Search results

Hi guys, I have a 2007 VE ssv ute. I am wanting to install a reverse camera to the standard ssv head unit. But i would like to have Vehicle in motion disabled, and purchase the rear aux video input cables. Does anyone in know of any places in melbourne that offer this service for a good price...

Gday, Had a natrad radiator installed 3 months ago then started leaking transmission fluid from the trans cooler (inside radiator) so had that replaced under warranty. 6 days later pissing out coolant from the bottom plastic tank... Manufacturing problem or could there be somthing going on...

Hi mate, I dont think it is a flare nut, it is a quick connect fitting with a small spring clip that needs to be removed to remove the line. Seems to be leaking around the nut thats attached to the radiator ive tried turning this and is just spins but does nothing so im assuming its not meant...

Hi guys, Have a 2007 ve SS i had a new radiator installed and new trans line 3 months ago and it seems to leaking alot of trans fluid around the rafiator attachment. We all know this time of year is impossible to get any parts. Does anyone know if the fitting at the radiator can actually be...

Ive rang a few places in melbourne and have been told it cant be done? Somthing to do with all the sensors etc... What had to be done to make yours work?

Awesome! Are they just plug and play? Are they expensive? Cheers

Hi guys, Does anyone know if the electronic blind spot detection mirrors from a VF can be installed onto VE?

Hi mate, its a v6 auto ute

So tonight i raised the car and was only able to get a very very tiny amount of play in the uni joints it would be 1mm or less jiggle. As for around the centre bearing the rubber is still in-tact with small cracks in the rubber but seems to be fully in-tact... Thoughts guys? It only happened...

No worries, even an intermittant problem? Or would you expect more of a constant vibration from a joint? It sounds exactly like driving over the bumpy highway edge road markings and lasts a couple of seconds then stops

Thanks for the feedback mate! I will check them out! Cheers

Hi guys! Driving the vs ute today and occasionally when driving it gets a shocking vibration through the whole car. The best way i can describe it is it sounds exactly like you have driven over the bumpy road markings on the edge of a highway! Only happens occasionally for 2-3 seconds at speeds...

Hi mate, From what i have read on the forums your the man to speak to regarding brake upgrades. I currently have a 2007 ve ssv ute with 20" super sport wheels fitted. I am looking at the brembo front brake calipers with slotted rotors and braided brake likes. Im located in Aspendale, vic...

Thanks mate, from i can gather so far is even if it is second hand it will work except oil temp will display 0... What would be an expected price to pay to have the oil temp perametre enabled via Efilive? And who does it around melbourne? Cheers

Lookup on facebook " Automotive lighting customs" they install them all as a kit and the prices are pretty affordable. IQ in your series 1

Hi mate, Im wanting to change my sic 2 gauge in my ssv to a sic 3 gauge display and have heard you are able to enable the oil temperature on that gauge? Are you located in melbourne? Cheers

Approx cost of having the parrameter enabled?

Thanks mate, Who does efi live? Dealership?

Thanks mate, but once again the thread doesnt have a final answer. It cant be programmed by holden to display the 3 gauges on a 2 gauge display. I have to buy the 3 gauge display but id like to know if all 3 will work or if if has to be progammed to recognise the screen.

Thanks for that mate, but once again the thread does not give a final answer.. So far all i can gather is i need to buy the SIC 3 gauge display and plug it in, what id like to know is will all the gauges work or will it need to be programmed? Many threads on here from a while back but they never...

Hi there, I have a 2007 ve ssv ute, my ute currently has the 2 gauge display above the air vents, but i would like to change it to the 3 gauge display from a later model ssv, Does anyone know if the 3 gauge display will just plug and play? This is what i have currently: This is what...

cheers for the help fellas, have been a good help. i know the price is higher than the other kits that can be purchased online or at a shop, but the ebay kit is an all in one kit that only requires it to be plugged in as the ballast is all incorporated in the cap and i dont have to drill any...

Hi mate, I got your message regarding the hid headlights from ebay. Very easy to install? Do you live around southeast melbourne by any chance as you are the only one i know with them. I am based in mordialloc. Cheers

Cheers PIRATE, would you say the HID push a further, brighter distance ahead? were yours the plug and play kit? cheers

do you buy genuine transmission service kit for the 6l80e or aftermarket?

I like the idea of hid headlights on the ve, but have not seen one at night. I am interested in installing this kit from ebay as it is a plug and play kit with no extra wiring/drilling involved http://pages.ebay.com/link/?nav=item.view&alt=web&id=120730220193 Does anyone in southeast melbourne...

i am interested in the plug and play HID headlight kit from ebay but i would like to see it installed and in action before i purchase. anyone in SOUTHEAST melbourne and and to let me have a look at the HID at night? Cheers

I have a vx srII calais super 6, about 5 months ago my diff was rebuilt to remove diff whine etc... my car has always had a slight vibration around 60k and once noticed rear cv axel wobbling, but was intermittant, anyway have sent the diff back regarding clunking through gears etc... they are...

was there any difference once the rear driveshafts were replaced? my car is getting the clunk when downchangeing or accelerating and releasing, also occasionally a faint vibration (not tailshaft has been balance), have heard that replacing the rear driveshafts on vx can minimise clunk?? how did...

tranny try getting it plugged in at a transmission place, sounds like shift solenoids are on the way out