It takes just a moment to join our fantastic community
i am in need to replace both qtr panels front bar and bonnet.
Can get a halfcut for $100 but its a VS.
will the panel,s still fit ??
car kinda has a bit of a flat spot.. seem to chug alittle bit when in that range of throttle.
Not allways though... what could be causing...
only started hearing it today, a load knocking noise in the front left wheel area when turning a left corner.
seems to mainly do it as im...
can anyone help at all ??
my car had a manual conversion, but they stupidly didnt put the manual loom/computer in.
ive purchased a loom/computer to suit, im just...
hako - so the oil light came on while i was driving because the fuel pump is more then likely buggered ? is the oil light coming on an indicator...
ok bit strange.
about an hour ago, car was low on petrol - just put new seats and carpet into it has been out of action for a week or so....
where can i buy the underlay that goes underneath the carpet ?
i do not want it cut to fit the carpet, im just after a few meters of it.
i had to rip up the sound deadening mat on the chassis of the car because the car flooded.
underneath the sound deadening mat was more...
my car flooded the other night,
ripped carpet up, all the underlay.. but there was even water under them sound deadening mats. There was more...
ive allready been airing it out for last 3 days
ive had a little heater in there on the 33 degree day, was like 70 degreess in the...
mmm part 2 is the one i need.
beware of flooded roads maldotcom2!
ok, car flooded up throu the hole where tranny is, the rubber boot wasnt in place when i went thru a flooded road.
ive ripped up the carpet,...
ive got a 1993 vr 5spd mauaal, still with the auto ecu in it.
is there anyone on here near frankston, in victoria, that can reprogram my ecu to...
the other night, i was on my way home. Was quite a nice drive watching all the lighting all over melbourne.
i was just near home, i was driving...
ive searched and couldnt find on how to remove the centre console.
i need to rip the carpet out, and im at the stage of just needing to get the...
ok, so my car kinda got quite flooded the other night, the whole carpet and underlay is soaked.
ive removed the seats and im about to pull the...
yep my engine light is on while i drive..
i checked the codes and it returned
24 31 35 42 45 49
and a heap of codes for an...
i dont really know me ****... so wheres the bell housing ?
further up the gearbox there 2 plugs, 1 is plugged in, the other isnt....
i picked up a vr 93mdl which had a 5spd conversion,
i am wondering does the memcal NEED to be re-programmed for the car to run ? or will the...
where are thease plugs exactly ??
how do i tell if i have an auto or manual wireing harness in my car ?
i got a 93mdl vr, had 5 spd manual conversion.
The speed-o isnt...
i cant find the manual conversion page.
been searching for 30 mins now, really shitting mee.. please post it if you know it.
how much work is behind putting in a manual ECU ? to fix the idle probs ??
allrite, i just rechecked and it came out with.
Code 24 - Vehicle Speed Sensor (VSS)
Code 31 - Theft Deterrent Signal missing
Code 35 -...
how do i clear the codes ?
someone said remove the 20A fuse near the battery, but there is no 20A fuse, there all 30A.
let me know thanks
my vr v6, was auto had manual conversion just shat out all thease codes.
82 and then 12......
how do i check what error codes im getting ?
im looking all over the forums buit i cant seem to find out how to check the codes ??...
i just picked up a 93 mdl vr sedan, $500. had a manual conversion about a year ago. in allrite nic..
the car will not sit at a constant...
got a 1993 vr 5 spd manual, the speed-o and odometer arent working.
do the dash clusters bugger up ? or would it be the mechanics...
i plan on spraying my vt tiga mica.
i was just wondering if anyone has painted their car before in this color??
what color undercoats do...
my mechanic i usually go to around the corner quoted me $1400-$1500 for a manual conversion
i have a written off vt s-pak 5spd manual.....
im having a bit of trouble connecting the hot/cold switch up. at the back of it its the one with the teeth and small sprocket thing....
yeh mate your practically spot on, i just had someone explain it all to me via PM..
ok, i want to get the power options from my vt s-pack swapped to my vt executive. the power mirrors, windows, seat etc..
i was told i might...
ok.. im half way through putting the dash back in, and ive just come to another problem of..
will the dash need to be out for the pedal box to...
anyone at all ??
will the FE2 shocks and springs out of my 98 s pack fit my 97 exec ?
also does anyone know exactly how much lower the FE2 suspention...
ive just got a few questions about installing the loom.
now i dont plan on doing it myself, but i have a 98 vt s pack with electric...
im just wondering if anyone would know a rough cost on getting 4 doors, rear bumper and sideskirts painted in tiga mica ?
Separate names with a comma.