It takes just a moment to join our fantastic community
Anyone found a cone shaped spacer or such in the bottom of their struts (vn)? Mine had teleflo inserts with these on the bottom. Clarification?...
If everything checks out ok then you could look at a spal 16" fan and shroud. If that doesnt keep it cool then nothing will
I had a kmac and nolathane evolution tops. Both collapsed and seperated from the top plate.
Now running pedders oem rubber tops no dramas yet
If you just want a mild and very streetable setup and could get one cheap and didnt want to mess around with it alot to set it up then yes.
I had a 9.1 comp 355 with a starr manifold, 284 cam, blue top injectors. Made 220rwkw @ 6200rpm. Its not a bad mild cam with little comp and...
In my vn i didnt need to shorten the wires. Just had the factory relay/fuse panel under the glove box.
5 minutes? I dont think its a great spot imo. Taking the gaurd off on the side of the road would be a little red faced just to change a...
Yes its free from the website but you will need the serial port adapter to usb port to load your timing map to the ignition.
Just have a look for a 9 pin serial female port on the right hand side...like this
Not all 6al-2's has to be the programmable type with the serial pin connector on the side.
Hopefully running next month... Getting ancey
Is this the programmable 6al2? Daily driven car? If not, then lock the distributor timing out (asuming its the MSD Pro billet) then suss your...
Nice mate. What brand hose is this?
Last pic for a while
Haha so do i mate!
Tetra Schutz the inner gaurds
I welded up the holes etc and prepped most of the engine bay for paint gave up 3/4 way through as it was taking for ever with the little spare...
Finally got my pipes back
Bought all the fittings for the brakes today just waiting on some 200 series line.
Dropped in the radiator for shits and giggles.
Anyone know what the brake line thread is on a vt master cylinder?
I want to run banjo fittings for the front brakes.
I totally missed the high flow t/stat part in the multiple posts lol.
It was getting a bit hot wasnt it..I need sleep haha
I dont think theres a problem here. The cruise temps are ok and when its getting a beating its not over heating. Enjoy it.
Thats the rev limiter isnt it?
Engine bay done
500-523kms $45-$48 a tank in my 3cyl carb charade.
Grain waves are meant to be the bees knees as far as chips are concerned
You want to try and keep the coil wire as short as possible. Il have mine under the windscreen wiper cowl with an msd fire wall feed through. Have...
Wow thats pricey
####ing oath! Bin the injection, go carb and get all the bonuses of e85! Love the high revs of a skid pig! Nothing worse then somthing struggling...
The fuel tank should be vented via the emission canister (charcoal canister) in the engine bay. Theres usually a negative vacum in the canister...
B cast heads/vn heads? Manifold?
Crane 288 will make ya missus moist!!!
10.5 comp will be nice on 98.
Converter is a bit small but you will find...
Now on the ground and off to get the engine bay painted.
Haha. Yup lock it in eddy
Haha yea its pretty trick. You have to do a double take seeing a laptop plugged into a carb fed car lol
On such a heavily moderated forum im still wondering why this clown is still here???!!! Its a good laugh but c'mon
What he said
Get the MSD 6AL-2 programmable ignition and the pro-billet distributor. That will have to be the most flexible ignition...
They do make a sp manifold thats also not as good as others lol
Finally got the ss on the ground yay lol
Separate names with a comma.