Search results

just had it on a jack and the engine mount is stuffed but looks like there is still clearance between the bar in the engine mount and the frame Plus it sounds like it's coming from the back of the engine while i was underneath it and it's the right one that's smashed and when it's under...

alright, i'll get it down back today check those pins. Thanks for the info will really help try and figure this out. the noise sounds like it's coming from the drivers side more towards the engine so it shouldn't be the trans mount and could just be the engine mounts.

i'm almost at the ropes end with this car, i know the engine mounts the right hand is stuffed the left is on it's way out they're both sagged. someone mentioned to me when i was trying to figure out what the sound i was hearing coming from the engine/gearbox when the car idled. mentioned that...

wow my email notifications stoped working. having a poke around under the car you can see that the left front caster bush on one corner isn't flush like the other side.so for one that's why i'm thinking it's the bent Caster Rod. i have a second hand Caster Rod and LCA coming in the mail in the...

all right thank you.

seen a few vids of front end work on slightly later models (VT, VX) where they remove the calliper and rotor with the LCA. is that necessary?.

do you think it's worth replacing the LCA as well or just replace the Zbar and see if that pulls the wheel back forward?.

got a bit of a problem, when i bought my VR and drove it home it drove fine. but when you turn left and there is moment (rough ground) in the suspension it rubs rather badly. having a look recently and you can see that the left front wheel is pushed back and inch or two compared to the right...

LostPup submitted a new Showcase Item: 1994 Holden Commodore Read more about this showcase item here...

VC i know what you're saying and i don't want to but it gets me on the road it gets me a job. but if i come into a bit more cash which is looking likely at this point i'll be useing Bendix pads and new rotors front and rear if i get this money so here's hoping and definitely going to be looking...

i get what you're saying ephect, i'm not that kind of driver. To Hotrod i know what you mean when it's you get what you pay for, it's $45 for the front and rear kit not just for front or rear. the front rotors atleast are rippled and don't have enough to macine. the plan i hope is to find...

Hey guys/girls, first time posting here. bought a VR last week and only needs a few things for RWC. one of them being the brake pads. i need a cheep replacement for now to get it on the road and then do rotors and pads firther down the line. but for now i just need something cheep. i found a...