Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. L8N

    Please Help Cant Drive To Work Morrow!!asap Please

    yeah that hapened to my mums wagon. there is a bit of the barrel that breaks of and jams it up. we had to get a lock smith out and it took ages to get fixed. but the locksmith had never seen one that bad.
  2. L8N

    strut braces

    they stop the flex between the strut towers
  3. L8N

    Im no good with subs and amps...help

    try the jaycar amps aparently they are all right and are reasonably priced. $400 for a 800wrms mono block. then for a sub you will prob end up spending around the $200 mark. the 600w earthquakes seem all right. go have a look at jb hifi or at autobahn. mabey even try and pick something up second...
  4. L8N

    Throttle Body

    you can but i didnt want all that carbon going through my motor. plus by taking it off i no i got every bit off carbon. and the plume was polished at the same time as well while it was off
  5. L8N

    Next Mod

    try 3.9's in the diff, cause 9.11 is not a ratio and u would have **** all top end if it was. i reacently have put in 3.9's lsd and new bearing. and that was $1500 instaled, but then you also have to get the spedo corected if you change the ratio. mabey get a twin throtttle body, put the cam...
  6. L8N

    Throttle Body

    i took the top of the plume of and used nulon throttle body and carby cleaner, its great stuff lifts all the carbon build up straight off. i tryed it with petrol and a tooth brush on the inside of the lid and it didnt do ****. so i sprayed this on and it wiped straight off and it was clean as...
  7. L8N

    Super charger kits for 3.8 v6's

    it should bolt up but the internial are different.
  8. L8N

    Musical air horn

    that could solve it but thats the way i put them cause that was the easyest way(might even have been the quality of horns as well i mean if yours are ten years old they must be pretty quality not some cheap ****). if i get new ones they will be mounted under the boot floor.
  9. L8N

    Altezza Light pics

    ive been looking for some like that for ages. is there anywere else you can get them from as i have never seen them on ebay. and how much did you pay for them if you dnt mind me asking
  10. L8N

    anyone know any good tips?

    speaker pods for your car? just cut out your rings out of mdf, and make them so the speaker recess into them,(2 parts glued together) then round the edges on the outside make the shape up you want as a base then make a spacer block that hold the two apart at the right space and angle then...
  11. L8N

    Weirdest Things Found Under Your Backseat

    i found a few coins under the back seat, but in the doors i found some children books little bracelets and in the driver door $5 and in the pasanger door $30
  12. L8N

    Musical air horn

    yeah m8 i did the same thing had the original horn and had the air horns on a seperate switch. never been defected for it and i use to do it all the time. im pretty sure that they are ilegal as only single tone horns are allowed or something like that. mine were put under the battery and the...
  13. L8N

    B&m Launch Control Kit

    your diff should only spin right. but aparently it can dual if its pointed straight (i think that it is more a sign of wear and tear). mine use to dual, sometimes the left would even cake it harder that the right. and now my diff is stuffed, so have fun:D what kind of line locker is it and how...
  14. L8N

    Neon boot wiring

    under the dash to light up the foot wells is the most popular spot for neons then just get a 4way adaptor thats the easyiest way
  15. L8N

    URGENT,important installation help needed

    poke a hole in the gromit and feed it through from the cabin. i think it is quite hard to see from the engin bay cause the brake booster and all that good stuff is in the way but once you have about 30cm though u should be able to see it in the engin bay then just pull it till it reaches the battey.
  16. L8N

    Led Window Washer Nozzles Wires

    m8 they are fair cheap and stuff up real easy. plus if you get pulled up by the cops. they will get you for them especially if they are on cause ur headlights are on. but if you really want to do it then just splice it on to the green and black wires for the little parker bulbs in the head...
  17. L8N

    Replacing the standard diff with LSD

    custom vs, was that qoute drive in drive out for $400. and is that the standard ratio if not what ratio did you get
  18. L8N

    supercharger wanted and body kit for vs

    it can be used over 2500rpm if its allready going but not if u booted it then go ohh i forgot to put the blower on and wack it on. if you dont like the idea of a clutch pulley then just put a smaller pulley on run more boost and bye bye clutch pulley
  19. L8N

    supercharger wanted and body kit for vs

    crs kits bolt on in about 8hrs or something like that and cost $2000 and runs like 3psi with the clutch pulley or you can lose the clutch and run more psi. http://www.rodshop.com.au/superchargerholdv6.htm um i recon vx body kits look goot on vx's, but i also think there are better looking kits...
  20. L8N

    Missle Switch With Neons

    um well if you plan on adding more neons later then i would get a four way adaptor for the ciggy plug then plug the neons in to this. then cut off the ciggy plug on the end of the 4way then cut the wires of the ciggy lighter indash wire the +ve to the +ve and -ve to the -ve then find were in the...
  21. L8N

