Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. T

    Vy clutch replacement help

    Hey so I'm looking at doing my rear main seal and single mass fly wheel conversion since the kits are cheaper than replacing the stock and obvs more clamping power and better performance, I own a 2002 vy v6 ute and my rear main seals leaking im wondering if anyone has a guide on how to do it if...
  2. T

    help what's wrong with me bommodore

    hey i got a vy 2002 ute v6 manual basically it's having cooked electrical problems i think and i don't know what's wrong any opinions would be appreciated basically for the past couple weeks i've been getting a check engine pop up but only when I'm driving in the morning at like 3:30am when...
  3. T

    Replacement seats, srs problems

    Yeah that's what I thought, so what happens if I unplug those, are they connected directly into the seat what's the best way to get around that
  4. T

    Replacement seats, srs problems

    Alrighty boys and gals, so ive got my fully sick commy Ute with some fully ripped seats, I've bought some fully sick aftermarket ones and ive got some questions I'm hoping some people can answer, basically it's the bottom line Ute it's got wind up windows stock everything it's also manual if...
  5. T

    Door switch power

    It's a vy manual Ute base model
  6. T

    Door switch power

    Hi I wanted to install ghost lights and the best option is to have power from when the door opens up, so I'm wondering where is the best place to get power from the door switches? Or what's the best way to go about it?
  7. T

    Where to buy reverse sensor clip?

    So I've got a manual vy V6 commodore Ute, reverse lights weren't working obvs checked fuses all good, so I checked the reverse sensor and I was getting power through the leads, so I just wiggled it around abit and it magically started working again but as soon as I jacked down the car boom no...
  8. T

    Door switch wiring power?

    Hey I'm wondering where I can power for when the doors open? I want to put ghost lights in the door and obviously only want them to turn on when I open the door automatically
  9. T

    Laws on sub boxes

    Yeah pretty much that's mad, I'll see how I go making my own square one so I can maximize space but I'll definitely keep that as an option
  10. T

    Laws on sub boxes

    Well I want the sub inside, cause I'm going to stick air bags and a comp in the tank area, but mainly I want it for aesthetics and to be a bit unique, I havnt seen a sub in the middle in a commy before so thought why not?
  11. T

    Laws on sub boxes

    Hey so I'm building a sub box that I'm going to screw into the shelf in my vy Ute, I'm just wondering cause obviously I can't have it cover the window I'm going to have have it come off the shelf and point down like a triangle, but I'm just wondering what's the legalities because it has a...
  12. T

    Ticking front right wheel?

    Yeah found a rock in the tread from driving through the gravel weird it made such an audible sound, just pulled it out and sounds fine, one weird thing I noticed is when I jacked up the wheel and spun it it made like a slight metal rubbing noise like a rough bearing would that be an indicator of...
  13. T

    Ticking front right wheel?

    Yeah just started driving noticed a ticking from front right wheel increases with speed and slows when I slow down, turning doesn't seem to make a difference any ideas?
  14. T

    By water temp gauge/sensor

    Oh so it's only when you have to change radiator water? I'll just unscrew the water temp gauge then? It's the same sized socket I never used it before when I changed it just drained out the bottom and filled at the top and left the radiator cap off it's been perfect for about 6 months
  15. T

    By water temp gauge/sensor

    Looks mint I reckon
  16. T

    By water temp gauge/sensor

    So what does that do? Cause I'm already using it and everything seems fine?
  17. T

    By water temp gauge/sensor

    Hey so I want to add a temp sensor and I found this random plugged hole can it go in there?
  18. T

    does doing a 180 degree turn at 100kms **** your car?

    Yeah too true, I'm not that great a driver managed not to die but so that's a plus, didn't write off the car either so also a plus :)
  19. T

    does doing a 180 degree turn at 100kms **** your car?

    well thanks for clearing that up load of stress of my shoulders
  20. T

    does doing a 180 degree turn at 100kms **** your car?

    Yeah sweet I was worried about like the diff and like all the **** that holds the wheels, I was thinking that going literally sideways that the force could damage stuff because of the force going where it shouldn't be going (no offence drifters) like at that speed should I be worried about...
  21. T

    does doing a 180 degree turn at 100kms **** your car?

