Search results

ok thanks for that

how do i go about doing an ECU reset?

ok thanks for that

I have a vs series II ute and sometimes (at start up) it idles it idles at 1500rpm. And when im driving it idles at 1500rpm (and sometimes nilly 2000rpm) when i put in it netrul (its a manual) but when i stop moving it goes back to normal idle. im not sure if its only when its cold? I was just...

when you lower your car you should also get shorter bump stops, or just cut the stock ones. I lowered my vs ute on super lows front and rear and the back bump stops have to be 60mm i think. New shorter bump stops don't cost that much and you might as well do a propper job if you are getting new...

ok thanks for the help guys

yea ok thanks for that

i have a vs series II ute and i changed the instrument cluster from a level 1 to level 2. now the speedo is starting to lag a bit. I mean like when i take off it doesn't move for a bit, then when i get to about 40 to 60kms it kicks and and starts working again. I had the same problem with the...

also the handbrake in my ute is on the ride side beside the door. It wont matter if i put a glove box in will it. it will just be an empty space wont it? Thanks

yea i was just going to get one out of a wreck. and yea i looked at a mates ute and the heater controls and stuff were side ways instead of up and down. Do you rekon it i do if thats the case? Thanks

Im going to pull out the bench seat in my vs series II ute and put a single passenger seat in, can i put a glove box from another a vr vs ute into it, its a manual by the way.

ok thanks for that mate, much appreciated

i found a solid axle off a 5L v8 vr ute at the wreckers and was wondering if it would fit on my VS series 2 ute v6. I have posted a thread about this before but I wasn't sure if the VR's and VS's axles are interchangeable? Thanks

i have a vs ute and i got a 2.5inch cat back off the internet from Tuffcarparts.com for $180 it sounds pretty good, it would be a good exhaust to get if you were trying to keep it on the cheap. Im not to sure if they have duel systems if thats what your looking for.

ok thanks for the help mate much appreciated.

yea i was thinking about doing that because getting one from the wreckers could already be rooted. I am also looking for reco ones but they are pretty spenno. thanks for the help mate much appreciated

I have a vs series 2 ute with an open diff. I was wondering if you could put the whole axle off a v8 vs ute with an LSD into a v6 ute?

i was going to pull out the middle and passenger seat in my vs ute, i was wondering if you could put a single passenger seat in without the middle seat. I think i would just get a seat form the wreckers or something, could this be done?

ok, thanks for that. I only want to lower it so the tyres are just on the guards so i should have no worries. How much did the springs cost and did you get new shocks as well, or just the springs?

I have 18x8 inch rims with 235/40r18 tyres and i was wondering how much can i lower my vs ute by without the need for rolling the guards?

i am thinking of lowering my vs series II ute, Whats a good shock and spring set up and how much do you rekon it would cost? its got IRS.

I have a 1998 vs series 2 ute, i pulled a few cords out of my amp by accident, i hooked them all up the right way (I assume because all the speakers are working again) but now there is a buzzing noise that comes out of the speakers when ever they are on and the car is running, it buzzes to the...

Hey man what's up, I was wondering what you did to make the VE rims fit your vs? I got a vs series 2 ute and i got a set on VE SV6 rims for it and I'm not sure if I should bore the centres of the hubs out. How did you get them on?

ok sweet thanks for the advice

Thanks for the heads up, i just checked then haha

its a level 2 dash that i have ordered

Ive got a 1997 Vs series II ute with a instrument cluster with only a Speedo and no tacho, I have ordered a cluster off ebay for a vs with a tacho, i want to know if there will be a lot of messing around with it to make it fit, i know i will have to wire up the tacho from new because the old one...

I have a 1997 Vs series ii ute with no LSD in it. Whats a good LSD I could put in it, would a LSD from a later model commy fit in becuase of sick of one peggin it. Thanks

Clayton Milburn submitted a new Showcase Item: 1997 Holden Vs ute - s2 Read more about this showcase item here...