...Auto & Engine are stuffed did 430,000 kms on the clock and have engine & automatic transmission waiting to go in.
Is it possible to removeengine with automatic trans still attached?
I have engine crane to do the job, but haven't done with 3.8 litres from VN, only Subaru Liberty...
Ok so every time I’ve taken an V6 engine out I’ve run the chains through the extractors pipes. Front left and rear right.
My question is, is there a easier way to do this? Like a hook or loop that I can bolt onto the engine at the front and back to be able to rotate the engine to remove it...
How to remove ve alloytec engine,,,,, best way? No hoyst!!! Using engine lift?
Doing the job in my garage, anyone give tips? Especially wiring and top bolts on bell housing?
Engine is so far in firewall looks a bitch to get bolts out.
Leave gearbox attatched?
What is the easiest way to remove & replace my alloytec engine in my Vz , I have removed heaps of Commodore engines Vl Vr Vs VT Vx Vu , I only need to remove & replace the V6 Alloytec Engine , I have a 2 ton engine crane & stands good work shop , whats is the best way to do this just unbolt...
Need to remove oil pan from engine but need to remove to crossmember has anyone done this before that can tell me how (pics would help on where all bolts are) thanks
Hey Guys Just Wondering if someone can point me it the right direction i have a VQ Stato That i have to take the engine out of and was wondering if there is a HOW TO on this Site ? And Can someone please Post me the Link :thumbsup:
Hey Guys Just Wondering if someone can point me it the right direction i have a VQ Stato That i have to take the engine out of and was wondering if there is a HOW TO on this Site ? And Can someone please Post me the Link :thumbsup:
Im sure something similar has been asked before but here goes anyway.
I need to remove the rb30e from my vl because its dead at the moment and im replacing it with a 20e for now. disgusting i know. This is the first engine swap i will have done but i am planning to do more so im getting some...
I've been reading alot about respraying my car and i've heard about alot of people respraying their engine bays without taking out the engine (3.8L).
Has anyone done/seen this before?
what do you remove/leave in place?
I'm looking at a respray at the end of the year and dont really have...
I don't have access to my service manuals at the moment .. is it a simple operation to remove the plennum from the engine? I know the top of it just bolts on, and the throttle body can be unbolted easily.. But can you remove the plennum easily? Mines absolutely filthy, and would love to clean...
Hi all ,
My first attempt at removing an engine and box from any type of car .
I have a 2009 written off 6.0L WM Statesman that I want to pull the engine and gearbox out of and install into a 1969 International Harvester Scout 800 . Engineer says should be fine.
Just looking for any advice and...
Hi guys.
New here, so go easy on me.
I searched lots of sites and manuals for info on how to replace engine mounts on a VE V8 (SSV) and came up empty handed. I bought a Haynes manual and figured the other half out myself so thought I would share this info.
The drivers side seems to be...
I am going to remove the engine only [V6] where do bolt the lifting chane, and does anyone in the Sutherland Shire have a engine hoist that I could hire ????
Cheers Garry
2013 VE Commodore LWR Engine. Mechanic to remove/refit the head for burnt valve repair.
Hi, I've got a burnt valve on Cylinder 4. Anyone know of a mechanic who can remove/refit the head so I can get the burnt valve repaired. Head shop said it is $660 for the valve repair. Southside of Brisbane...
Recently have professional remove LPG system (tank, hose under car and LPG system in engine bay etc) for me then I remove the LPG computer and cut wire in engine bay where LPG wire used to be and I made a mistake that Engine light isn't come on anymore when LPG System removed.
So any idea...
Hi ppl, can anyone tell me how to remove a radiator fan while it is still in the engine bay. I have undone the 2 clips but I am not sure how to lossen bottom the part.
Is it held in by screws or clips.
What is the best way to remove silastic/ultra blue sealant from metal surfaces ? Will gasket stripper remove the silastic as well ? Some surfaces can be too soft to scrape and the silastic tend to fill pourous surfaces making it hard to get out. Thanks ;) Trying to clean up an old Vn engine.
hi all,
sorry this probablt sounds lame but what type of tool is used to remove the engine covers on a VT 5L , they look like stars? an alan key kinda fits?? any hlep as would like to remove to clean.
cheers
Hi,
I have found my balance shaft bearing is shot. Makes a bad rattle when revs dropping back to idle.
