It takes just a moment to join our fantastic community
can run stock hoses. Injectors are a wise upgrade though.
I just sold my ute, but ended up doing 70,000km's on Eflex and United E85.
buys 6L v8
worries about fuel economy :|
rwkw don't mean much anymore with tuners strapping cars loose as all **** and sticking inlet temp probes in the oven to fudge figures.
have 2.5 inch
sounds and looks fantastic
fits like ****, have a bucketload of washers on the hangers to align it properly.
clear some PM's lol
nothing, the offset is so high you could throw the thing on airbags and dump it till the chassis hit the ground.
you will be fine. Get a wheel...
I got the brembo 4 pots and 355mm disc for $800 through Thompson Holden. Best mod I've done to be honest.
With some QFM pads I nearly headbutt...
yeah was just stating if he already bought them or something. The freight would cost more than the rims lol
corvette PCD is 120.65 remember, it will physically fit, but it puts strain on the lugs.
it's about mechanical question as asking what tonight's lotto results would be.... it's simply impossible.
Now if OP stated, "I put diesel in my...
yep, this forum used to be about making your car go faster, stop better and handle.
Now it's about plastidipping and "my check engine light came...
head to your local tuner, they should have a boatload of them hanging around they would let go for a pineapple.
and yes, a LS2 cam slots right...
I have the ADV.1 5.1's, but meant for BMW offsets.
You are half correct, the thing is, the FlowForged 1pc wheels from ADV.1 are actually made by...
include something about spoke design, you can have the lowest ET in the world and still foul a big brake kit. Concavity, spoke protrusion.
BBS FI - BBS Rad: FI - Forged Line
Looking at about 11k landed.
Cheaper option is BBS CI-R BBS Rad: CI-R - Performance Line
dem bbs badges tho
####, finally someone with taste in rims! Very nice.
I have a set of 18 x 9.5 +22 TE37 SL from Yahoo Japan Delivered for $2100. Just don't fit over my brakes lol.
did it the old fashioned way too, no issues, brakes far exceed my expectations.
Looks good, but as a wheel enthusiast, BBS LM reps make me a sad panda. Something about the fake bolts that shits me.
My 65 year old next door neighbours VE SS dropped a lifter, I'm certain the car has never been over 2500rpm in it's life, serviced by Holden etc...
brb saving 1L/100km, brb buying a veyron, brb lifters failed and scored cam
even if it's manual if it's a L77 the AFM rubbish is still there unfortunately.
More to do with how low it was rather than the coil overs themselves, just becomes totally impractical, have to stop traffic in both directions to...
Pedders sponsored the car when I worked for Motor Magazine, I really should pull them out. They haven't blown on me yet, just the ride and...
I didn't do a thing besides rolling rear guards and grinding down the bumper tabs, didn't even relocate them.
setup in that photo is with 5mm...
S2 is also 66.9mm centre bore
wheels on red car are work VSXX brombacher, 19x9.5 +30 all round from top of my head, I was going to buy them from...
Series 2's front guards are actually rolled to perfection from the factory, saved me some coin.
I get what you are saying ducker, just the whole...
the word "stance" shits me too, call it aggressive offset.
This is stance :)
Theres "stance" and then there is undrivable shitheap.
my findings, don't go any more than 2 degrees neg camber.
9.5 with a 245 is fine, 235...
you have a 6L v8, fuel consumption shouldn't be in your dictionary :)
I wouldn't recommend justcar to hitler they are that ****
I remember the good old days when it was 97c/L
I use it for the $$$ benefit.
Only 11rwkw 20nm in it on my Bolt on only ute, specifically tuned for the fuel.
saving 30-40 bucks a tank...
spacers are standard fare on Porsches wide ass models
you can option it from factory for the regular 911's
everyone want the swag yolo hellaflush illest stancenation fitment but no one wanna get the angle grinder out.
I have pedders, wouldn't reccomend them but was through sponsorship.
TEIN are ok, slightly oversprung for shitty roads.
for outright performance...
you can make the torque figure on a dyno anything you want if you put it in a lower gear.
I wish I could put 17's on lol.
Separate names with a comma.