Search results

*wink*

Saw a few videos online before I got it but didn't realise how many parts it is actually made of. This blew my mind.

Started on a little build. Will keep me busy into the new year.

Evap shouldn't be too noisy. May be worth mentioning to them as it may be faulty.

This is what happened to an rc pack I was charging last weekend. Started smoking and hissing so I threw it out into the middle of the driveway. It was being charged well below it maximum 1C charge rate and was just over half full and not previously puffed. I have seen a few RC youtubers post...

Doing some work replacing a water tower as part of the SA Water network in the Riverland and found out they have another water tower nearby to replace. We went for a drive to have a look and it was pretty cool. Full concrete support, it was like being under a waterfall it is leaking that...

I felt no guilt about trading our old prado with a cracked head and a couple of other issues. Dealer looked out the window and gave us a price. Not an awesome price but still more than I would have made after fixing all the issues and I didn't have to spend the time either

Does this mean my nuts are tight?

I got the puncture heading up the freeway towards Crafers right in the middle of the tunnel. Way praying it wasn't a steer tyre as I would have had to change it on the side of the road instead of my driveway. This is the biggest problem. I need an extension to get the handle outside the tray

Inside f'n tyre too

Am currently sitting around the pool at the Loxton pub and the cars cutting laps. All very tidy 50 something caddy HJ stato with big scoop making loud noises XD sedan HR sedan XY just lumping up and down the road Friday had LJ Torrie Bog stock 5.0 VN executive

Helps if you don't drive through the fence to get to the basketball court

Can't see anything useful. the size is one issue and I cant adjust it up far enough to see anything further back than the back wheels

Registered, Washed and just doing a few bits ready to go watch the Bay to Birdwood tomorrow

Made a call to an engineer about a little project I have in mind. Waiting on a call back to discuss more details.

Banks. Again. I'm in Deniliquin and my bank seems to have cancelled my card. Used the last of the cash I had to pay for fuel. They have no customer service on Sundays or public holidays and I still need at least 1 more tank of fuel to get home.

Now you have two it's time to race on the go cart track

It was just cricket training

Taking my eldest to cricket on Sunday we had a li e of about 20 Lambos heading the other way. ti me they just looked like Lamborghinis but the 10yr old super car nut next to me was telling me what each one was.

The big lump of aluminium out the front cuts out a lot of the spread.

The info from here is why I chose them

Another day on this project.... Took all day but got both sets of headers in. YAY. Started well. Dropped the rack, slid the pipes in and no go. Couldn't get the separate pipe to line up at both ends and it also clashed with the starter. After hours of taking the whole lot in and out a bit...

Spent about 3 hrs last night starting to remove the old exhaust manifolds and cats. The hardest part was the connector on the driver side o2 sensor as it was jammed behind the trans dipstick tube and I struggled to get it undone. All the bolts in the head came undone, the only issue was the...

Well, I still haven't dealt with the leaking sump/rear main. But I had a big delivery today A pile of bits to make the cat pipes and a set of Manta 4 into 1's Unfortunately with only 2 weeks till Deni the Manta cat pipes are out of the budget. I am very much looking forward to rolling...

We have just purchased a new 2nd hand car and it seemed to be the yards that had both new and used cars were like this but the dedicated used car yards were the ones that were very pushy .

Did some work on a bonnet I had lying around in preparation for Deni Not everyone's cup of tea but it is a bit of fun. Currently have a convoy of 9 utes heading over. Ran out of black vinyl for my cutter to finish the stickers.. Ordered a heat press to make some custom shirts for the trip...

Found another lowbeam blown on saturday so got some LED's . Went for the Philips Ultinon Access H11 as the Cross8's have projectors for the low beam. forgot to get LED parkers which really stands out now.

I was digging through some old stickers tonight and found this gem. Must be worth at least $500 with Holden shut down now.

Just burn it

Got the apprentice all set up to do some jackhammering and he came over 5 mins later with pull cord in his hand. Not an easy job on these generators. And great fun in a motel carpark in the dark.

My partner took the ute to get a load of firewood earlier in the week, I got sent this picture later in the day with a lot of sorrys It is now definitely christened. Managed to push most of it back out and made a special sticker It only shows when the hardlid is raised.

The worst part is its fairly likely that they have more than just Losh that they are working on.

I think the saying you are after in this case is 'No honour amongst thieves'

It's just something about us plumbers with our nipples cocks and flanges and then what we call these.

I'm sick of dealing with other peopled dogs and cats at the moment. Our front lawn is quite often the preferred location for dogs to unload, very few are walked on leads around here. Currently our back doors are the target of 2 cats spraying at night which our CCTV clearly shows collars on...

That's ok if you have a decent saw but a 4/5in grinder with a diamond blade is just going to be a waste of time. As others have said a propper concrete saw to cut it into pieces would be ideal but losh's budget and available tools make this difficult.

Following your progress with this project makes me appreciate the resources I have access to through work as well as the skills and tools I have acquired over the years. I get frustrated sometimes with friends and family always asking for advice/assistance with what seems so me to be simple...

Made a new coat rack. Our current cane free-standing unit fell over and flattened one of the kids and my partner said maybe you should make a coat rack to match the key rack. Got Dad to collect some railway spikes years ago in preparation for just this project, also cut some redgum slabs at...

People that don't indicate. We have a 3 way roundabout near home that all 3 roads are equally spaced so you are either turning left or right. 80% of cars that I see there don't indicate either way. The people using the 3 lane double roundabout near the city are better behaved

I'm still not sure why the circuit breaker in Fu's box is 25A. Both my 10A plug ones ha e a 10A breaker in them