Search results

Have pin one to VL I'm working on. The pins or mount holes are all worn and slopping around. I might get some VN wiper assy's (hook type) and see if they fit the wiper motors.

Ok just to finish this up...I removed the fuel tank took it (and in-tank fuel return hose I got from Bursons, $25) to Brown Davis (Melbourne), cost was $150 to cut open, fit hose and re-weld. Brown Davis do a lot of custom 4wheel drive, racing and custom tanks. So pretty much the best place to...

Urrggh sorry to bring up old thread but need assistance timing TDC. Took head of VL RB30 had head done; machined cleaned; studs etc Put on new tensioner; water pump; and belt. Lined up bottom crank cog with mark(s) and TDC with cam mark (ensure both #1 valves closed) new belt on using correct...

Digging up old thread.....helping young friend with VL (6cly) fuel issues. Had to remove and drain tank as some idiots put water and whatever in it. Noticed swirl pot fuel return hose not connected in tank. I note I need a special submersible fuel hose (for this) but is there any easy way...