Search results

Hey guys my 14 ssv redline has developed a front end knocking noise when going over bumps and the angle of the ground changes. It has ultra low King springs and standard shocks. Took it to a trustworthy mechanic that has been good to us for years. He inspected it all in front of my found no...

this is the cam i will be running in the new motor when i finish the build. Grind # XA232/365-XA244/355-11+4 Aggressive Street / Street-Strip Duration at .050: 232/244 111 Lobe Center Angle with a 107 Intake Centerline Lift with 1.7 Rocker Arm Ratio: .621"/.604" Usable RPM Range: 3000-6700...

Cheers mate fair few of these setups done now and not many people know how to set them up.

Hey guys chasing info on setting up Victor junior manifold. There's some sensor on the rear of the standard manifold plus breathers from the rockers and the fuel line breather thingy that runs to the stock throttle body. Will try to get some pics when I can. Cheers guys

No worries was just asking. This is my first new car and I've never had coilovers before. Always driven around in bunky vu ss and vy ss skid pigs with second hand springs. Was wanting to do everything to the redline properly.

was assuming the chevy ss would be pretty much the same.

chasing a cheaper but still decent quality option.

hey mate sorry for digging this up. I have a 2014 VF SSV Redline and i also got brand new 1200w mb quart mono block at home was hoping to hook it up to the sub i have aswell. (they were planned to go into my vu ss but that can wait). Question is can i hook that amp up to the standard amp wiring...

M01ST submitted a new Showcase Item: 1981 Holden Vl Read more about this showcase item here...

M01ST submitted a new Showcase Item: 2015 Holden Ss-v redline Read more about this showcase item here...

M01ST submitted a new Showcase Item: 2001 Holden Vu ss ute Read more about this showcase item here...

hey guys just wondering if anyone has found any decent price coilovers from the states? And whether the chevy ss units are the same? Just bought a new ssv redline and dunno whether to go coilerovers or springs. Cheers

Spray what? Was just gunna build it all in my shed myself. What size cam do you reccomend.

Hey guys need some info please. Plan is to build a high compression motor and run e85. I have a victor jnr manifold plus throttle body and will be running a 232/234 112lsa .598 cam, underdrive pulleys, double row chain, 241 heads ported and all the valve train gear already done. Where I...

dude if u can wait 2-3 weeks go this ACT Clutch Camaro Corvette LS1 LS2 Heavy Duty Street | eBay and i also purchased a yella terra lightened flywheel for my cammed vu ss and its good to drive on the street and has a good feel to it also make sure u change use spigot bearing and thrust bearing...

Hey guys just wondering if anyone knows of somewhere where you can buy a dash fascia that will accomadate a single din stereo and 2-3 autometer gauges in the stereo slot of a vu vt vx? Cheers

Hey guys blew the box in my ute today so was wondering what's involved In a auto conversion and rough price it is cammed so most likely go decent stall aswell?

Change the battery if that doesn't work i hope it hasn't screwed ure computer?

Hmmm just bought the edge 10w60 and now I'm reading these noisy comments haha **** it's not cheap either. I also purchased 5 liters of redline super light gearbox oil that definitely aint cheap does anyone know the refill in a ls1 t56 btw?

Bump please someone shed some light?

Hey guys my vu ss has started to get stuck in 5th gear when the happens I need to pull over and wrestle with it gently and sometimes I get quite aggresive haha to get it out. Anyone got any idea of what it would be? Btw 6th gear syncro is ratshit grinds on the way in.

Got a cammed vu ss ute just put a twin 2.5" exhaust on it and it sounds poo got a set of centre mufflers and rear mufflers what should I remove and replace

I got rid of the single 3.5" and got twin 2 1/2" on my vu ss it is cammed but the new exhaust sounds **** its way to quiet wondering what setups you guys are running on utes? It's got a set of centre mufflers and set or rears was thinking of taking rear ones out? Or replacing them with hotdogs?

Will a 08 ve ss exhaust fit a vu ss?

Ok guys got a 410rwhp vu ss changed the clutch master cylinder bled up all good but now when u give the throttle a stab the clutch will give a quick slip then grab?? Any ideas the master cylinder is adjusted to 10 mm of free play

What about fuses?

Mate changing gearbox in his vu had bonnet open for a bit of light when he closed it forgot about a screwdriver sitting on near the radiator next minute big hole through his brand new alloy radiator and a massive scratch down his Otr.

My car normal then my car with ve gts rims

Really need it more side on I went to town on mine haha

Just thought I would let everyone know of I iPhone app I found its call "vrimz" and allows you to change your rims on a picture of your car and has massive amounts of rims on it from HSV speedy advanti

It's a cammed vu ss ute standard diff gears manual h/d clutch 25% underdrive pulley

Yer but I'm thinking the twin 3" will have a lot let back pressure causing less power but however will heaps better?

Got a 410 hp ute with single 3.5" exhaust, was wondering what would be better twin 2.5" or twin 3"?

Oh really? I thought it was just the back end/suspension that was higher

Does a vy crewman hardcover fit standard vu vy vz utes?

Fuel pump fingered or the fuel filter blocked?

Don't mean to jump in on your thread mate but I havnt worked out how to pm on tapatalk anyways NAAF how much for twin 3 inch with and without highflows cats will be running on s 400+ rwhp car? Shipped to 6055