It takes just a moment to join our fantastic community
Yep, thems the goods.
The nuts are 13 mm square.
Not the average flat nut unfortunately..I ended up making my own out of 3mm stainless.
I found it impossible to buy...
I bought a scanner from Aldi for $50 about a year ago.
Works on my VZ 07 and also on a friends Mazda 2 built 2010.
It was on special at the time,...
There is more than one switch, so you may have been given the wrong one first time.
I would be looking at the switch in/on the column, but of course this may mean removing the air bag I believe.
I still very much doubt a brake issue, more likely suspension issue.
Watch the average street drag car on launch.
They will do the same due to torque.
Drivers rear will squat down while passenger front lifts up....
I remember either asking on here or at the GMH Dealer and was told a damper/dampner
May need scanning.
My 07 VZ wagon has the same.
I believe it is a sound/drone/vibration damper
Accellerate Auto Elect up here had a special for the past 6 months at $97 for memory.
Big RACQ Approved sign outside so they need to do things...
$200 or less up here.
If the mast and rope was replaced recently then it was not done correctly, or it is the wrong one.
I replaced mine about a month ago(write up on...
In Qld, any windscreen scratch in the drivers view is a fail.
I would think if the WA rego is cancelled, then the defect no longer applies, but the car would then have to pass NSW rego blue slip.
You cannot transfer WA rego to NSW.
You will have to first cancel the WA rego, probably best before you leave WA, unless you want to drive it in...
Statesman towing capacity from 1996 to 2010 is 2100kg.
VT weighs around 1630 kg so add trailer weight maybe 750kg and still not legal.
Towing capacity of the vy is not enough to tow the vt so not legal.
I usually just give the belt a quick spray with wd40 or similar.
What problem ?
Carrying on a toxic industry in a residential area,
or something to that respect.
Probably why all spray shops have spray booths.
FWIW Councils do not look kindly at back yard/front yard/home spray jobs.
In fact they get very angry and start talking large fines sometimes.
Lots of threads on vz starting problems, had problems myself.
Have a read...
Have to agree.
Not Holden but I had the same problem with a new Falcon 40,000 k's on it in 1980.
One really noisy lifter whenever it felt like...
Brisbanes Courier Mail had this writeup in the Cars Guide liftout yesterday.
This may help.
I would remove the door trim and have a look.
Are you referring to the three bolts on the door holding the door latch mechanism ??
if so, then they are holding the door latch mechanism.
Short story, friend has a Mazda 2010 model, which keeps throwing up a code, so he gets me to scan it and clear the code.
Next time he starts the...
Maybe use the key if you have one.
edit.. What I mean to say is use the key in the drivers door lock which may just activate the central locking.
Possibly with great care.
A pic of the problem pipe might get you some advice.
You could try one from the wreckers, or phone round the auto shops, Bursons, Autobarn, and maybe that mob who advertise on those cheating shell...
I have noticed this lots of times over the years with different cars.
When you pull up the fumes emitting from the exhaust continue on and past...
OK I know this post is 3 months without activity but yesterday I replaced my mast and rope.
Got it from my usual contact at Zupps Aspley for...
Ha Ha Ha ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha Ha
Screwdriver was never going to work.
Cold chisel was suggested.
May still work.
Heat is also a good idea, but don't melt the alloy.
Gees mate, where do you live ?
I can have that off in 10 seconds.
I have plumbers stillsons and foot prints so easy peasy, or as above, use a...
Welcome Double O.
Be aware of post dates as this one was from 2009.
Separate names with a comma.