It takes just a moment to join our fantastic community
Here’s a close up of the light. The lense is clear it’s just the black plastic in the back that makes them look tinted. They are actually brighter...
The brake lights have a silver reflector behind them. As VS 5.0 said the VE has the reflectors in the lower bumper diffuser.
When you put your foot on the brake it works fine.
Assuming you get hi flow cats with your new headers that will make a huge difference in the exhaust sound. If you do change your tail pipes,...
Yep sounds like thermo fans, mine does similar.
Straight plug n play. These have sequential indicators aswell
[ATTACH] [ATTACH] You should be ok with the new taillights. I have LED taillights that look dark tinted but it’s only black plastic under the...
youll need extractors,and upgrade the exhaust. You might go close with the stock exhaust and extractors plus otr
Yep definitely a bearing
Try loading up each wheel bearing by slowly swerving left to right to see if the noise changes. If it does then it’s a bearing. If not look...
I made my own with 12inch hotdogs. Sounds good, bugger all drone as is a manual. Autos will drone like hell especially when afm kicks in.
Easy to do, v8 or v6?
It says M/S system and yes factory position.i painted mine in black hi temp paint to stop corrosion.
Before you buy read reviews on what they’re like. Do your homework so you buy the best quality you can.
I’ve got a m/s Lukey 2.5 system with centre muffler, 2x9” hotdogs and rear 12” hotdog tail pipes. Deep idle sound,medium driving sound but loud...
I’ve seen them advertised for utes aswell.
Those mods should get you close to around 300 kw at the flywheel give or take.
[ATTACH] I just upgraded the whole taillights to led and sequential indicators
Just do it now for peace of mind
If your planning on supercharging go 3 inch.
After six years one would think he got it sorted.
Any silver would do I think.
Could be your cat converter, I had one that made a kind of rattle sound as the insides where loose.changed to hi flows and all good.
I’d probably go with the sports mufflers as the j pipes will be over the top loud. You don’t want the LAW any where near you.
It’s a grey/white foam backing
Autosvoice on ebay
2006 SS L98 118k,slight wobble in the harmonic balancer other than that not a problem in 10 years
18x8.5 rims on sssl springs,245/45 tyres[ATTACH] [ATTACH] [ATTACH]
Hey Mate, just did mine 2 weeks ago. It’s pretty easy but fiddly and time consuming and yes the brake light is attached but you can remove it as...
Finished the front passenger door, another 38 plastic welds drilled out and replaced with washers and screws and insert covered in suede. Very...
Yes I’ve got hotdog rear pipes on my SS. Minimal drone as 6speed manual, nice idle sound, quiet cruising and loud when accelerating.
Yes much louder, the “J” pipe reduces or cancels out the drone. I had a set of 3 inch “J”pipes on my 2 1/2 exhaust and was loud.
Try these j pipes. Reduces drone without the muffler or hotdogs.[ATTACH]
correct, you need to drill out all the plastic welds. I did this to recover the insert. Then I had to use screws to reattach the door card back...
Thanks, yours looks good.I was toying with the idea of doing the pillars as well. It won’t look to much?
I looked around at a few fabric places but just ended up using roof lining foam backed I had left over from the roof I did a few weeks ago so it...
just did mine in black suede, layed the seats down flat then bent it and out thru front passenger door carefully
so I drilled out the 6 spot plastic welds and 4 torx screws to remove the arm rest then drilled out 32 more welds to seperate the door card so as...
looks like I’ll have to grind away the plastic weld fasteners to remove the armrest then carefully replace the welds with screws and washers to...
Any ideas on how to remove the armrests. Looks like they’re plastic welded and if removed how to re install them securely. Cheers
Separate names with a comma.