Search results

Going to be fitted right after the cats, before the resonators. Just hoping there isn't any issues wiring them up.

Naw 3inch full exhaust. Keen to get them though. Takes a fair bit of time as there made to order, then to ship from us to aus

Getting some Kingdigit exhaust cut outs, they need to be hard wired and a switch put into the cabin. Got the exhaust place fitting it and hard wiring it. Thought id come on here and ask if anyone has some ideas on which way is the best to hard wire it and best way to put in the cabin without...

Sometimes the button on the drivers handle doesn't lock the car when I press the button and I can hear the actuator move inside the door. When I use the key it locks it's all the time. Been like this for awhile and I've gotten used to it but thought id under take a new little project. Any ideas...

Fallen Azenis outclassed all these tyres in all categories in tyre of the year magazine.

Cheapest is always going to be a used set of hsv tris. Don't know what they sound like though, can't imagine they would be the same as rex or xforce

ahh, no. Put the charcoal filter inside the cabin filter.

Awesome post! Didn't even know there was such a thing! Dumb dumb here, where abouts is the filter located? Also any links to where you purchased it off eBay?

Keep some aside when your making massive power, because youl end up no doubt breaking things!

Can't outshift an auto!! Makes a big difference even if the manual is making more power. From what I've noticed on power figures a full exhaust otr tune on both s1 and S2 are 30rwkw in favour of the S2. That seems pretty accurate on GM motorsport dyno. Depends on how much mullah you got!

Cutouts are on my list, AES mufflers make the best ones apparently because when they are shut they don't leak sound and seal tightly unlike xforce or other known brands. Highly recommended by all the people that have them. They aren't cheap, from memory it was 500$ for one! So for 2 it was 1k...

Put a hybusa motor in it. Stuff it put 2 busa bro engines. At least then it would be worth the hassle of stuffing around.

Think half of that lumpy idol is due to the tune as well. Id do some search options in the search bar at the top.

Big jump from going from a full exhaust to compressed air. There's a reason why cam heads worked engine is a building block to boost.

Depends on what firmware you currently have...

Remember when you had to wind the windows. **** as a kid that was hard work!

When you get in a another car without HUD and realise you have to look at the dash

Ah, good product but for double the price. Yeha na

didn't DPE go broke? Yeah there systems sound the best but they are utterly expansive for some metal especially when there are other good brands outthere for a lot cheaper.

He recommends Hurricane, don't know specifics but I know the videos that he uploads he says he changes them quite frequently because they don't flow enough. Could be just a money grab, but he doesn't come across as that person.

He refers to the headers being restrictive

Heard on marks work shop he said dpe are quite restrictive. YouTube him he's in WA and does heaps of work on our cars

Look at walkinshaw they all seem to make more power than anyone else.

Can never beat a full exhaust system. What else do you have fitted? I've got gm rex headers and cats with 3inch catback mild steel xforce. Wouldnt mind more crackle, what would achieve this?

Why is fuel so inconsistent? I've only used 98 in my tuned l77.

Gigglebit

This question is suitable for shitbook I mean Facebook. Aka what exhaust is best for my sv6?

Understand what your saying but it's definitely not used friendly. auto glym don't need to stuff around with stupid names and they create a good product. I laugh at some of the Bowden's stuff but if you have ever been on angle wax website and looked at the products it makes you read through them...

Hate the names of the products they use. They make it sound like you need to be a professional to use there products. Angel wax are the same. Also when I use the auto glym canabara wax, I notice that it works for months. The other week I was running late to a car meet, so decided to go to car...

Where you guys mounted these? Not looking at drilling or screwing into anything!

Hiekit and made seem to be the cheapest but mace website is a pain.

A good wax, not a wax out the bottle. I use autoglym canabara wax on mine and wow you certainly notice it. When I just do a wash I top up with aqua wax by Auto glym.

Modern day paint is so versatile, it cost me 450$ to sand back and respray a hard lid for the ute. Keeping that in mind if you wanted to just polish and wax every 6 months, if go that option, I also remember you saying your an old fart? Id suggest paying someone who's actually a professional to...

Oh okay, too be honest I CBF going through all the posts to find which one is the best one. Rev high do the throttle controler? Idrive? What are the other ones?

It is yes! Happens to mine all the time.

How bad are they actually for your cars? Having all that torque moved down the lower rpm range? Would it even change the 0-100kmph time?

One that doesn't end!! Hence ive only done a full exhaust on mine, power is never enough! Hence ive gone for the better tyres and whatever money buys without going for powwwwwer!

Can I stick a Mexican badge on there?

Too be honest, I've seen an all black one lowered with 5% tint and thought it looked okay. Still would be hard to get me in one. Also the VFS just look better and the interior just look world class!