    Flaming exhaust

    mabey just a ignition coil to provide the spark then a spark plug lead to a spark plug in the exhaust. most of these kits say it should work on v6's but, you might have problems with it when it is running on lpg as it prob wont flame as there might not be anything to be burnt
  22. L8N

    POD filter vs air filter?

    if you just want to go the holden super6 over the radiator CAI then it would cost from $60-$90 depending if you got the CAI bottom half of the air box or modifyed yours to sute
  23. L8N

    Neon boot wiring

    why dont you just wire it in to the boot light so that when the boot opens the neons come on. because whats the point of having them on with the lights when you wont see it half the time. too wire it in to the boot light find the switch that turns the boot light on and off then pull the wire...
  24. L8N

    URGENT,important installation help needed

    the clutch gromit is like to the left of the brake. just take the fuse cover off and that bit of plastic at the bottom of the fuse's then up to the left of the brake were there cables go though the firewall there should be a spare gromit that is easily large enough to put 0gauge though.
  25. L8N

    URGENT,important installation help needed

    if you have a auto what about the clutch gromit?
  26. L8N

    20 things to do at a drive thru

    ohh another one is to adjust your windscreen washer jets so it fires in to the drive though window. i hav heard of that one being done, hav never tried it though
  27. L8N

    20 things to do at a drive thru

    haha ive done the reverse one
  28. L8N

    brake ducts

    chears. ive got 17x7inch rims with 235/45 profile tires and ive got standard size sloted dba rotors with bendix advance pads. i would like to up grade to the vt rotor and twin pistion caliper oneday with a one inch mater cylinder, but untill then i want to maximise the potential of what i have...
  29. L8N

    L8N's vs commodore

    i think that the early ecotecs had t5's then the later modles had getrag 5 speed. mine was converted from auto to manual
  30. L8N

    Vr Parcel Shelf

    by material i mean something that is not 100% cotton, something slightly stretchy so it will pull tight, and for a parcel shelf something not to think but if you were doing a sub box you would want something about 1/8 of a inch thick (the pic shows how the material makes the desired shape of the...
  31. L8N

    L8N's vs commodore

    thx, yeah i want to go all black and get black leather bucket seats and get a new rear seat and get that retrimed to match the bucket seats i recon it would look alrite with that kit mabey change the side skirts though if i cant get them to work with the aero door moulds. yeah i think they r...
  32. L8N

    Chrome door handles???

    get vr-vs door handles as they are metal then they would be able to be cromed, the plastic ones can be cromed but it is a fair effort and i think it cost a fair bit more too
  33. L8N

    L8N's vs commodore

    thx here are the interior shots. im not to happy with it so im prob going to change it all soon when i get some $$$. i was going to remove the side moulds but i dnt want the paint to rip off and i dont want someone to smack into my car doors (alittle protection is better than none) and i got...
  34. L8N

    Vr Parcel Shelf

    the stock parcel shelf doesnt look that bad when it is trimmed though (ive got a vs not sure if the design changed) and when i had 6x9s i just had a spacer didnt look that bad in my opinion.
  35. L8N

    L8N's vs commodore

    Model: vs exec Colour: white Bodykit: vs supercar front bar, wgr side skirts and rear bar, group a bonet buldge Engine Type: 3.8L ecotec Engine Mods: cai Exhaust: extractors and 2 1/4inch exhaust Gearbox: t5 manual Diff: stock Brakes: dba sloted rotors allround Suspension: lowered (not...
  36. L8N

    Vr Parcel Shelf

    so you want to make a fibreglass parcle shelf? or just a flat one from mdf? if you were going to make a fibreglass one then basicly all you do is; * get some 18mm mdf (or however thick it is from the grill of the speaker to where it sits flush) trace around the grill then trace around...
  37. L8N

    Getting car up on ramps

    Muttley as EcotecManiac your car should be level when you change the oil so all of the old oil comes out. a small trolly jack and four axel stands would be the easyiest way NEVER GET UNDER A CAR SUPORTED ONLY BY A JACK. same here. the other day when my dad and i changed the oil in my car it...
  38. L8N

    I NeEd MoRe IdEa'S!!!!

    let us no how the roof turns out. and with the parcle shelf i recon you should do a fibreglass one up with the 6x9's and the amp that would look nuts
  39. L8N

    Cold Air Intakes

    you can go to holden and get 3 of the rivits which would cost u under $10 or what i did was cause i only ordered one rivit by mistake i got two small button screws then put a waster on drilled a piolet hole made sure it wouldnt hit anything then screwed the button screw in with a screw driver.
  40. L8N

    I NeEd MoRe IdEa'S!!!!

    i think they use cardboard or lino, something stif with edges so you can see the edges of the design. wouldnt foam colapse too much? some other sujestions are * vy ss pedals (they are not ilegal like the ones you hav and they come with a foot rest) * painting kick pannels & running...
Top