Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. Cuzzy69

    [VR-VS] How to install high ratio roller rockers from MACE

    does it matter where the crank is? eg valves open closed for the torque setting? thanks Justin. love your channel
  2. Cuzzy69

    Speed correct solved vs auto

    Vs auto v6. Dakota digital sgi-100bt $195 marks 4wd online Take output from trans witch is a 2 wire. blue color do not cut just add wire !!!!other is brown. not needed i wire ran under car up through a grommet under carpet into the dash area (insert into input!) unit needs + and - anywhere...
  3. Cuzzy69

    How to read the 3 marks on the tensioner?

    this seems to be back to front or upside down? the large spaced gap should be renew ? the other section for tight or right?
  4. Cuzzy69

    How to read the 3 marks on the tensioner?

    seems ok but is the advice back to front? a loose belt lowers the arrow not up to the marks?
  5. Cuzzy69

    diff ratio change. speedo correct! yer i know pls read

    great upgrade with the diff but as u know cars equal money lol. at least u know what speed your doing via deduction.
  6. Cuzzy69

    diff ratio change. speedo correct! yer i know pls read

    if only out 10% just guess. im out 26.3 percent with 3.89 so i had to do the adjustment. cheers
  7. Cuzzy69

    diff ratio change. speedo correct! yer i know pls read

    below 60 is up the creek.....lol 60 is close but 80 is very close and 100 spot on. every ware else its out. close enough not to get a ticket. it just works. i will buy a marks 4wd adapter in the future. the faster u go the more its out? not sure but im happy. thanks for the query
  8. Cuzzy69

    diff ratio change. speedo correct! yer i know pls read

    fixed!!!!! 60 is close, 80 is 80 and 100 is 100. under 60 its under reading but who cares lol. take off the needle and move it downward about 10mm. i put a new srcew to hold the needle at 0. i changed from a 3.08 to 3.89 diff. you may need to play abit with the needle location using gps to...
  9. Cuzzy69

    vt/x/y/z rear brakes on vr/s solid axle

    vs inner and vt outer shoes. used **** pads and im sure the inner disk is worn. caused a few issues like lack of adjustment and binding. i shaved the pads a bit and have a good hand brake now. will install the vented soon and redo with new parts. i had a diff seal leak so the hand brake pads on...
  10. Cuzzy69

    vt/x/y/z rear brakes on vr/s solid axle

    ps i have a vs wagon with non abs and live diff.
  11. Cuzzy69

    vt/x/y/z rear brakes on vr/s solid axle

    you mean 286mm ? i did your conversion with the non vented vt disks rear.. works great. i did the whole car master booster front disk caliper etc. all vt or vx same.. just to check the rear vented use the same caliper but diferent pads? i think this is correct ? cheers for the advice. im in...
  12. Cuzzy69

    W2A basic vs intermediate l67

    hi all i have a l67 with mace coils, mace custom chip (its awsum) and on my old stock ecotec i had manifold spacers worked great. My question is the base w2a mini blizzard is $1250. sounds great good value no problem. the next option is the intermediate which costs $2k. great extra cooling and...
  13. Cuzzy69

    Demister?? switch

    old thread but i used Hyundai mk2 eg about 1992 model switchers in my vh sle. fit perfect, look great and illumination is sweet, but need wire splicing from Hyundai wire loom to Holden very straight forward. looks factory
  14. Cuzzy69

    manuallised

    hi ya im using it like a sequential trans. not for burnouts lol. will get a b&m shifter soon. i like it for short shifting under hard acceleration and to avoid unwanted kick down when having a nice spirited drive as i live in mount dandy vic, (wet slippery sometimes)lots of bends etc. i also...
  15. Cuzzy69

    manuallised

    this works great! even better i used 4 relays to control it. has full auto or full manual with one switch. once in manual mode car must be restarted to go back to auto. will supplie diagram soon if interested
  16. Cuzzy69

    manual torque converter switch

    hi guys anyone know which wires needed to install a torque converter lockup switch? 4l60e. I just made it a full manual with a wire mod but manual toque lockup would be awsum. link for manual below works great.
  17. Cuzzy69

    vt v6 airbox into vs commodore. basic advice

    only cut the air box.. in front of box behind head light i made a 70mm approx hole cut for the cold air. i have fixed the link to my face book in the orig post for pics. i used nutserts and some 90 degree alloy brakets to mount.
  18. Cuzzy69

