Search results

Hi all, PLS help. My little 304 has been stroked to 355 scat kit, ,running VN heads, are the standard plug length ok .want plugs are you using.

Hi all, PLS help. My little 304 has been stroked to 355 scat kit, ,running VN heads, are the standard plug length ok .want plugs are you using.

Hi all, building a 355 stroker crank girdle fitted I have had to add pipe to the pickup,about 2 cm the thickness of the girdle and spacers.but now the dipstick won't go in it hits the pickup .any one had this.

Hi all , hate to harp on it but i dont know enough about holdens. the story gos my vp auto let go, so smarty me thinks 5 speed. so i brought a getrag setup fro m a vs and with a lot of mucking around (making pedels / clutch cylinder) got it to work, so you can drive it. now for the BUT it...

Hi all , why do I have to change the computer from an auto one to manual one when doing a 5 speed conversion a vp Comme .

Hi all, just need to fit a set of pedals for my conversion, I have the right master cylinder and slave cylinder and a new pipe.i got hold of a set of vs pedals for a t5 , has the hook on top, can I adapt them for my master cylinder buy drilling a hole for the master cylinder link. Some of the...

Hi all, will a vs getrag. Bolt up to my buick vp.

The small cover at the bottom of the trans, mine has four bigish bolts and then 5/6 small nuts that go under back of the sump. Googled every thing and asked everyone, do i have the only one like it in oz, when u undo all nuts bolts it cant drop out of the way cuz steering In the way ,also goes...

you cannot remove the inspection plate it goes under the back of the motor, also my trans has three plugs two white ones and the speedo is the normal for a vp berlina, or has some one switched out the trans.

How do you get to the three bolts.

Pls help, how do u remove the auto trans if i cant get the torgue convertet bolt off.

turn up sound

Yeah, all good advice. But now I'm almost 2k out of pocket, looks like old bananas back on. Just waiting for them to reply after the 3 Jan, should be interesting, bad feedback hurts , also I can right a product review on there site lol lol

Hey, yeah one I did a few years ago, for my best mate.man this thing honks, $13k on the motor. Basically full blown race car, rego is. 3J improved production. On SI plates.

05 car is my track / club car . V8 five speed. The 015 I just finished for my son who is getting interested in motor sport v6 auto, also building a belt driven turbo for the v6.

hi mate. Do you mean gaskets at the front and rear, never used um .just use ultra blue. The front passenger side was wider than the back so got 16 thou tacked off. Made sure I put sealer round water ports,also put in k sealer. fail

Hi all, ok I'm in big trouble, idiot me brought a set of speed master ITBs for my vn 5 ltr. Yep go on get it out of your system , why did u do it???? you got warned this stuff comes back to bit you and it has, So now some 5 months in 6 x 5 ltr of oil 4 sets of gaskets. 4 tubes of sealer...

Hi all, wanting to change diff ratio for my vn v8. wanting 355/375/411 what other if any back ends fit. As im having trouble finding any, ebay want $400 just for gears, i brought a whole 3.08 lsd for 150. Will the centre or complete back end from other commies fit.

Hi all. Iam starting to get my VN ready for hill climbs and some track work, I am runnig a standard 3.08 with a mini spool.What does anyone recomend to get to to launch .

ok, here you can see the cap things fit under the retainers,do i need them.

Hi all, i have ported a set of vn heads and have new heavy valve springs, The old springs have a round disk that goes over the top of the spring then the retainer. The new retainers that came with the new springs dont fit in the round cup things, Should i just use the new retainers with out the...

Hi all new member here. I am building a vn Brock replica, I have a 5 litre v8 with under bonnet loom v8 comp and under dash loom fitted. The motor turns over but the system not live. Is it because the car now thinks it's been stolen. Any help appreciated but please make it simple I'm a...