Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. Ando3418

    Ute Hard Lids

    Hey mate do you have a photo of the hardlid? Theres 2 different styles butbone is very rare and ive been trying for months to get a part number or something
  2. Ando3418

    Gm tech 2

    Trying to avoid having to send it off bud. Its a pain in the ass
  3. Ando3418

    Gm tech 2

    Aaah ok. That sucks. Really need to adjust kms on clusters lol Ive read a thread where a few people bought the copies without issue but their links dont work anymore
  4. Ando3418

    Gm tech 2

    Looking at buying a tech 2 but got a few questions first. If i get access to tis i think its called can i change the km on a cluster as well as reprogram it? Also does anyone have a link to a decent clone. All the links in the older threads no longer work. Will be used for pretty much everything...
  5. Ando3418

    Vy diff centres

    Ok. Pretty sure we are running 28 spline from memory. Those can be a pain. We did 2 right hand side axles in 2 meatings. And actually snapped one a few years ago as well.
  6. Ando3418

    Vy diff centres

    Well they have 3.7 stamped on the crown gear not 3.73 and they in a borg warner diff out of a vn commodore.
  7. Ando3418

    Vy diff centres

    Ill need m78 gears. My diff is a m78. Its a vy s pac manual. 3.08 open. Its be m78. So ill get a m78 lsd centre and dana spicer 3.73 gears for m78 and a bearing and seal kit and do it up. Yeah the gears in the amca is a flat 3.7 we get them out of the manual r31 skyline. Using the borg warner...
  8. Ando3418

    Vy diff centres

    What we need is very specific and they have been very hard to get. They need to be exactly 3.7 not 3.73. I cant remember why exactly but had to be specifically those we usually get them around 150-300 but have seen people pay upto 500 for a decent set for the track
  9. Ando3418

    Vy diff centres

    The 3.7 gears for the lives axles are going for as much as 500 out of the manual r31s. Worth their weight in gold. Its what we run in the amca. Aah ok. If its the same wont be an issue. Is there anyway i can check my diff is the m78 from the outside? Wanna know whatbin lookin for before i go...
  10. Ando3418

    Vy diff centres

    Aah ok. Might be easier to get a cheaper like 3.07 m80 housing n change centres n gears n new bearings. Im assuming if i change an open centre to lsd centre thats all there is to making it lsd? Im used to the old borg warner live axle diffs. This stuff is new to me.
  11. Ando3418

    Vy diff centres

    Hey guys so ive got an m78 diff i believe. Wanting to go a 3.7 lsd which only came out in m80 i believe n cant get any decent 2nd hand ones n the rebuilt ones are like $1500. I can get a reonditioned m80 lsd centre new 3.7 m80 gears and a bearing set for less. If i change the centre as well as...
  12. Ando3418

    Vy guages

    Side* but i dont think itll fit. There a fsir size plug.
  13. Ando3418

    Vy guages

    Nah sump plug is on the bottom.
  14. Ando3418

    Vy guages

    Ok. Thats a good point. I cant see it being accurate and can see it just askin for leaks. Accordin to the mob selling it thw oil filter holds it on. So just thought id ask the question. Might be better off just running all the wires and mounting guages etc n just tuck it up outta the way n then...
  15. Ando3418

    Vy guages

    https://m.ebay.com.au/itm/SAAS-BLACK-OIL-ADAPTOR-SANDWICH-PLATE-FOR-OIL-PRESSURE-AND-OR-OIL-TEMP-VR-VS-V6-/173149885756?_mwBanner=1 The mob that sell the guages are recommending this. Does it work? And would the readings be accurate? They are electronic guages not mechanical. Id be running both...
  16. Ando3418

    Vy guages

    Oh ok fair enough
  17. Ando3418

    Vy diff

    Awesome cheers mate its much appreciated
  18. Ando3418

    Vy guages

    Where does the sensor mount? Thats all im concerned about
  19. Ando3418

    Vy diff

    Ok sweet so it wont affect how it bolts up n i wont have to change tail shafts or anythin?
  20. Ando3418

