It takes just a moment to join our fantastic community
Well why would anyone compare a 50k car to a 4k clunker thats pushing 20yo?
Lazy compared to a modified, blown V8 and one of the silliest 6 pots this country has produced.
Ofcourse a tuned blown fpv v8 and a typhoon are going to make a stock calais feel lazy.
Why no comparison of a zb to a gen f gts?
Stick your head under the dash and have a look at the unpainted metal covered in surface rust.
I drove my series 2a for about 2 years daily and never touched the brakes. Always stopped straight and would lock all 4 wheels up if you pushed...
It would have a limiter around the 6200-ish mark?
Fit a S2 pump and sender unit to match the S2 dash cluster means no programming required to make fuel gauge work.
Why did it need an auto elec to...
Love a good e-penis war.
Women are pushing the whole suv thing. It's more of a "keeping up with the jones's" kinda deal because the CX5/7's look cute and nice.
I have a...
Change fuel filter, put some fuel in and re test.
If it doesn't have a t/c button it doesn't have traction control.
Dont have to worry about modifying anything to turn off if it doesn't exist.
so did old mate fix his ticking engine or what?
So instead of it going moooo....moooo....mooo you want it to go momomomomomomomomomo
Just a side note. When you did the timing, did you put the car into diagnostic mode when setting the base timing?
Little end is my internet browser based guess.
Balance shaft might also be possible culprit???
Fit it and see where it ends up. Should give you a clue or two
Disconnect it. Drink a beer.
Camshaft sensor won't stop your car from starting.
Crank angle sensor will though.
Go and see what it runs at the track with some sticky tyres. Then you will have an idea of its performance.
Coles brand Orange soft drink. :/
Push all the way on, squeeze tabs and pull off?
They are probably the flat sticky weights that will be on the inside of your wheels' barrel.
Nah not rare and motor isn't that exciting in standard form.
Sorry to rain on your parade.
There were no factory manual L67's full stop.
Need a 245 or 235 30 20 tyre.
Get it done and post pics and proof of it being engineered and rego'd in NSW. I bet we will never hear from you again. Happy to be proved wrong...
Pro tip - Undo bottom shock bolts before you jack it up.
I have a set of compressors that have been cut down so the legs dont hit the body when...
Can be done. Will look like it just came back from the 70's though.
Pre vz shafts will fit fine.
So you want to put a v6 into a v8 car?
100% of nothing will be plug and play. K frame swap to begin with. Come to think of it that would be the...
They're swaybars and link pins?
The standard FE2 stuff should be as good if not better than the equivalent from Pedders. Springs especially.
I'll take the 2020 Corvette thanks.
Throw em in the bin. Handbrake shoes drag and cause bulk dust anyway
I'm running 15-40 diesel oil in the ecotec atm. Had a very noisy lifter when running on HPR10. No noise with RX Super.
Will drop it in another 5k...
15x6 steelies are everywhere. 15x7 are made of gold it would seem.
15x7 steel wheel for the utes.
Carbies are awesome if your into vintage cars.
If it tracks straight and drives fine i'd back the other one off until it matches the other side.
If it's copped a whack you'd expect both camber...
Whats wrong with it?
It's never going to be perfect being IRS.
Separate names with a comma.