It takes just a moment to join our fantastic community
couple of suggestions for diagnosing. Probably not the problem but good to look at. I found a faulty wire connection in the wiring loom near...
in my estimate a full rebuild set (gaskets rings bearings seals)basically the works would cosl around 4 to 600 bucks. The only reason that you...
Here's a long shot to try. with an empty tank get some rought sandpaper(say 120 grit wet and dry) and roughly sand the area around the hole. go...
if ur other bike has same spark plug type try swapping to test spark plug.
dont think you need a rebuild. Will try to keep an eye out tomorrow for more info. If you were in NSW icould look at it.
most probs are fuel related. did you refill just before problem started.
ref to sparkplug white tip is lean (fuel blockage) rusty tip is excellent burn black is flooded yellow is bad fuel
*could be either spark plu failing under pressure. *parcially blocked feul jets can cause the lag aswell. yet will rev fine when not under...
before 4000rpm is everything smooth in gears + power still there or is it lagging aswell
i think it has a little bend in it nothing major but. what does your vn/triton have to do with my exhaust mate??? not much.
Sorry, was talking bout youngguns ride. haven't seen yours.
throw in the hotdog for the cheapest opt. put it midway to get rid of drones and smooth out the bark. But make sure to install it the right way round.
here's a little thro in. cheapest op i reacon since we are talkin about 2nd year is Hot dog. Would give a bit of back pressure to help with low...
-------------------------------------------------------------------------------- My SV6 2004 makes what appears to be dry top end on start up ?...
best investment and protects for "up to" 80000ks +- is Nulon E30 engine additive. Teflon sticks to all components so doesn't run off overnight....
Separate names with a comma.
