It takes just a moment to join our fantastic community
Adding a cam will make the exhaust louder, maybe weigh up your options before removing any mufflers to make it louder or atleast have the muffler...
Never seen decent brand name slotted rotors warp, but yes can't stand when people coast the brakes
I use stock calipers with slotted rotors and HPX pads in my VZ, Does 12sec 1/4 mile and pulls up fine.
I wouldn't bother with the change, to me its not worth it.
For more low down torque I would be taking it to a decent engine shop/builder and...
your kidding right? The long duration of the exhaust on aftermarket cams in these LS engine is more common than you think, The volume of the...
Driverside Vac line from rocker cover to a Cable throttlebody or for DBW vehicles sit in the intake between air filter and throttle,
LS1's come with 2 types of heads early 853's and 241's, I'd go for the 1.0mm or a touch smaller with original NGK style copper core
nope not once = Never
save your money as those cams are so close in specs you wouldn't feel the difference - do the diff and relook into this:...
bob jane used a screw driver to get the weights off one of my wheels, didn't notice until 3 weeks later, they seem to have no recolection of doing...
Did the melling pump come with a choice of 2 springs - some aftermarket pumps come with a choice, maybe its running the high pressure spring
Hey Tiesty, Does your glovebox kinda sag to 1 side a little, just trying to figure if all VZ's/calais have this issue
is it using oil?
Does it smoke on accel or decel?
Checked your plugs lately - how do they look?
it could be worth taking off your throttle and...
Do you now what colour the smoke is?
PCV valve is CLOSED at WOT
i would be getting that tunes AFR's checked for piece if mind
1 3/4 with 3in outlet
plenty of different brands of cats depends if the EPA/PO-PO may pull you over which you legally should run 400cell, I run...
Has your VZ got the 3 window dash, you can reset the L/per 100 so you can actually get the right fuel consumption figures for hwy and city driving
nah i wouldn't think there'd be much benefit in increasing pressure
what other mods does the engine have?
Stock N/A 3L Jatco AUTO
But u may already have figured that by now
Why does this need 2 threads?
To the top
Yea manifold sucks in stock form but so many factors with dyno's, what does the car feel like on the road??
Injectors way too big imo. but thats...
ITEM: CNC Ported LS2 DBW Throttle Body
LOCATION: Brisbane QLD
DELIVERY/PICK UP INFORMATION: If you pay I...
wont be able to register the vehcle with an older motor
Send it back to the tuner they should be able to work the lump out, pushing on the brake may be a little harder to tune out, but most will get it...
1. Most likely have more power and economy, yes it will wear out your accelerator pedal :driving:
2. no it won't as long as the tune is done...
With a old holden motor you can't steer past Shane Alex Engines @ North Brisbane
or Horsepower Engineering @ mansfield
How did you go with this?
Define decent rpm range?
probably better to ask garrett/engine builder unless you know how to read compressor maps
Very nice mate!
Whats next on the list?
How old is your battery, they do some fu**ed up things sometimes. also check IAC and TPS
Mantic, Mcloed or LS7
Bit of info and measurements here: Electric Fan Size
nice, heads look nice and clean - anywork done on them?
how is the preload on those rockers?
I would have thought the pushrods maybe too small! usually the base circle of an aftermarket cam is smaller...
pretty sure they won't
Clean throttle, maf and IAC maybe also o2's need replacing
Separate names with a comma.