Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. BrutalStormSC

    VY S I, fog lights plugged in but not working? wats next step? help !

    Hmmm, I compared an ss w/fog lights dash fuse box to mine and found that in fuse position 8, the ss has a 7.5amp fuse for fog lights, however, mine has no fuse in that spot and no wired are connected to that spot.
  2. BrutalStormSC

    VY S I, fog lights plugged in but not working? wats next step? help !

    Ok, late thread post, I know. New-ish member. So I have a similar problem as the thread opener - installing fog lights into an ss bumper that didn’t have fog lights. I have the loom (lights already connected), I have a relay in position, and I have an ss headlight/fog light switch, light on the...
  3. BrutalStormSC

    L67 wiring loom

    Yes, they are different. From memory, you will need to lengthen injector wires and water temp sensor. Best way to do it is get a 2nd hand cheap loom and lay it over the motor and adjust as necessary. You will also need an L67 ecu/pcm.
  4. BrutalStormSC

    VY Master Cylinder Bore Size..?

    hi, does anyone have the specs for the differences between the V6, V8, and HSV master cylinder bore sizes? I need to know what master cylinder is suitable for my 6 pot front 4 pot rear brembo big brake kit. Pedal nearly hits the floor... cheers.
  5. BrutalStormSC

    L67 conversion -vx to vy

    This is almost everything you should need to know. Hope it helps. http://mace.kayako.com/Knowledgebase/Article/View/309/0/fitting-vs-vy-l67-into-vy-commodore
  6. BrutalStormSC

    [General] [VY/VZ] Everything to know about Changing Clusters!

    Hi Tazz, I know this is old, just curious if you know anyone in SE qld who can re-program/re-calibrate the clusters, just changed out a standard vy v6 cluster with a green ss cluster. Speedo, temp and fuel work fine after refueling, srs needs to be reset for a ute as it is out of a sedan, and...
  7. BrutalStormSC

    M80 Diff Overhaul?

    That actually makes a lot of sense, I'll get to work on that tomorrow, I'm only new here but I already see why people rate you, cheers mate.
  8. BrutalStormSC

    M80 Diff Overhaul?

    Cheers, by flat bolt, do you mean a bolt with the thread filed down? And the tool you made, a kind of claw socket thing?
  9. BrutalStormSC

    M80 Diff Overhaul?

    hey guys, looking for anyone who's overhauled/dismantled an M80 diff, need to know what tool to use to remove these big screw in flanges that the axels are removed from. Any help is appreciated.
  10. BrutalStormSC

    MACE lightweight M90 rotor pack - experiences?

    So, Mace and Steve, seems these days you're out of stock of the lightened rotors. Is it possible to send mine down to you for machining and have them sent back up after?
  11. BrutalStormSC

    Diffs, FAQ

    Ok, great write up, lots of good info. Still can't find anything relating to later models. Can you please tell me the difference between a VX L67 M80 LSD, and a VY L36 (insert diff model here) LSD? Any help is appreciated. Cheers.
  12. BrutalStormSC

    Strange Noise

    Did you get under it? Give the cat, muffler and resonater a few taps, see if there's any loose particles... if you haven't heard it since, I wouldn't be too concerned.
  13. BrutalStormSC

    VY issue, v6.

    How's your main earth off your battery?
  14. BrutalStormSC

    Got a new VY got a few mysteries

    There's lots of aftermarket tail lights available, and the hose is for exhaust gas recirculation (EGR). Other than that, don't know much about the other body bits. Hope that helps.
  15. BrutalStormSC

    Torqueline truetrac lsd review

    Cheers, will do mate.
  16. BrutalStormSC

    Brembo Big Brake Upgrade

    Thanks mate, still chasing part numbers from Empire Performance... like getting blood from a stone. What kit are you running (362/343)?
  17. BrutalStormSC

    VY Climate Control Conversion

    Good evening everyone! I know there's a thousand threads on this topic, but none possess the information I require. 1: are climate control components from a VX Berlina Compatible with a VY; 2: if yes, how is this done. I have the equipment, the time, the money and the...
  18. BrutalStormSC

    Torqueline truetrac lsd review

    Understood. Would you reccomend Eaton or torqueline? Been looking at pros and cons of both but all I can see is a difference in price.
  19. BrutalStormSC

    Torqueline truetrac lsd review

    So to confirm, more traction, less wheelspin, better for cornering hard.. right?
  20. BrutalStormSC

    Project mode, drowning bank account...

    Project mode, drowning bank account...
  21. BrutalStormSC

    Brembo Big Brake Upgrade

    hey guys, I've been doing some reasearch here and everywhere. I've been trying to source individual part numbers within a kit (emailing the kit providers gave me nothing) from EmpirePerformance...
  22. BrutalStormSC

    Hi mate, was reading a thread on climate control conversion, you mentioned back in 2013 that no...

    Hi mate, was reading a thread on climate control conversion, you mentioned back in 2013 that no BCM change is needed and you have instructions etc. would a VX Berlina CC system match up with a VY standard AC?
Top