    Is that all I have to worry about? Tires? Will they wear back down to normal? They're literally a week old
  22. T

    does doing a 180 degree turn at 100kms **** your car?

    does doing a 180 degree turn at 100kms **** your car? *story time* yeah so i was behind this lady in a 4wd and a truck carrying a tractor, the bloke in the truck was doing like 80kms in a 100 zone so i decide to over take, turn my indicator on nice long stretch of road, start to do it and the...
  23. T

    wideband O2 sensors a/f gauge

    Yeah I heard those are the go because you can just replace the narrowband but I was just wondering if the evolution gauge does the same thing, it's only cause I have 3 other of those who gauges and my off couldn't handle having one off gauge lmao
  24. T

    wideband O2 sensors a/f gauge

    hey i wanted to get this http://prosportgauges.com/wideband-air-fuel-ratio-kit-EVO-Red-Blue.aspx but i was wondering do i have to weld in a new bung? or can i replace the standard O2 sensor, i know that it's a narrowband and this one is a wide band can it be hooked up or what?
  25. T

    oil pressure gauge install question

    Hey man just wondering do you have a photo cause that image is gone?
  26. T

    gauge installs - vy ecotec

    Here's a photo Just to double check
  27. T

    gauge installs - vy ecotec

    Hey so I had a look for where I'm gonna t piece the oil sender but all the diagrams show the thread hole on top but mine comes out the side is this normal?
  28. T

    gauge installs - vy ecotec

    so i've got the oil temp one sorted, just need to know what thread sizes the water temp one is and where it is, cause i'll wanna do a tpiece off that has anyone done a tpiece off the water temp one? is there enough room?
  29. T

    adding electric windows?

    yeah so i don't really wanna change the bcm, how many wires come off the window motors? do they have stoppers in the motors? can't i just add a relay and a switch to them?
  30. T

    adding electric windows?

    how hard is it to change from the window winder, to electric windows? how many wires does the electric windows have? is it possible to setup custom switches? amd how hard is it to install?
  31. T

    gauge installs - vy ecotec

    Yeah I think I'm just goona run a relay off the dimmer wire off the head unit
  32. T

    gauge installs - vy ecotec

    I don't know of any globe behind the shifter? (Manual btw)
  33. T

    gauge installs - vy ecotec

    what wire at the shifter would that be?
  34. T

    Installing Engine start button.

    A $1000 sound system it'll be worth 10k, nah it'll be pretty simple some custom fibre glassed tweeters into the a pillar, mid woofers in the door that'll be dyno matted, and a small slim sub in the middle between my seats (it's a Ute) that'll be fibre glassed in it and twin amps pretty basic but...
  35. T

    Installing Engine start button.

    Hahahahaaha I'm so sorry but I may aswell be Asian cause I love rice, I'm going to have a pretty ricey car once I save up a bit of cash, I'm talking leds, elglow, $1000 sound system, a pillar gauges, ghost lights, projector headlights, body kit, the works it'll make some people puke but I'll...
  36. T

    Installing Engine start button.

    http://www.car-lab.com/gear-shift-knob-stick-ignition-engine-push-start-button-red-led-light/ gimmicky i know but i thought it was kinda cool, the purple wire ya reckon? i'll give it a probe when i order the knob
  37. T

    Installing Engine start button.

    Yeah I own one, yeah I'm just looking for the starter wire, not quite sure how it works but I assume it'd have an in line and an outline where the outline would get grounded, and I'd just split that wire and run it too the turn on button, how shoukd I use the multi to probe for the right wire?
  38. T

    gauge installs - vy ecotec

    hey i wanna install a water temp gauge and an oil temp gauge along with a volt meter gauge. just wondering where do i t piece in the sensors for the oil and water senders. also what sizes are the threads of the orginal senders so i know what t piece to get? also for the water temp install...
  39. T

    Installing Engine start button.

    Yeah I want just a starter button, did we end up getting a guide? Or a wiring guide off the ignition barrel?
  40. T

    vy.... ignition barrel wiring / push button install

    hey i wanna put in a push button to start the car (i know you probably think that's gay af let me have my rice) http://www.car-lab.com/gear-shift-knob-stick-ignition-engine-push-start-button-red-led-light/ with one of these bad boys, of course this means i need to find the wiring into the...
Top