Search results

or i could open a can of wupass on those birds *cough* flamethrower *cough*

this aint just light droppings mate i mean bloody hail of crap, and leaves and berries and crap too. I wear a suit and tie setup to work and taking the car cover off with prob mess that up and prob put **** in the car too.

Where i work, the only parks that are availble that are all day are under these scabby trees that are home to a varity of bird life. The only spots without the trees are 2 hour spots and well sometimes i just have to take the risk and park in the 2 hour. Parking tickets here are 30 bucks, was...

ok this is what my mate said to me just then "needs new compressor..new gas..new oil..and some little pin hole thing near the condensor" not sure what he means by pin hole thing

my mates VP has that problem although it doesnt seem to overly drain engine power. The air con place said to just get a new compresser as the barings are stuffed

Roof lining sag dash sticking, and broken cog in odo(fixed) Rear center locking actuators 1 reverse light not working no heater water in boot windscreen washer

I found i ton of these buick intake manifolds on USA ebay and was wondering if anyone had any ideas of fitting one http://cgi.ebay.com/ebaymotors/1995-95-BUICK-PARK-AVENUE-3800-Upper-Intake-Manifold_W0QQcmdZViewItemQQcategoryZ36474QQitemZ8010090621QQrdZ1

I been told that changing these rubbers is a good thing to do but whilst asking my local suspension joint they asked me if i really needed them or not since the rear ones are a pain in the ass the replace. What sort of things will i notice in the driving in the car if they are in need of...

Recently whislt using the climate control i noticed a strange behaviour in the air conditioning vents. They seem to stay shut for a long period and for no reason they open up any act normally for a while then close again. Bumps, acceleration and braking can set it off most of the time. I was...

Well my girlfriend tell me to get my ass in the kitchen and make her some piiie!

i think the 17 to 25 group should be devided up a bit more

Ahhh Cooties!

Maybe i should ripp of the STATEMAN badges and put them on a Excel

Well i got HOLDEN across my windscreen, but i sorta buggered it up. Its a little of center and the L sorta was in the wrong spot And btw when did this turn into a VN vs VS debate, i thought it was about ricers. Ricers remind me of Pauline Hanson, learn our culture or bugger off. Lancers...

How about you break into someone elses commy and rip theirs out and see what happens:p

Even if you chopped it back, you whould be constantly pulled over for it. way to much inconvienence, especialy if your late for work.

When people say that the VP is slightly gruntyer then the VN does that include the series 2? to me it looks like there in almost no difference between the series 2 and the VP motors. Id like to clear this up because my annoying mate reakons that the VP would be slightly faster over any stock VN...

Do the V8 have the fan on 24/7? The staty looks like the fan is connected to the drive belt

The VN 88 to 90 was 127kw (according to holden) The VN 91 to VR was 130Kw

$300 with tip

I think they are terrible fuel gauges( i hate sayign anything bad about holdens). I see so many people smashing the S$#T out of there dash because the needle is playing up

You should read up on this subject, cars like the mini cooper s etc they are trying (or have) to ban from p platers becuase they are somewhat performace cars, but a car like a SV6 or a BMW M3 is fine, its mind boggling

I just got my catback exhaust today sounds great. Its a 2 1/2 Inch with Mangaflow( i think thats the name) with streight thou mendral bent with a Standard round chrome tip ( even thou i asked serval times for oval) What im asking is that i get the sound of the exhaust at low and mid range i...

Just minor things that chould jack up the price ie struct barings and that carpety stuff

id like to know what would happen if you modifyed, ie pacmaker extractors after you put the chip it, and i be remapped?

It seems that being a series 1 is a important factor, what are we looking at if it was a series 2 then?

VN Series 2, K & N, VS S/C CAI and 2 1/2 Inch Catback with no resisnator coming this week

can i do the same thing to the side mirrors? i donno if you gotta do something extra because they seem like different type of plastic

Dont go V8 CAI get the Vs superchaged one, its abit bigger because the V8 one has less room to work with.

Lets face it, the VN executive bumpers look like S@#%! Ive been told that they can be treated and painted, ive just got a simple Alpine(or is it alasken) white. Can anyone tell me whats involved in spraying, ive got a aircompresser with the paint can attachent. Im also wanting to respray mirrors...

i don't have much to say really but any replies would be good thanks Thanks Guys

I about to receive a Lvl 3 dash out of a calais and i have a feeling that the odo wont have the same k's i do, the sellers says that the amount of k's is unknown, is it possible to adjust the odometer, i promise i wont wind it back to much.

Close! well actually its from this

Eh im not a big fan of the VX kit on VNs, i just dont like the whole modern model adaptions. But if you loooove adaptions, you certainly love this one! And 10 points if you can guess were its from.

Makes your car "fly".

Yeah i had some prob with me mums 1990 VN and we just took the cog to the blokes that fix it and we got a earfull! They said to us that us taking the dash cluster was illegal and wouldnt just replace the cog and send us on our way, the wanker wanted $75 bucks to have it fixed!

ill probably need something like this too, it says somewhere that you need lowered shocks to trap the springs or something http://cgi.ebay.com.au/HOLDEN-COMMODORE-SEDAN-REAR-GAS-SHOCK-ABSORBERS_W0QQitemZ4611070176QQcategoryZ102360QQrdZ1QQcmdZViewItem

Is king spring lows anything like the height of FE2?

i found these on ebay for $19, (starting bid) and they have the front ones for about $21. I think thats a good deal, ill probably bid on them but im screw if i only win one of them http://cgi.ebay.com.au/Commodore-rear-springs-Kings-Low-NEW_W0QQitemZ4609706264QQcategoryZ55436QQrdZ1QQcmdZViewItem

Anyone got any prices and specific parts, i was looking at pedders site but they aint got any prices and im not sure which ones i need http://catalogue.pedders.com.au/parts.php?make=HOLDEN%20COMMODORE&model=1827