Search results

I run these https://blingworkauto.com.au/product/k04/ and they have been flawless. Been on my car since new (parkers, plate lights, interior, they even make an indicator version for the side) for well over a year and no fault since. My car is a daily as well.

could you provide a link to said replacement bulbs? I will happily stand corrected.

**edited out misleading info** Since you are after 5000k you would probably have to go with a "generic" or universal fit H7 kit, which chances are you would need to drill a small hole to run wires, canbus module and mount the ballast somewhere. The ae-international kit has 4300k on offer if...

my redline wagon is a march 17 build. When i did its first major service in december they did the A/C replacement seal, without even telling me. I only found out when i read through the receipt whilst in the carpark

I try not to put my sunnies in the factory sunglasses holder. After work on a toasty summer day, my sunnies are too hot to touch sometimes. I will either have them in the space in front of the gear selector or in its case and in the glovebox or centre

I've always wondered how many times u can use launch control until the clutch disappears HAHAHAH

Hey mate, How legit bright are they? and how sexy is the instant on and off? HAHAHAH, Naaaa havent been flashed by anyone to this day, if anything i see it as extra visibility for on coming drivers.

35% all around. like a few have said, i dont want to hassle of insurance, legalities, police problems. A high quality 35% at certain angles look almost black.

I have these http://www.blingworkauto.com.au/product/klct15/ and no problems

Hey Jiv, The LEDs have been faultless on all corners of the car. No canbus errors. The rears I've got off my ass and put them in recently so can't comment yet. But the front and sides have been on the car since March and not a single problem, the car is daily driven of course.

SOAG, blacked out with legal tint and the HF20 is a mint combo. I have the same except wagon and with a black bonnet protector.

My bad on the previous post

SOAG Wagon :D

As per TSMAX and LS3SS, yes i have the 4300k and they are very nice. Initially I thought "****" when they arrived in a plain brown box. But after looking at them and putting them in they are very good in terms of on road performance. Just like what I have spoken to TSMAX about, they are...

minor price to pay for the features which spotify offers in my books

For spotify, create a family account. Its 18 bucks a month. Invite 5 family "members" it can be absolutely anyone to join your "family" Get everyone to set up automatic bank transfer of 3 bucks every month and all is well. $3 bucks a month for spotify premium is stupidly good value of you ask me.

IF you bought a kit made specificallyfor the VF it wouldnt have this problem. It looks like you might need a CANBUS resistor to solve the flickering issue. To give you an idea I run these...

these cars are fantastic high way cruisers. i just did a sydney to canberra and back (for work) and its fantastic. barely even a gear change going up hills especially in the V8s

this will be interesting SOAG + some chrome bits. I have seen them on the chev ss facebook group though. You will love SOAG mate, just moving from shade into the sun and its almost a completely different colour.

on ya mate, have fun :D

Sure did mate. I've done plates, parkers and interior with these http://www.ebay.com.au/itm/KONIK-T10-CANBUS-COB-WHITE-LED-PARKERS-Rego-Interior-light-W5W-FOR-VF-Commodore-/111303782447?epid=1390529608&hash=item19ea38f02f:g:Ev0AAOSwOMdZTbgG But they look sold out. I have also used these...

Yeah man super easy. High beams and parkers you just have to open the bonnet and its all accessible. Low Beams, you will have to go through the wheel arch. So a couple of torx screws and u can fold the wheel arch liner back slightly and you will be able to stick you hand up and reach the back of...

Hey mate, have you considered these -> http://www.ae-international.com.au/vf-commodore/holden-vf-commodore-low-beam-headlight-hid-conversion-kit-canbus-h7-35w/ I have these in 4300k for the reasons mentioned above. They are made for the VF and completely seal with dust cap and no canbus error...

https://www.facebook.com/groups/clubvfofficial/

BTW, if you are on the club VF facebook page. The makers of these is on there actually and is happy to answer questions

Front indicators u need to go through the wheel arch. Side ones u need to get the grille thingo off. an old credit card or trim removal tool wrapped in a microfibre should do the trick. The back, as u would change a bulb plus you need to splice in the resistor and find a place to mount it. This...

https://drive.google.com/file/d/0B6q-4TljCr-NZ2V4dGpPdHdUSXc/view?usp=sharing Here you go mate. It doesnt show in the video, but the blinks are instant on and instant off. The bulbs i used are part of the kit i bought from blingautoworks includes front, sides and back + canbus resistor for the...

if by depth you mean distance, definitely. General light output is amazing as well.

fair point, how much did it cost you?

just curious mate, why the rotofab over a traditional OTR (walky, harrop, vcm and so on)? although those rotofabs are very popular over on the chev ss facebook page.

I'll quickly snap on once I'm home from work

Im keen to see it in action. Be our guinea pig? ;)

OH BABY I AM IN LOVE <3 HAHAHAHHAHA When i was buying mine it was either this colour or SOAG. I went with SOAG but damn sure as hell if i went LMF i wouldn't be disaapointed.

Hey bro, installing either LED or HID (assuming u get the ones made specifically for the VF) is piss easy. For the low beams you will need to go remove (not all the way) the wheel arch lining and go up from the wheel arch. For the high beams you don't need to do anything as it is accessible with...

Drove past Lansvale Holden (NSW) There was a red Motorsport edition with lip spoiler sitting in the yard. Dunno the price just saw it when driving past.

Hey, if u dont mind me asking, which focal 6.5' splits and rockford amp do u have specifically? like model number and such. Im looking to upgrade the audio in my wagon and is reaseraachnig for ideas

come and software update it to include apple CarPlay/android auto. its a stretch but a man can only hope

Mine, have just ticked over 3600km with fuel sitting 16.8l/100. But that being said i do heaps of in city peak hour driving to and from work.

Hey bro, I use the Bowden's snow foam gun. You can pick them up from Autobarn. I believe are about 99 bucks with adapters for most brand pressure washers. I have a Gerni and it works beautifully.

Fuark mate mint wagon. Love the black roof