Search results

I own a VT series 2 ('99) and i fitted a level 3 cluster (black in white) When i fitted it it showed that the vehicle it came off had done 180726kms and my level 2 had done 352860, a difference of 172134kms. It is working perfectly in all respects, eg trip computer, fuel average, inst fuel...

Temp gauge went up to between 1/4 and 1/2 then dropped between C and 1/4. Changed temp sender unit, bought temp gauge back to normal and MIL light went out and hasn't been on since. All Faults were cleared from memory and still no fault light has come up. Worth a try for the sake of $29.95...

I had similar problems:-----: I changed my temp sensor unit, Problem solved on mine

Does any VT owners have these problems: 1) the covers that hide the screws in the interior fall out of random places 2) the glovebox breaks on the boot release button side. There is a removable pin on the consol side. replace it and super glue the pin side of the backing plate on the pin...

GENERAL ENQUIRY. Could anybody tell me whether a VT (with a single view glass for odometer) and a VX (with a triple view glass for odometer) are compatible? I like the look of the triples but not sure if wiring loom is the same.

I had the same prob when i got my VT. I used the same steps as rch-13z with 2 exceptions. 1/- I used 200, 500, 1000, and 1500 grade wet and dry sandpaper 2/- When i completed the polishing (sanding) i used a clear paint to spray the headlights. Since then (3 years down the track) my headlights...

I have codes 47 and 44 on my '99 VT The engine temp drops from between 1/4 and 1/2 to between 0 and 1/4 just before these 2 faults show up. I have disconnected, cleaned and reconnected the CAS and same symptoms persist. Please advise by email to :- [email protected]

I did my spoiler, gear stick surround, dash cluster facia, grilles, and rocker cover about 18 mths ago. See attached pics for results.

Tnx for the detailed info. I am thinking of putting lights behind the garnish hooked up to the park lights to illuminate at night. Plus I have dust inside my right reverse light. It'll give me an excuse to clean it up lol. I have seen one in Queensland and it looked quite effective at night, but...

Changed address from Kerang, Victoria to Quambatook, Victoria

I have a vt series II (1999). My car keeps showing up codes 44 (RH oxygen sensor (lean signal)) and 47 (Crank angle reference signal (no signal)). These errors show no apparent difference to the operation of the engine or the running of the same. Just bloody annoying thjat engine management...