Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. B

    L67 manual conversion

    Okay well i didnt realise that but i was leaning more towards the t56 anyways but I'll have to save up a bit more haha ill start looking into tail shaft, crossmember and adaptor plate now also the wiring loom i think would be different?
  2. B

    Heat coming from dash, help?

    Does ur windscreen fog aswell and is the heat damp/humid?
  3. B

    L67 manual conversion

    Hey I've been looking into converting my l67 into a manual i know t56 would be better than the 5 speeds but I'm having trouble with finding out what parts to get to fit my car with t56 in terms of pedals, clutch master cylinder, loom, cross members etc also i was thinkin stuff it for the price i...
  4. B

    remove which muffler?

    P plater yo hahahahah
  5. B

    remove which muffler?

    Just had to put FE2 suspension in cuz my exhaust is so big and low with the extractors n high flow cats they did me for to low even though the rest of the car was 130mm, VIC roads had to check it for the Canary
  6. B

    remove which muffler?

    Aiight mad that sounds good because I'm a P plater I don't really want it to be louder than it already is haha
  7. B

    remove which muffler?

    I have 2 1/2 inch red back exhaust with high flow cats and one of the first mufflers has fallen apart inside was thinkin of just removing those will be left with just rear muffler.. Thoughts/Advice?
  8. B

    Vx super6 lifter noise and oil light on start up

    I've said it goes off after ignition is on for a second I am a mechanic lol I just haven't got experience with rebuilt engines not even a year since being qualified so yeah haha and I know it could be the oil pump even though I know he put a new one in I've heard a lot of bad things about he...
  9. B

    Vx super6 lifter noise and oil light on start up

    Actually I don't know why I didn't think of that haha very smart idea :) thanks then at least I can see if there is a problem and I will change the sender Aswell. I'm going to go thinner because it's just been rebuilt 10000 ago and I couldn't hear the lifters with 5-40 in so I'm going to go 10-40.
  10. B

    Vx super6 lifter noise and oil light on start up

    Damnn that sucks mate I had problems a week after I got mine all the pulleys went and just all general items like fuel filter spark plugs and leads hadn't been changed in ages just had oil and filter done a lot.
  11. B

    Vx super6 lifter noise and oil light on start up

    Yeah exactly I knew that was a reply to EYY haha and yeah it does of course and well it says they did on the invoice and new lifters Johnson hylift roller lifters it has high ratio rockers Aswell 1.9/1.95. I'm going to go back to 10-40 like u said and just get a decent brand mobil1 or Penrite
  12. B

    Vx super6 lifter noise and oil light on start up

    Nah it's not one when u first turn ignition on its as soon as the engine actually turns over, I was thinking it's sort of normal for some noise but also its worse with heavier oil was actually quieter with 5-40.. With the injectors I just got Remanufactured ones from mace but I did a pump a...
  13. B

    Vx L67 flex plate

    Getting Remanufactured torque converter from ATE (270) and new flex plate (150) happy with those prices
  14. B

    L67 spark plug help please

    1.1 gap is good v6performance and l67torque say set gap to that I'm pretty sure but mainly if ur doing exhaust and C.A.I etc
  15. B

    vx super6 (L67) trans

    Need flex plate and torque converter for L67, does anybody have some?
  16. B

    Vx L67 flex plate

    Yeah exactly even if it's just a quick fix for the moment need the car on the road even if I have to be a nanna till I get proper replacements, short of cash this time of year thanks for the help anyways mate
  17. B

    Vx L67 flex plate

    Okay thank you very much for the help and definitely going to get it done at a shop then just had engine rebuilt and was bottom end that went don't want that again.. Snout rebuild next Did just read that the super6 has a bigger torque converter, the stock one will be able to handle it yeah?
  18. B

    Vx L67 flex plate

    Oh okay glad I asked then and yeah I was going to wreckers in next couple of days to get a flex plate and torque converter anyways wasn't sure if I was gunna have any luck.. The stock Ecotel flex plate and torque converter will work fine with the extra torque. I will definitely compare anyways...
  19. B

    VU SS Alternator

    Crank sensor may be on its way out to but with dash lights and that out sorry didn't read this part definitely sounds like alternator
  20. B

    VU SS Alternator

    Never trust the colour indicator on the batteries, you won't know really until u check voltage of battery when car is off and running do a voltage drop test when car is running.. With multimeter on neg and pos while car is on turn headlights on and operate windows if there is a major drop below...
  21. B

    Vx super6 lifter noise and oil light on start up

    Got told I need a new crank angle sensor could that be the problem also sometimes when I start it blows smoke but it was/is running rich a lot of carbon in extractors :/ haha
  22. B

    2001 Holden Calais

    Brad_BlackL67Calais submitted a new Showcase Item: 2001 Holden Calais Read more about this showcase item here...
  23. 2001 Holden Calais

    2001 Holden Calais

    2001 Holden Calais
  24. B

    Vx super6 lifter noise and oil light on start up

    Just had engine rebuilt including heads but the guy didn't put new pushrods or valve springs in didn't realise for a few weeks, got new crow springs and chrome moly pushrods (pretty sure that's it) and thought it would fix it but still the same tried 5-40 10-40 15-40 oil there wih all but worse...
  25. B

    Vx L67 flex plate

    Hey, just wondering if anyone knows if the flex plate on l67 is the same as standard v6 got a crack in mine think it's broken a bolt on the crank it's crack from the Middle out... Also torque converter had a mate tell me I should get a 2000 stall converter instead of a genuine what's a good brand?
Top