up on the net and it said that that runs 14 amps. so 15 amp wire and a 15 amp fuse should be sufficient? could it be that the inline fuse that is connected to the battery is a 30 amp wire? and that draws to much out of the battery and overloads...

gday guys, just installed another horn in my car to a switch. the setup goes as such: 30 amp wire (i think) with an inline fuse running of the battery, then two different 15amp wires running of the 30amp fused wire ( one to the switch and one to the relay for the horn ). I fired it up for...

sorry bout the quality its only a phone pic. are you interested? ( i have them advertised elsewhere as well)

ITEM: 2006 VZ SV6 taillights, Very good condition (will suit ss) LOCATION: Victoria eastern suburbs CONDITION: Used PRICE: pm me an offer DELIVERY/PICK UP INFORMATION: will post at buyers expense if need be PAYMENT OPTIONS: anything CONTACT DETAILS: PM OTHER INFO: Very good...

yeh mate sure is. ive herd some average things about Tint Professor. have you talked to people who have had there cars done there? Australia auto tint also gave me a life time warrantee on the tint. goodluck mate

yeh was thinking about getting one out of a wagon or something aswell, but there is a really think (probley a good 70mm) of the top of the windscreen blacked out as well!! its a bloody pain in the ass, donno why they do it! was thinking masking tape the bit i wanna remove and try things like...

yeh i no, i found one out of a wreaked vy. but the problem is that part of the windscreen is blacked out so you wouldnt be able to see the light!

yeh thanks mate, worried that might look a bit takey thou....if there was a way to remove the blackout lump it would be ideal, because it would then look factory...

which side is the self adhesive strip on? design to stick on the inside or outside of the windscreen?

yeh it was more to the fact that i dont want some bloke running up the back of me due to them not seeing me braking!

gday guys, going to despoiler my vz sv6 so i need to (legally) put in a 3rd brake light. Was going to put it in the parcel shelf were the usualy sit, however the windscreen is blacked out there. Is there away to remove that easily or is there a better way to mount a brake light??? thanks for...

Id defiantly give Australian auto tint a go. they are located on marondah highway near car city. Got mine done there and im wrapped with the job and the film is really high quality with a life time guarantee!

hey mate, ive got the same problem, very low revs on a slow take of and it clunks then you get the low trac. warning. Im pretty sure its like inside the diff the teeth grinding together and its a common fault with the vz sv6 6 speeds. sometimes mine wont do it for weeks, then one day i might get...

thanks guys, there was actuly 3 or 4 orange wires there, couldnt believe it! 1 fuse later, it ended up being an orange one. thanks guyss

gday guys installing a new headunit at the moment, the constant power is ment to be orange/white. i have no wire this color and am not sure to do? has anybody had any other colored wires? or any ideas what to do? cheers

i ment it has no cupholders the fold out next to the a/c controles, and its not climate control either. would that fit? i was looking for vy but then this came up really cheap!! also looking to get it before i get my conversion torquative:) EDIT: the entire dash. eg. from the top bin down to...

gday guys, just looking at putting a vz ss dash into my vz sv6 and wondering id it will fit alright? the vz ss dash doesn't had the fold out cup holders or climate control so i thought it would be alright? cheers

06 VZ sv6 manual - Street Commodores Online Forum

if i went with the kickers, i thinked id go with this amp and run them at 2ohms, your thoughts? Also by "thumps really loud" im after something that can go really loud without compromising sound quality to much. with regards to the bass joe..... i don't listen to much rock or fast techno stuff...

thanks mate, just wondering what thats based on, have you herd either of them? cheers

gday guys, Im looking into sub woofers at the moment for my car, and basically just looking for something that thumps really hard but still clear and good quality. Was looking at these subs from kicker. and then thought for the same price i could get a single type X . just wanting...

gday guys. looking at installing a additional set of lights to come on when the parkers do (and powered by the same circut/wires), just wondering if someone can inform me of what color the positive and negative wires for the parker lights are. thanks guys!

what about if i have side airbags? isnt that in that same pillar?

hey guys, figured out in the roof the the: orange w/ black stripe wire is pos. black w/ blue stripe wire is neg. for the courtesy light circuit. i tried splicing into some smiler wires down near the throttle pedal, it caused the light to stay on continuously except when the aerial went...

picture of wires. took out the over head light to have a look at the wire, i though if i spliced into the green (neg) and red (pos) then my lights would work with courtesy lights? were will i find this wires closer to the footwells (runing down side of car?) because id have no idea how to run...

thanks for the info guys, what would be the best thing to use to get it of (seemed very very firm when i tried to pull it) eucalyptus oil? heat it with hair dryer? ? EDIT: just read the bit about the razor blade, will this scratch the glass?