It takes just a moment to join our fantastic community
Thoughts on the RS3 mate?
I'm running them on my car at the moment, I've found them to be very hard. Cope well with more laps/hotter days but...
Size is 12x1.5mm
Good point mate!
You'd be surprised how common the leak I mentioned above is, not visible unless the car is up to temp and running, even then it can still be hard...
Very common problem is a leak around the join where the end tank meets the radiator core. It will only leak once up to temp/under pressure, so if...
Disconnect all rear speakers
Connect front speakers to the amp
Switch rear RCA's to sub, connect to sub
Those PRS amps are great, good choice Nic
In a university library :(
Check the date of the last post :)
You can cable tie it to your ABS module or anything like that, also to your battery clamp (thing that holds it down)
Or you could cut out a piece...
Rear bar with parking sensors + side skirts still here
I'll take any offer - need the room in my garage!
Rear bar and side skirts still available, all else is sold.
Please make an offer if interested :)
Tail lights sold :)
Listed on eBay now, if else is interested please send me a message and we will sort something out.
Price drop before everything goes on eBay
Tail lights $80
Front bar $50
Rear bar with reverse sensors $50
Side skirts $50...
No worries mate, will do.
Not at the moment, I want to try and sell that part complete.
Or if you were racing.. Your Commodore..
Ahh, didn't see where he was.
Abba: Very true, I don't often see it adjusted though, or at least not at the shops I've been to.
As above ^
Such a common car, the aligner should know what to do. The castor isn't adjustable and front camber isn't adjustable, rear may be...
DELIVERY/PICK UP INFORMATION: Pickup or post - please send me a PM for postage quote
PAYMENT OPTIONS: Cash, bank deposit,...
Nice, clean example mate!
What sort of rotors/pads are you putting on the front?
Just to get the ball rolling, DBA 4000 rotors and QFM A1RM /...
Can you reset the ECU on the unit itself, without disconnecting the battery?
Nic, can't you use any thinner wood?
And perhaps just use an MDF ring to mount he speaker, try and install each mid on an angle toward the driver?...
Really? I thought they were boomy and inaccurate, muddy bass. Did not like them at all.
Man XXLS is a really great SQ sub, budget and space requirements aside. I was trying to choose between the XXLS and my Mach 5 for my car. It'll do...
Yep, hard lines run into the radiator. The shop even said "use two hose clamps or the hose can blow off"
Doesn't seem like the best way to do it,...
Following up on my previous thread (Towbar) I am now looking at transmission coolers to fit to my VY V6.
I had a look and the...
Hands down, Peerless XXLS.
Clutch cable grommet, driver's side near the BMC.
Into the cabin, remove the sill panel and rear seat, run it through the cabin and into the boot...
Yep, 1200kg and 1600kg have no bracing, the 2100kg has bracing to spread the load out. I'm looking second hand, I'm in no rush so will keep an eye...
Damn. So my sub box would need to be completely removed?
Body I don't mind! :P I know it's not going to pull apart or crack the subframe/chassis rails in the short term - long run I can't say. I just...
Thanks for your help mate, just the information I'm looking for. I've included a few pictures of the sub box for reference, it might have to be...
Separate names with a comma.