    Vy guages

    Where does the ve ss oil temp sending mount?
  21. Ando3418

    Vy diff

    Ok whats the difference? Will an m80 diff bolt straight in? Like r8 or ss diff?
  22. Ando3418

    Vy diff

    Hey guys just a question do the series 1 vy s pac run the m78 diff or the m80
  23. Ando3418

    Vy guages

    How the hell would i mount it in the sump? And i know alot of cars that come with them have them up the top of the engine like bmws n stuff. But where do the ve ss mount them? They have them standard as an optional extra.
  24. Ando3418

    Vy guages

    Hey guys gonna be putting a oil pressure and oil temp guage into a vy s pac. Wheres the best place to put the oil temp guage? Oil pressure thinkin of using a t-piece where the old oil pressure switch is so i can rum them both so ecu is still getting its readings. But then where do i put the oil...
  25. Ando3418

    Egt guage

    Hey guys got a vy v6 im doing a fair bit of work to. Looking at running an egt guage because of the money being invested in those motor dont wanna see it blow up. My question is if i put the sensor at the back of the y piece in the exhaust and run a single guage will it read true or do i need to...
  26. Ando3418

    18 inch rim offset

    So im looking at a set of 18 x 8.5 rims for a vy s pac. Itll be lowered all round on sl springs with shortened kyb shocks and struts. I wanna run a 245 wide tyre all round if i can. The only offsets available on these rims are 40 and 45. So im wantin to know if that offset will be ok and what...
  27. Ando3418

    L67 wiring loom

    Ecu and pcm should be fine using the pcm hacker program or whatever its called the my dyno fella uses to completely redo my ecu bcm and pcm. He can completely rewrite all 3 with it so i shouldnt have any issues there. Its the harness. And of course the money for the scale of build im lookin at...
  28. Ando3418

    Vz bonnet scoops

    Looks alright on the vy aye
  29. Ando3418

    Vz bonnet scoops

    Has anyone put an xr8 bulge or a camaro zl1 scoop on a vz bonnet? Curious to see what it would look like with the agressive lines of the vz bonnet. Trying to decide what path to go.
  30. Ando3418

    L67 wiring loom

    Hey guys looking at building a l67 to put in a vy s pac that currently has a standard l36 ecotec. Just wondering if there is any difference in the wiring looms? And if so will i need a whole new loom or can the existing one be adjusted? Thanks
  31. Ando3418

    V6 Peformance Parts

    So if i put the foot down at a track day or something the engine wouldnt stick a leg out of bed if i dont get it balanced? Thats my biggest concern. Thanks for the advice :)
  32. Ando3418

    V6 Peformance Parts

    Ok at this stage i have a 25mm manifold insulator 12mm plenum spacer with cai soon to come and solid intake piping. Im also planning pacemaker extractors into a 2.5inch high flow cat into a single 2.5inch system to the tips. And a stage 2 cam kit from you guys but at this stage no machining will...
  33. Ando3418

    Vy steering rack

    Aaah ok. So cant even use adaptors to make fittings fit or anything like that?
  34. Ando3418

    Vy steering rack

    Hey guys. Steering rack has let go in my mates vy. But we have a ve series 1 parts car here with a good steering rack. Does anyone know if its possible to put a ve steering rack into a vy. Thanks.
  35. Ando3418

    Vy suspension

    Its my mates. I have a ve now.
  36. Ando3418

    Vy suspension

    Its my mates. I have a ve now.
  37. Ando3418

    Vy suspension

    Hey guys im lowering my vy s pack. So far ive got kyb shortened shocks all round sl front springs and all new rubbers throughout. But i cant decide on whether to go sl or ssl rears. Itll be sitting on 18s. Can anyone show me what theirs looked like with sl front and rear or sl front and ssl rear...
  38. Ando3418

    What exhaust should i get

    Hey mate i got my tax return. Can i order that exhaust now please
  39. Ando3418

    What exhaust should i get

    Pretty sure im getting a single 2.5inch manta catback and pacemaker headers. And im leaving the single standard cat for now for financial reasons but ill eventually change it to a highflow. I just want a nice deep note without spending big dollars. Not too fussed on performance just so long as...
Top