Search results

Correct as Carmody explained I did mine like that swapped the cushions and covers together

Hi I'm trying to swap my foam from passenger to drivers but I can't get to the bolts that hold the seat to the rails the bolts are between the seat and the rail underneath the seat I can't get a spanner in there to undo them how did you do it

Hi I'm trying to swap the foams onmy vx but I can't get to the bolts that hold the frame to the rails how did you do it like looking at the bottom of the seat the bolts are on the inside under the seat part I couldn't get to them

Hi guys can anyone tell me if it's ok to put wk statesman speakers in my 2000 vx commodore the ones I have are factory 4ohms 50 what I think not 30 but the statesman ones are 2ohm 30 what will that make a difference do they need to be connected to an amplifier I don't have an amplifier and can...

Hi guys if your buying an aftermarket head unit Chinese brands like erisin eonon xtrons etc.etc.and you want to retain your steering wheel control for vt and vx it's not that hard. STEP. 1. Unpack your head unit and find your steering wheel control wires usually with iso harness or they will...

Hey I know this is an old post an old post just a question does the removal of the cage apply to vx as well I want to remove it and cut away the the piece like a half plate at the back so all the wiring will fit

Hey nukehim. if you want all four lights to come on follow my instructions below. I have bixenon hid projectors for low beam and hids for high beam for all 4 lights to come on when you flick to high beam you must connect the positive wire from your ballast to the negative wire to your high beam...

Here are some photos of the t5 5050 smd installing in a traction control switch goes the same for power switch. Work out witch side is positive and negative and bend the globe up to shine to the cap of the switch from memory the top half of the brass contact on the switch is positive where you...

I used t5 5050 smd leds for traction and power all you to do is remove them from the t5 holder and put them on your traction and power globe holders they come already with resistors if you want i have traction and power switches already made up with blue leds if you want i will send them to you...

Looks good but your needles are very dull why is that .

Hi guys i have done a blue led conversion on my vx i used 5050 smd non waterproof led strips in my cluster and the same in my heater unit for the strips to get power i connected the positive and negative wires to a globe socket i used the temperature guage socket for one side and the fuel...

Ha ha ha i loved tonner mats post he is apsolutly correct LOL

Ha ha ha i loved tonner mats post he is absolutely correct. LOL cant stop laughing.

I had the same problem it was the disc rotors the got worn on the inside where the shoes make contact with disc rotor the shoes had made a channel like a deep groove in the rotors and it made no difference how much i tightened the cable they would not grab in reverse so i replaced the rear...

What do you mean excavation

Hi guys i have seen some threads about people wanting to do all there switches and cluster with leds... no hot spots in the cluster as i use led strips inside the cluster.. not globes that give a hot spot.. this way i dont have to scrape the green film away from the back of the face dials the...

Hi guys I do all vts vxs dash conversion as in all switches no painting dashes. cluster conversion with blue LEDs I do all your switches heater/aircon unit ETC.ETC and I can change your gear shifter and handbrake to vy vz leather ones and satin bezel all you have to supply is the hand break...

Hi guys I do all vts vxs dash conversion as in all switches no painting dashes. cluster conversion with blue LEDs I do all your switches heater/aircon unit ETC.ETC and I can change your gear shifter and handbrake to vy vz leather ones and satin bezel all you have to supply is the hand break...

Hi nicko i was looking at an old thread about vy steering wheel in to a vx with the horn wires i see on the vy wheel there is a black and a yellow wire connected to the red plug but separating. so you just connect both of those to a new crimper and connect it to the vy plate correct ?

its the tensioner as stated above i had the same problem i fitted one today my belt was slipping and the tensioner pulley was at an angle last night i heard this thumping noise coming from the engine bay when i had a look pieces of the belt had ripped away and hitting the motor and engine bay i...

hi guys i did mine today i bought the 0 rings from holden as the gentleman said in the above post i fitted everything correctly but i forgot to lubricate the 0 rings and apparently as i inserted the inlet pipe the 0 ring must have got caught somewhere along the way and it got cut when i filled...

hi guys i did mine today i bought the 0 rings from holden as the gentleman said in the above post i fitted everything correctly but i forgot to lubricate the 0 rings and apparently as i inserted the inlet pipe the 0 ring must have got caught somewhere along the way and it got cut when i filled...

hi guys i did mine today i bought the 0 rings from holden as the gentleman said in the above post i fitted everything correctly but i forgot to lubricate the 0 rings and apparently as i inserted the inlet pipe the 0 ring must have got caught somewhere along the way and it got cut when i filled...

Hi mate i have a vx and i have connected the led strips to the ignition light where your keys go in i connected the first one under the dash drivers side then i taped in those wires and took them across under the dash to the passengers side now when i unlock the the car with my remote the leds...

Hi guys just wandering if anyone can tell me what coloured wires illuminate the climate control and what coloured wires illuminate the LCD display i know the small plug illuminates the buttons and the large plug illuminates the LCD display but dont know what coloured wires.

I have a vx and i connected mine to the wires on the ignition light on the steering column i presume ve's have that as well i connected the first one under the dash drivers side then tapped in to that to take the wires across for the passenger side very easy and now when i use the remote to...

Hi guys just wondering if any one can tell me the colour of the positive and negative wires on a vy vz headlight switch plug thanks

Your right i thought i saw it when i was scrolling through all the different settings. You cant change it it doesn't appear any where if you have digital read out.

When you have the digital read out You can still get to the overspeed settings through the trip computer and disable it i cant remember how of hand i will try on my car and post instructions.

no you dont need any thing else with this harness just splice in to your parker positive wire .

I agree i have been using penrite 10W/50 full synthetic as long as i can remember in all the cars i have had. the best oil out there and australian owned.

No problem happy to help for the dimming to work your DRL must be at least 6watt each

When you start your car the DRL come on automatically and i have connected the white wire to my parker positive wire so when i switch my parkers on they dim by 40% and when i switch my car of they go out when the voltage drops to 13 volts if you want to connect the white wire to your headlight...

Hi guys i saw a post on how to connect led strips to come on when your door opens well in that post it says to connect them to your dome light wires instead of looking for them in the pillar .my connection is much easier i have connected them to my key ignition light .. STEP:1 remove upper...

Sorry did you mean you had H1 hid in there at the moment .

If you only have hid for low beam are they in your original headlights. is it the h4 hi/lo with a harness and ballasts

The harness i use is very basic easy to connect red wire to batt positive black to batt negative and drls red wires positive to harness red positive and black negative wires from drl to black negative on harness so the harness hass 2 red wires and 2 black wires you can tell witch are for the...

I have istalled DRL and when i start my car the DRL come on automatically and i have connected a white wire from the harness to my parkers and when i turn my parkers/headlights on they dim 40% and when i switch my car off after about 15 20 seconds when the the voltage drops to 12.8 volts they...

Hi i have 35 watt H1 HID hi/lo bi xenon projectors with angel eye/ halo that i retro fitted i took my headlights apart and fitted the projectors i used a H4 hi/lo harness and wired them up so all 4 come on when you switch to high beam to have this happen weather you use normal globes or hid...

Hello mr max i have posted a thread in the how to section on putting a vy shifter in a vt or vx check i out .