It takes just a moment to join our fantastic community
It was a general observation of the product,
I'm not shooting anyone, I was just wondering,
I never said and/or implied you said it.
Assuming where they mean Oil Pump,
they mean Fuel Pump.
On a side note,
My Father had a toggle switch in the ash tray of his car years ago, with the Starter Motor Solenoid switched through it.
The other 2 options that come to mind
Is locate the Starter motor solenoid wire, probably just 12 Volts
the Auto Shift Inhibitor Wire/s, also...
No average dumb car thief will have a flat top/bed tow truck,o_O
In saying that, the fuel pump on a VE is controlled by a"Fuel Control Module"...
Sorry I tried to help out, and didn't read it properly.
I deleted my answer.
Most L76's [I stand to be corrected if I am wrong] & L77's will already be E85 compatible,
Unless hey have been modified.
Even the VE V6's in...
I would also say,
Most likely would not work the Windows CE IQ system.
Yes, that is correct, a SD Card Update for the VE Series 2
I have the MY16 currently I got from eBay,
where I read somewhere the Guy got busted...
As for the for Maps Upgrades for a 2012 VE Commodore IQ System, and for the case of the exercise,
Any one interested in splitting the cost for a...
@Trevor loves holden.
Ah yes, The Car Flu,
I heard its pretty bad this year !
I forgot to ask,
Does it have a Super6 in it,
or its it a stock L36 ?
I had a issue with my L77 of recent, well it was caused my me,
I did a Complete Pulley change, and putting it back together, [as I took the...
No, Police mode is usually the Digital Display activated on the Dash, and has no relevance to battery voltage.
If you go through the engineering...
The only way is disable the immobilizer is with a Tech2.
I would get it scanned first before spending any $'s on it,
as that will give you a starting point,
Not every DTC will activate the MIL indicator.
May the force be with you !
Definitely a rare find being one owner and service history,
especially a 2002 model,
If it was me, I would be snapping it up.
Sounds good to me ;)
If you retire one of your existing VX's, you will have spares that will last a while :)
As long at is Roadworthy, and in good condition inside,
I would snap it up, get the ding in the guard fixed, or source a good second hand one from...
I try and keep it all OEM,
but the price is sometimes over the top for some of the simple parts.
Where direct OEM replacement is usually good....
Dear JC's Members,
This maybe one for the books, and/or memory banks.
I recently had a small issue with my L67 idling a bit fast [approx 900rpm...
Plus 2 !
I tend to agree with greenacc & Imoengnr, :)
I read the aftermarket ones are not compatible as they make out,:mad:
Go with the Bosch ones ;)
Ahh, The Great Aussie Holden build for Australian conditions :eek:
“I love a sunburnt country,
A land of sweeping plains,
Of ragged mountain...
I would suggest you de-grease the whole engine, and engine bay,
Then you have a fresh/clean start to find where it is leaking from
Engine Oil -...
Here is a bit more information that may also assist ;)
I also have my third one on my VY,
They go all brittle, and start to weep, and then the hoses/fittings snap off,
after the second one I replaced,...
You are correct,
the 6203 2RS Bearing is a common Pulley Bearing on VX & VY's,
as I did a pulley change-over for someone recently,
and they was...
Unplug the Loom first. there a a plastic clip on the side of the plug,
carefull not to break it, as it could be brittle due to the...
I remembered today, I think there is a fine rubber seal that goes behind the door handle base,
So make sure you install those also, as there will...
You can Debate all by yourself !
Like I said Debate closed !
Nealeboy will run it for a few days, and see how it goes,
I will contact him again, or he can contact me again, then scan it again, and check the...
I think you need to take a step back, think about your poor attitude, and I think you owe Nealeboy an apology,
as you don't know...
If you can remove the barrel,
it then should fit in the replacement door handle.
The alternator issue wasn't ignored,
the poor guy didn't know where to start with all the alarms and events coming to screen,
As mentioned on his...
Dear JC Members,
Just for the record,
Nealeyboy come to my place today, and I checked the voltage,
It was correct at 14 volts idling, but when you...
Remove the Door Trim,
and carefully cut the black mastic seal, "NOT THE CLEAR PLASTIC" and peal it back,
and tape it back with duct tape or...
It you need the replacement Covers, go to the wreckers,
will be heaps cheaper.
Separate names with a comma.