It takes just a moment to join our fantastic community
To all VF evoke owners, I have noticed my VF evoke 2015 model doesn’t have a centre speaker??
Is this the same case for you VF evoke owners?...
Did you get the quad exhaust done? Cheers
Would it be possible to directly bolt a petrol VF SV6 twin exhaust outlet onto a VF LPG evoke with a single outlet?
If possible, all...
Arrow should be pointing towards the drivers side not passenger side wheel?
This is exactly the issue I am having I can see the worm gears move but not raising the seat, do I hit onto the worm gears and hope for...
With my Vy Calais on the drivers seat it will move forwards and backwards and it make the seat go down but won’t go up?
I can hear the...
Sorry guys, how do view the pics? Thanks
Could someone please inform me head bolts are 90nm and if you go 90degrees rotation 1/4 turn how much extra nm that would be? Thanks
It doesn’t come down to if I’m happy, I want to make sure I am okay to go ahead and continue bolting everything up?
Correct, only thing I’m concerned about is due to the extra torque I’m rh Boing rhe bilts won’t have much movement causing the head gasket or...
Is it possible to loosen the bolts to specified specs or should I just leave it as is? Thanks
This is the correct process:
Stage 1: Torque in order to 34 Nm (That's what is in the gregory's manual)
Stage 2: Set Torque wrench to 90 Nm...
The bolts had no thread sealant on them.
I think it should be safe rather tighter bolts than loose, I have put Loctite thread sealant 567 on the bolts which are water and oil resistant....
I have actually tighten the head bolts to nearly 108nm as I was looking at foot pumps instead of nm, would that still be okay?
Could someone please confirm with me the final stage of the head torque bolts will be 90nm torque? Thanks
Your right, in saying that this is a Vy l67 with stock boost
He said they come on the bolts itself, aftermarket bolts don’t have theeadlocker on it therefore Loctite is applied.
All recommended Loctite 242 on head bolts but I think I will go with Loctite 456 for head bolts as it’s water resistant too?
Thanks guys, when I got the head back from the machinist the rockers were just slapped in a bag, to my advantage is they are stock rockers and...
Also have a question regarding the rocker bolts, can they be reused as Holden have told me they can be reused?
I also have the stock rockers and...
Aren’t they interchangeable?
Sorry rocker bolts are the small bolts on top of the roller rockers?
Ok, Loctite 567 on head bolts, can someone please explain to me if the heads have to go on a particular side? I have my left and right heads mixed...
Definitely will get back to you regarding error codes.
On another note, when putting the stock rockers back in so I have to buy new rocker...
Anyone knows about a varex system that can be purchased in a l67?
Thanks for the reply, I ended up going with all head services in Hallam and they were great.
Heads were good no cracks and wasn’t...
Quick question, I have l67 heads but am unsure which is the right side head and left side head? Does it matter which head goes where?
Has anyone ported the blower with anymore gains or boost?
In the process of replacing my LIM and head gaskets.
Have bought aluminium gaskets to replace the factory plastic gaskets.
My question is...
Another qik question... Will an e2 bonnet bolt directly onto an e1 series?
Lovely 6.2 mate!
How wud you compare it to your fg turbo? Wud you say the fg is quicker or thels3 from factory?
Cheers for the info.
I have a HSV VE 3 inch exhaust with 100 cpi cats and 1 78 headers. its stainless steel with HM brand. it was a bit loud for me so l put...
Separate names with a comma.