Search results

Hey guys, My parking brake light on the cluster has randomly stopped working. It will light up on start for a few seconds than turn off and when you go into engineering mode and do a full cluster test it will work then. I've unplugged the wire from the switch and tried grounding just the wire...

Hey guys, waiting for extractors and high flow cats to come. Did you have any issue with the extractors coming in contact or close to the transmission lines? I've been told on the auto LS3 they may have to be relocated

After looking around more I realised that! Other than coilovers what brand gas strut would be best to go for?

Hey guys, I have 3 out of 4 MRC shocks leaking and am upgrading in a sense. I'm going for a set of ultima ultima gt gas struts all round and I'm wondering if I need to get springs to suit or can I use the original ones that are off the MRC?

Engine was still quite warm so will check the plugs tommoro morning. I did have a look at the leads and a couple have heat damage on the rubber boot and noticed some had started to tear and break off on the plug end. I tested resistance at 20k ohms and most were reading 0.27-0.29 but the torn...

Beauty, that makes me feel a little bit better. Thought i had an underlying issue waiting to pop up. I do notice at idle it has a little stumble you can hear and feel but nothing that will stall the engine, also no miss while under load. I have also noticed that if i brake and coast into a...

Any signs on why I have multiple misfires? Also are my short and long fuel trims off? I've been told you add the short and long terms together to give you a result both banks are up near -10%?

So with what my O2 sensors are showing is correct and nothing to worry about on oxy side

So in saying that, these graphs should be fine?

Hey guys, I was wondering if anybody would be able to help me understand some information i logged tonight. This log was taken over 50 minutes, 50/50 town driving around 30-50km and highway run 100km. HSV E2 Senator 6.2l ls3 317kw 6sp Auto. I recently bought a bluedriver obd2 tool which had...

Hey guys, I have a 09 hsv e2 senny sig 6.2l and was looking under the rear seat at the wiring and i've noticed on the left hand side (Battery side) the wiring loom is exposed and in one it is melted and burnt. Would anyone know what this loom is for/controlling? Ive had 2 fuel pump failures in...

Hey guys, I have a 09 hsv e2 senny sig 6.2l and was looking under the rear seat at the wiring and i've noticed on the left hand side (Battery side) the wiring loom is exposed and in one it is melted and burnt. Would anyone know what this loom is for/controlling? Ive had 2 fuel pump failures in...

Suggesting maybe a custom loom to handle a bit more spark coming through?

They'd have to know if they're telling everyone doing a pump to also do that part of the loom aswel

Definitely let us know how you go when you find out

Hey mate, when The second pump went I had my mechanic go over relays fuses and the loom and it all checked out, no burnt plugs which is making me think maybe genuine hsv pumps are dodge in some way. my thoughts were the pump possibly can't handle the load and is always working hard all the time...

Hello everyone, I know there are several threads on this but wanting to see if they're any updates or findings on it. I have bought a 2009 E2 senator signature September of 2017. A week after buying I had symptoms of a failing fuel pump; would start but idle rough and a die, cranking but no...

ive just wired up my motor on the vc, has a blue 202 with tirmatic. everything is plugged in except one pink/tan wire that comes from the loom into the engine bay and is in the same plastic as the anti dieseling solenoid but i don't know where it actually connects up to. i know it is power for...

ive just wired up my motor on the vc, has a blue 202 with tirmatic. everything is plugged in except one pink/tan wire that comes from the loom into the engine bay and is in the same plastic as the anti dieseling solenoid but i don't know where it actually connects up to. i know it is power for...

I've recently bought a VC Commdore L with a 3.3 202 blue motor and i was just wondering if anyone had some good ideas or mods to help me make it run abit better and gain a little more power without going over the top with modification? Cheers in advance

Wickham_1995 submitted a new Showcase Item: 1981 Holden Commodore Read more about this showcase item here...

Wickham_1995 submitted a new Showcase Item: 1996 Berlina Series 2 Read more about this showcase item here...

I was just wondering if anyone could help me out here. I bought a few gauges and i've got most working bar one, the coolant temperature gauge. It's fairly straight forward to wire up but still can't get it to work properly. There are four wires; positive, negative, gauge color and sensor...