It takes just a moment to join our fantastic community
Strange one this .
I replaced the fuse, circuit and relay. Just can't find the driver relay according to my wiring diagram .
That's the 4 pin power relay, I'm after the 5 pin driver .
Looking at my wiring diagram I see the power window relay and driver window relay, can anyone tell me where the driver window relay is ??
I never took the thing off removing mine.. some people do it the hard way. pcv and something else buddy if I can recall.
relay , fuse, there could be a break in the wiring lines somewhere... do a wiring test mate.
I wanna try this software so bad!!!!
Its been almost a year since Ive posted so I thought id help anyone out in the future with this.
Problem solved. I installed the new loom with...
I recently did a ecotec swap with a loom that came with the new rebuilt motor...... no dramas expect getting 2 wire 02 sensors to replace my...
So over 100ks and reducing speed to 80.... im getting the fault Right-Sensor-open. Left-sensor-missing. engine-light-on wont clear unless ignition...
Is it possible to just rewire a 4wire into 2wire sensor????
colour code and disregard the rest??
Installing a new loom so yeah. :boxing:
idle changes? possible check 02sensor/tps
could be a wiring connecton not the sensor its self.
I think that is a calibration problem....
Wheel spacers won't help?
Your buttons don't work on the key pad? You only have to have the ignition to "ON" that should cancel it out. Very Strange........... You really...
cheers brother fixed!! :D :D :D
There's a button near the hood latch/hook inserts in front of the radiator that will trigger it if the alarm was previously set. Placing your keys...
Thanks mate I'll adjust and test the wiring.
New TPS is in so I'm thinking I didn't adjust it correctly or the wiring is the answer.....
Should the throttle be open when tps is installed? im still getting the same issue on the tool and adld is reading 0.02volts with new tps.
Engine light comes on, idles at 1500rpm. DTC reads code 22. 416=reads5v. earth has resistance. 417blue = reads 0.03 volts on the...
cheers mate :)
Ive found a vy engine from 2002 :)
mine is 2004, i think ill have no dramas with it..
should be no need for bcm,ecu swapping? what about the...
shagged my motor, killed a piston in pieces...looks to be cheaper in my situation just to get another motor,seeing i have to shift a...
i get ya brother, thanks!
title says it all..
how do i install coil packs without numbers printed on the coil itself?
nothing like 5 dollar coils ............. :surprise:
My ignition barrel seems to not want to let go of my key when i want to pull it out lol, need a new one soon ? :lock:
yeah buddy exhausts there all different, everything i read about twin cats claming extensions for 02 sensors with extractors.. what a myth. not...
done & done, sounds wild!!
So I successfully got my passenger extractor to fit after removing leads, plugs, air intake. *for future reference* didn't need to remove the oil...
Clean your battery terminals to if they look like crap..... if your keen clean the throttle body, inspect the IAC. do what Futech said above!
okay my mirrors will go side to side.... not up or down?
replaced power window fuse/relay, drivers side window wont go down i can hear a click...
Sold!!!! And sent today :-)
yeah there's only 1 sensor, located under the thermo housing via the bleed screw.
power to go up hills? and lose traction over the other side of the hill, side ways crash!! seriously take your time with your build even if it...
bump. quick sale!!
Do what i did. take a soldering tourch to the temp sensor, get someone to watch the gauge and see what temp the fans kick in.
you cant do any...
thanks guys for answering my simple question if it was plug n play.
challenge accepted, time to do extensive research :)
How hard would it be to fit a climate control module to a vy exec series 2 with non climate control?
plug n play?
Separate names with a comma.