It takes just a moment to join our fantastic community
Has anyone here actually had a transmission oil change? If so did you notice any difference?
I have just hit 50k and was going to get one done at...
I have a LS3 wagon.
It was the full DPE set up. Extractors all the way through.
It's the 3 inch stepped to 2.5 inch.
I don't hear drone on mine...
Maybe my tune is a safe one.
It would take a lot of logging/tuning to dial in enough advance and different temps before it knocks, more time...
It would still get that hot, just cool down quicker with an OTR now I reckon.
Heat seems to kill power in these things, well it does in mine anyway.
WOT timing with cold intake is way more advanced than WOT with hot temps, and you can feel the difference in power between the two 100%....
Once the oil is up to temp, say 100 degrees and you stop, it will hang around that (-20%)for 30 mins then start dropping. BUT depends on how...
depends on the driving conditions and intake.
I log mine with and it has an OTR.
Freeway/urban cruising will see my intake temps maybe 5-6 degrees...
do yourself a favor mate.
Buy a $5 ELM Bluetooth connector.
Buy torque app (Android one is what I use)
Import GM PIDS for free.
The above will...
found the problem
Holden put my maf on backwards after service yesterday.....
fuk me dead
guess it was causing all the issues
all injectors at...
I'll get a multimeter on them tonight
I have development a rougher idle
o2 readout are not as consistent
stft always negative greater than 10%...
I'll join this club now
stft all over the joint
no esp on dash
but below screen shot from torque app says misfire
Can we get wb 02s to replace ours?
Re street racing.
All good, does not bother me
Everyone has done it at least once, anyone who denies that...
Its more of an interest/hobby sort of thing for me as opposed to getting too serious.
getting a WB would be for all the serious...
ltft is just the average.
my stft swing from - to + with 10% so happy with that.
I want to get into this tuning thing but don't know...
Good to see they came to the party.
Least you figured it out using your torque app too.
I use it on mine and my O2 voltages are consistent on...
What sort of timing advance are you guys with tuned L3's seeing.
Just curious as I monitor mine with my Torque app.
I'm seeing up to 40 degrees...
you sir have a great Australian made vehicle
I VN wagon has more street cred than any other holden built post 1989
no you cant.
Will sound good.
Mind you only heard when bolted to headers.
it's a re badged defilippo exhaust
they made the said system that tapers from 3 inch to 2.5 inch for walking shaw
Hindsight is a beautiful thing.
Re headers, don't reckon cats move so might be alright? Stepped would mean a changing diameter along the...
That's why I did it to my first wagon.
Mostly looks and so Holden did not get funny when went into servicing. Warranty issues I mean....
I had the first option on my series 1 wagon.
Have the second to last on my series 2 wagon. DPE system, but merges from 3 inch to 2.5 inch at the...
Jarp and Bbunnys.
Very similar results.
AFR's on Bbunnys looks a lot more consistent though. weird
yeah, dunno about SC.
HSV's maybe with all the upgraded running gear to handle the added power, but how long will the old stocko last with pretty...
Is that how they sound.
That’s bloody good
Thanks for sharing that
fuk it I'm doing it
I have the w375 already
fuel I don't care about.
been quoted $4500 to go from w375 to w407 here in Adelaide.
need new lifters...
you tube is the least of my issues
Im curious on this too.
Im finding myself looking at more and more you tube cammed LS's and the bug is starting to bite.
I would like the above...
fuken Moron dealers
this where is was getting my "info"
as per my comment above!
yeah that's stuff all
these new oils must have unbelievable sheer characteristics
blown hsv's I think still have the thinner stuff and are...
series 1 were not staggered so maybe that's where it's from
I'm due for new rubber soon and it's not much more to get some second hand redlines...
let me know how you go/suitable.
I used to run 10/60 in my unopened LS1 and it was the best I found for reduced noises.
10/60 in an LS3 though...
thanks for that.
Will the staged VF2 redline mags from sedans and utes fit the wagons?
had an "expert" tell me wagons wont accept the larger rears, but i'm...
im in the Adelaide Hills too. No way I get 69k out of mine. 40k if im lucky
I do not miss that cream velour material on the door cards/dash from my series 1 days
Bastard to keep clean!
Stomping from stand still with a tune in both E38 and T43 will see you get no where except in a cloud of smoke
I have a heavy ass wagon...
yes had it done on my series one VF.
Did it more for oil temp than other ones.
Non there only vacuum ones or utes with electric
Least I know where to get them now
Be effed if I can find them here in Adelaide
Separate names with a comma.