    Comment by 'Cuzzy69' in item 'VP hsv clubsport #207'

    big job great work
  19. Cuzzy69

    vt v6 airbox into vs commodore. basic advice

    https://www.facebook.com/search/top/?q=Justin%20Linton
  20. Cuzzy69

    vt v6 airbox into vs commodore. basic advice

    Justin Linton emerald vic... you will see the car pics The final installation has no pics yet but you get the ideal.
  21. Cuzzy69

    vt v6 airbox into vs commodore. basic advice

    the bottom housing is sealed to the lower guard with windscreen sealant to stop hot air. yes its bolted in place! lol
  22. Cuzzy69

    vt v6 airbox into vs commodore. basic advice

    Can see pics on my facebook Justin Linton
  23. Cuzzy69

    new vt air box, cold air induction.

    new vt air box, cold air induction.
  24. Cuzzy69

    vt v6 airbox into vs commodore. basic advice

    I have a l67 in vs commodore. for the intake i used vt intake with some vs bits to join to the air box. to get the larger air box (and larger filter) in i trimmed the bottom off to sit flush with the inner guard, about an inch approx. i used an old car style door trim piece to make it look good...
  25. Cuzzy69

    b&m shift improver transpak BM70365 4l60e

    hi guys any one got one of these working in manual mode with the 4l60e? cant find if that function is available with my trans. eg in drive its auto, in any other position it holds gears like a manualulized box?
  26. Cuzzy69

    Solution to vn-vs double din. 9 inch fitted in stock location

    screen shot of aldl droid software
  27. Cuzzy69

    Solution to vn-vs double din. 9 inch fitted in stock location

    hi guys i bought a 9inch screen off ebay full android for 175 bucks. has a single din back and fits great. it need to be screwed to the plastic insert from behind then fitted. you will need to cut plastic out of the way from the car insert but easy with a dremel. if you buy one its very self...
  28. Cuzzy69

    having trouble with hand brake adjustment! if i adjust the back just right they jam after a few...

    having trouble with hand brake adjustment! if i adjust the back just right they jam after a few turns back and forward causing them to jam on? (im NOT adjusting them to full on when i say jam.it feels like the pads are moving out of alignment once adjusted correctly)if i adjust off the rear to...
  29. Cuzzy69

    vt/x/y/z rear brakes on vr/s solid axle

    I tried this and rear brakes are awsum. im having trouble with the hand brake adjustment! if i adjust the back just right they jam after a few turns back and forward causing them to jam on? (im NOT adjusting them to full on when i say jam.it feels like the pads are moving out of alignment once...
  30. Cuzzy69

    L67 boost solinoid bypass

    I used a fuel filter from a brush cutter lol fits great
  31. Cuzzy69

    L67 boost solinoid bypass

    ok great. now i wonder why the factory has a computer controlled version? emissions i assume
  32. Cuzzy69

    L67 boost solinoid bypass

    hi all. keep up the great advice. i now have the l67 installed in my vs with stock loom (Extended) , 10psi pulley and mace chip. full exhaust etc.. i did the boost thing bypass and at idle the bypass valve is open and closes under throttle eg a rev while stationary.. is this right or is it...
  33. Cuzzy69

    diff ratio change. speedo correct! yer i know pls read

    i can only find them for around 200? any place u know cheap
  34. Cuzzy69

    diff ratio change. speedo correct! yer i know pls read

    I have been informed that marks 4wd adapters can supply one with a guarantee to work. price around $250. https://www.marks4wd.com/speedo-correction.html will get one when my l67 is finished. cheers
  35. Cuzzy69

    l67 boost bypass valve damage?

    hi have disconnected the boost bleed solenoid as it will be using ecotech pcm... will this damage the engine ruining full boost all the time? is there a way to install an aftermarket setup if needed..to bleed the boost when not needed.? i just want power and medium reliability.. eg not full...
  36. Cuzzy69

    l67 thermo sits to deep in hole?

    hi all just putting in new thermostat in my l67. when i place it in the housing it seems to be to deep so it wont sit down flush even with the rest top bolted on.. do i need an o ring or someing else? thanks. the3 gasket doesnt make any difference to the fitment.. i have done ecotech and works...
  37. Cuzzy69

    L67 boost solinoid bypass

    awsum great advice.. so if correct i can remove the boost solenoid completely with your instructions?
  38. Cuzzy69

    diff ratio change. speedo correct! yer i know pls read

    spoke to marks 4wd adapters in vic. this model im told will work on 4 speed auto. Part Number: MFKSGI-5E https://www.marks4wd.com/mfksgi-5e.html About $250 bucks. will try soon. as for now moving the needle downwards.. eg pull of needle and preposition it at below zero by about 2cm it reads...
Top