I have a 355 eagle not Chinese scat for sale new rebuild red heads or vn I charge 1/2 price because I don't have overhead costs here is a red head I built https://www.aussiev8.com.au/holden-v8s/27306-got-old-vl-dynoed-2.html
thanks EYY I've done many auto rebuilds , mods including trimatic 450 hp mods/parts i'm looking at my 460 for a shift kit and have delt with transgo 25 years ago -good to know they have a good kit for the 460 - Ken
crank is prob ok, why go stroker just better rods and pistons if turbo, your going to have to spend big bucks on trans ,diff . are you willing to spend $60,000 cause that's what it would cost , iff you got someone to do the work -$100 hr ,114 lc cam -turbo
DEMAND SHOUL SAY BUILD THEM BUT YOU CAN'T GET 4 1 3/4 PIPES TO GO BACK
HOW DID YOU DO IT? BASH THE BODY TO MAKE ROOM -YOU DONT DO THAT TO A BROCK ,ACORDING TO A ENGINE BUILDER 4 INTO 1'S ARE WORTH 60 MORE HP OVER TRY Y'S , AS FAR AS 100'S I THINK YOURexaggerating SCUSE CAPS
I tried to put comments after car pics but no room - I don't know why it put up 2 pics
I have edited some comments/posts on this site , I have 4500 threads and posts on another site as well as hot rod and other motorcycle sites , I don't know why this site is different
by the way I've built...
it runs 1 3/4 to 3" twins from extractors into gutted cats - another power increase , into 3"y to
tail , all mandrel bends put together in my workshop - boilermaker
it rumbled and got the police out of the station to come and see what the noise was coming from but I had already gone into the...
it was devoped by rm Williams
that's why I asked what am I doing wrong , click on image put in url, come up with img
actually 477 hp 460 was aim
twists body under acceleration, ease the throttle on even at 130 or wheelspin
what am I doing wrong ? the vl does not allow 4 into 1 which can give 60 more hp so I did what a ford guy did in America - jack roush run the front pipe forward flatten under crossmember to go into collector slip fit , 372 ci. run 460 engine hp b casting heads ported by me another site said it...
crane made to order custom cam, new 308 pistons made by ross . 6"chev alloy rods
can anyone tell me what link to use to post pics ? i'm on other sites where it's straight forward, the engine was built by james lewin that worked for mendham
engineering,it youst to 3 foot wheelstand in a hj...
I need a wiring harness -or knowledge on how to wire to 308 I want to build a brock look alike -Ken I've got over 20 308's including a hp block -high nickle content and a 4bolt block that ran to 9000 with a [email protected] CAM 675 LIFT
yeah 731 hp is posablle I have got a link somewhere when the ls6 is standing on the rear bumber http://www.superchevy.com/how-to/engines-drivetrain/0910chp-trick-flow-cylinder-head-insight/ it was only in the 60's pro stock was pulling 600 at 9000 rpm grumpy bill Jenkins...
post more pics, hornet scoop today, cam this week then new lifters and 1.7 rockers and heads, will hasn't fianalised yet but the cats in the bag ,can't find pics
yet got hundreds, I shoud have said moneys in the bag but parts are coming in