Will it give me any future problems if i just remove the gear?
I have heard it will idle rough but is that the only thing?
Wont blow up engine etc?
Added Video/audio
Thanks
Hi all...i have a vn calais 5 spd manaul 89 model...How hard is it to remove the engine, and put it back in....i have been told about 1 1/2 hours to remove and about 2 to put back together....any thoughts...I have to change some gaskets and will clean it up while its out....Any help appreciated
Did a compression test and blew coolant out number 6 spark plug hole. Checked intake gaskets (newish) and they were fine. Took right head off and gasket appeared okay though original. Head surface seems fine and unwarped. Maybe a crack? Anyway, sludge everywhere so pulling engine to clean out...
when removing the buick engine out of a vr, can u remove the engine and gearbox at the same time. or is it too big to fit out? radiator will be out 2 for extra room.
cheers fellas
Hi
I am just wondering if someone can tell me what’s the easiest and Simplest way
To remove and replace the engine mounts
on my 2006 Holden Commodore Omega
Is there any easy way to remove an engine bay loom? We need to remove one from a wrecked car, going into a VZ exec thats getting a LS2 conversion. The only way I can see is to cut the wires and resolder them all together. Any other way?
I found other low km engine v6 Buick VR and will go on my car by earlier next year so currently on my car run on dual fuel.
So my question is, Should I remove the LPG when change engine and would it better to run on petrol straight only?
Or should I just keep run on LPG and still use...
hi everyone, just wanted to know if anyone knows anyone who can remove the engine from my car and replace it with another? i live in brisbane on the southsideand i have a ve calais ly7.
thanks
mark
Anyway, my serpentine belt decided it would break a few months ago. When it did it shredded the sound deadening material on the underside of the bonnet to bits :(
So....I was hoping you guys could tell me if it's OK to remove it? I don't want to remove it and then find that the paint starts...
Hi,
Just a quick one,Is it possible to remove v6 engine out of a VT without taking the transmission out with it,as i only need to reco the engine.
Any help would be appreciated.
Cheers
Hello,
I have a really simple question. I own a 2008 Ve Hsv LS2 and it has only 64,000 km on it. I just my installed XForce 3 inch Cat-Back System.
I would like to remove my catalytic converters. I know it's illegal to do that, but the question is
Would my engine breathe better than...
hi everyone i have had some crud get in to my engine and i think that it is either blocking a port in the intake manifold, or keeping one of the valves open, what can i do to remove it ( preferably with out removing anything )
Replace VZ Sump - take engine out or remove bottom sub-frame
Ladies and Gents,
My wife had an accident last week and put a crack in our 2006 VZ 3.6 litre sump.
Does anyone know how to replace the sump. Gregorys say raise the engine and a local mechanic shop said it would talk 11.5 hours...
Hi all basically i have done a engine swap between a vt and vs before and thought the l67 would be the same... Apparantly not?
I did everything you would usually do and couldnt seem to find where the gearbox wire connects so then i consulted a workshop manual and the only way it listed to do...
Checking to make sure I can pull the engine and trans together if I remove the rad. Is there anything else that needs to come off the front that will prevent it coming out in one piece?
I need to remove the engine and transmission from the ole project car.
Can I remove these together as one big part? My initial plan was to drop the tranny from the bottom, wheel it out and then take out the engine using the crane.
But apparently it's much easier to remove them both...
Hi has anyone got any tips of the issues i may encounter putting a VT engine into a VS both auto... just wondering about the ECU I have a vt wreck here just wondering if i should remove the ecu incase the vs ecu has issues with the engine.. etc... 1st timer btw... :) Cheers Guys :surprise:
Just wondering how easy it is to remove the engine from my 2010 sv6 llt without taking the gearbox out with it as i really dont want to have to do that if it can be done any easy ways or just hard? Doesnt look to be much room to undo the top bellhousing bolts easy while still in the car.
Just wondering how easy it is to remove the engine from my 2010 sv6 llt without taking the gearbox out with it as i really dont want to have to do that if it can be done any easy ways or just hard? Doesnt look to be much room to undo the top bellhousing bolts easy while still in the car.