Search results

Nevermind I think I get it now, lol Bridging 2 channels of the amp, halves the ohm's that are presented to those channels, (decreasing resistance and increasing power) so with this amp being stable at 2 ohms I should be looking for a 4 ohm sub? hope thats right lol

Thx Tasmaniak, whats the deal with bridging the amp - (2-ohm stable in bridged mode) Does that mean I should be looking for a 2 ohm sub, or does it not matter whether its 2 or 4 ohm?

Ok, thx Tasmaniak, Well I guess its time to hunt up a sub to match :-) I listen to a bit of everything but mostly rock I was thinking 10 or 12 inch, will make the box myself, will prob go for a sealed box with a single sub I need to match the amp I already have: Rockford Fosgate T600-4...

+1 to this comment, very frustrating to have your H/U not hold memory after your sure youve hooked it up right :hmmm:

Id seen a few vids and pics with the crossover in the door, in hindsight probs not the best spot for it. I guess because there seemed to be plenty of room above the speaker behind the door trim, and wasnt 100% sure where else was a better spot, lol. The tweeters I mounted in the factory...

Hiya Panseven, lots of helpfull hints so far and looks like you got it sussed, I just did mine last weekend. The way i went was (as several other guys suggested) to remove the rubber from each end so you can get the tube straight and bunch it up. The only difference was that I used a pen with...

Thanks Tasmaniak, After reading your last post I changed the wiring plans a bit I went with speakers wires under passenger side sill RCA's down drivers side sill, under rear drivers seat carpet then under the very rear of centre console, Then ran the power & remote wires under passengers...

HAHA cheers Tasmaniak yeah I did silicone one in, just took me forever to do the last post

Wow that actually worked lol. First time Ive used sound deadening, hopefully Ive done it right I have 9 sheets of Dynamat so ive done close to 100% of the inside of the outer door skin and the inside of the door [/URL][/IMG] [/URL][/IMG] [/URL][/IMG] [/URL][/IMG] [/URL][/IMG]...

Thanks to all the guys on Just Commodores that post how to's, answer questions etc Installing my first stereo in over 20 years, and its quite daunting. Ive spent a day and a half so far, and its still not all hooked up yet haha Gonna try to post some progress pics. ( which I havent tried...

Cheers guys, thanks for the helpful info. yep will post on how it all goes. You also helped nudge me towards upgrading the rears as well. Any suggestions on what which coaxials would best suit the rest of the gear I have? H/U - Kenwood DPX-U6120 Double DIN Receiver Amp - Rockford...

Thanks again mate, Amp, Speakers, Wiring kit and Dynamat will hopefully arrive by the weekend, and amping all 4 speakers is the way I will go. I'm thinking I might as well save up some extra cash and get some decent coaxials for the rear doors. I will be running new wire to the splits in the...

Thanks Tasmaniak, lol you must have posted while i was typing a reply to ephect. That does sound like a great option, I didnt list that as one of my choices, as I was unsure whether it was worth amping the stock rears. But if that will be an improvement it would be silly to have 2 spare...

Thanks for the response ephect thats sounds like the best way to go. the switch when set to the 2 position (i believe ) is to allow you to run one set of rca's into the amps front channel, but still use it as a 4 channel amp. ie going from a H/U that only has 1 set of outputs I just wasnt...

Hi guys, I'm upgrading my stock front speakers and putting an amp in my VY Wagon. I am not upgrading the stock rears, and I dont intend on running a sub atm, but could be tempted to at a later date ( I use the cargo area for work) I have my amp - Rockford Fosgate T600-4 Channel Amplifier...

Hiya Cheeky Which model polk's? and how pricey exactly? :-) Was looking online at some JBL MS-62C 6.5" splits 80W RMS( have read good reviews on these) $295 With a Response Precision 2 x 150W RMS Class AB Amplifier $150 connected with Aerpro MX208 8-Gauge 2 channel 600W (2 x 130W RMS)...

Hi Guys, looking for some help choosing an Amp and door speakers for my VY Wagon. I live on Kangaroo Island, South Australia, and cant follow the Golden Rule - "Let your ears do the buying!" We dont have any Car Audio shops here. :eek: A day trip to Adelaide will cost $250+ (which I would...