It takes just a moment to join our fantastic community
If you don’t want to worry about loss of traction use Kimforest. The traction is not there to begin with.
What is the seller on eBay ? People are always worried about buying things on line and you already found a reliable one.
Have you measured the injectors resistance as sugested?
It might make you stop scratching your head and show what the issue is.
The documentary gave me a better understanding of the struggle some communities suffer here in Australia.
Although it might have been better if...
It would be helpful if you mention at least which engine your car has .
Here is s nice documentary to support what you mentioned
I downloaded the extra GM PID on Torque app.
The transmission related PIDs need the “OBD header to use” option changed from blank to 7e2 which is...
I started with the cheapest of the cheapest on eBay . It worked but not very reliable. I Ended up buying the OBDlink MX which is a bit pricier but...
[ATTACH] Get an OBDII Bluetooth dongle só you can monitor all the temperatures during the trip.
A fun way to figure out is to take to a drag strip get your 1/4 mile time
Go to a weight bridge and get the weight and with those two number you...
When I did mine I first tried the Bendix pads without the counter weights and there were no way of getting rid of the squeaking.
You have to replace the caliber bolts as they are no reusable as per service manual.
There is a thread somewhere with the part numbers required...
Do you have a wideband installed?
I would definitely have one installed with all those mods.
If the engine is running to lean , it could cause...
You could get the actual figures via OBDII
Below follows some stock VF II ls3 temperature baseline from cold
When the issue happened the first time , I would have swapped
cyl. 1 spark plug with cyl.2
cyl. 1 lead with cyl 3
Cyl 1 coil with cyl. 4...
It is a bit tricky when you do the first time. As far as I remember you have to pull the tab up before pressionado pulling. I don’t remember Very...
I think it works fine as a normal cruise control.
I use it a lot on the M1, specially at night.
Which app/software are you using
Have a look at the scan tool in this video.
It emulates the tech2 via software .
Measure the injectors resistance
It should be around 13 ohms
For sure they all stretch. Look at this example from my work. This storage unit has around 2.5 meters and has 12 shelves (not shown) ....
Thanks for clarifying
I think in order to keep the DOD
A custom grind cam is needed.
I just posted about that here...
I was about to ask if one could just replace the cam without doing the delete. But it is 46c outside and I don’t want to move at all. So after a...
There are some nice nitrous Controllers in the market.
You can make it behave as much a you want.
And it can be a daily 100% stock if you...
Wasn’t Monstar’s engine cammed without DOD delete ?
Are you thinking of engineering it ? Probably it isn’t even possible with turbos depending...
There are some videos of Stingers on dyno and looks like the have lower losses resulting in good number at the wheels.
But dynos are not the...
The annoying thing is that people start to get repetitive and every single thread the comment “just get a barra bla bla bla bla”
Ok that’s is a...
I was about to recommend the AEM with OBD2 as well .
You can connect it to the Torque App and have a poor’s man dash and logger...
I would advise to get a wideband air fuel ratio sensor.
It is the only way to know your fueling is well tuned while in open loop. It is also a...
If you can post some pictures of the readings . So we can have it as reference on the thread.
Bellow follows a nice video that covers the P0430 code troubleshoot steps just as reference. Note that the investment to be able to get the data...
That’s is true. I didn’t see that either.
That shows the importance of including as much in as possible on the post when looking for help.
My bad , i assumed it was an V8 .
Bank 2 is the passenger side in US
Do you have stock headers ?
It could be so many things.
You can check the injectors resistance to begin. Lots of information on the forum as @wagon37 mentioned.
Yes it is.
In addition to all the comments made about the V8, I would like to add:
-the amount of information and parts available for LS...
Usually you get answers quicker and you put some more information about your car . At least which engine it has.
The pictures I posted earlier are the PIDs for cylinder misfires ....
Separate names with a comma.