Search results

Thanks guys. Starting to sound like a bit of a pain.

I have recently picked up a factory bull bar and front bumper bar from a VEI, which I would like to fit to my VEII. In order to keep my original front bumper as a spare, and not have to cut holes in it for the bull bar, I would like to use the earlier VEI bar, which already has holes in it...

I had to get my new flip key programed at Holden. They had to redo my existing keys at the same time. I spent a month or so trying to get it sorted out with locksmiths etc, but for the VE I couldn't find anyone who could do the programing.

Good job. I achieved a similar light spread by mounting a couple of small 55W "fog" lights on the front bumper, facing outwards at about 45 degrees. The fog lights give a nice wide flat beam, rather than the narrow beam of driving lights. I have them wired to come on with high beam. I am...

My son has just been screwed by NRMA. Would not pay the real value of his modified car when one of their customers ran into him. Offered $2000 for a $8000 (minimum) car.

I paid about $150 for the flip key and the electronic bit. I have access to a tech 2. Is there much involved in the programing?

Hi, I'm having trouble getting my VE to accept a new key. I went through (what I believe is the correct) procedure of inserting the original key, turning ignition on, removing original key and inserting new key and turning ignition on. The new key will now physically turn the vehicle on...

Any ideas where to get a disc manual from? I have only been able to find a random compilation of American based stuff. This is better than nothing, but not comprehensive and a bit hard to find things in. Has anyone been able to get their hands on the info on the GMH system?? Doug

Are there any other manuals available? I have been looking for a while and couldn't find anything much. It seems that Holden will only supply info on line to their dealers. Doug

See section 4.2.4 at http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/pdf/NCOP11_Section_LS_Tyres_Suspension_Steering_V2_1Jan_2011%20v3.pdf Short answer is you can increase diameter by up to 15 mm over the largest original equipment wheel.

I think they may be held on with adhesive.

There are several possible bases for importing your car: You need 12 months residency for a 'personal import'. If it is fitted with an Australian Compliance Plate you can bring it in as a 'returning vehicle' You can also bring it in as a 'pre '89' vehicle provided it is not too...