It takes just a moment to join our fantastic community
Check the fusible links near the battery terminals.
There's a lot of people who worked in the airline industry in 1989, that wouldn't agree with you...
Factory cat back should be 2.25".
Fit your bi-modal valves to the current mufflers.
You wont be disappointed with the 6000K kit.
Just use decent oil and change it regularly.
It should fit, but there is a slight difference with the rear oxy sensor positions.
VE has rear oxy sensor in the cat back, just aft of the...
The lock might be damaged. The lock should freewheel if you use something other than the correct key to unlock it.
Its normal, they have a cycle time.
My dealer use AC Delco oil, blended locally by Fuchs.
My Maloo has an oil temp gauge, usually takes about 20 minutes of driving to get to normal temp.
Google Ultimate Conversion Wiring.
Hope you only cut it once, though!:D
Give it a really stressful pressure test, do it when the engine is cold...
My S2 Redline ute has had numerous Android and Apple phones paired to it without any problems.
Just measured the opening in my garage, it was 2.37m between the door runners.
Don't need to fold the mirrors to get the VF in, probably a couple...
Just reuse the sleeve, spring and top hat when you dismantle the factory suspension unit.
Depends on the strut top material. The factory rubber strut tops and Super Pro polylast strut tops don't need greasing.
Urethane strut tops do...
Shouldn't be a problem if its maintained properly.
Maybe they were eBay LS3 badges...
It's your 'right' as a consumer to push for replacements, ask skylarking for advice.
Have you had the rotors inspected and measured for thickness,...
They wont replace them unless they're below 'minimum thickness'.
The info you need will be on the VIN data plate in the engine bay on the left strut tower.
Not the ECU getting too hot, then chucking a wobbly?
Pretty sure that's not required...
I think you'll have to remove the headlight to see if its fixable, might require a replacement headlight...
No, not in the L77's.
The bad reputation came from the original lifters fitted in the L76's.
Updated, and better lifters were fitted in the L77's.
Was it a 2.5 litre Sube engine?
Need to do a compression and leak down test to know for sure...
Its just simple modifications! Find a better exhaust shop...
Have you enquired with a HSV dealer about buying a wheel?
If they ask for a VIN, let me know. I'll pm my Maloo VIN.
Holden's engineers just copied what HSV had set up for the E series, which was probably copied from a GM USA vehicle.
20,000 sedans only!
Cant help with a part number, or comparisons with a 'Walky' wheel, but the steering wheel on my E3 Maloo is the most 'comfortable' factory wheel...
VE charging system is very similar to the VF system.
Car Care Products! When ever I make an order, I'll get 5 of these.
UAW probably had something to do with that, like no wagons, no utes...
My E3 Maloo seats are so much better than my Magnum seats, just lack seat heaters...
Separate names with a comma.