Search results

No idea couldnt find, never been over there anyway Nah thats right, but the guy we have to do the roadys just comes out and we throw 50 bux a car or trailer at him and he does the paperwork :P No questions asked Best part is in qld the cops stalk you if you have a lowered vn with a massive 5...

Cheers

Im not from NZ im from Darwin and they are pretty relaxed up there And yes they are more picks here

Hi all, im back with another stupid idea but an ultimate fantasy... dont ask why Want to put a VN/VP V6 in an 84 Mercedes and im after a general list of what ill need to swap over, now obviously ill need to make up a cross member because i plan on using the auto (or manual what ever way i plan...

Well the old bolts keep vibrating loose, i nip them down with a ratchet while the motor is running and they just vibrate loose again Unless there is some superficial force holding them on what stops the bolts from working loose? Or do they come with some good locktite? Has anyone put studs in...

So what stops them winding off?

Yes well its christmas and im casual and work is off for 2 weeks so i have no income for then, and after that i still dont make enough money to afford they luxurys of new oil Now this isnt a registered car so its not like im driving it, but yes water will boil from the oil, dont believe me go...

Loads of people do it But thats not the problem, the lifters presumably are blocked not letting oil get through them to the pushrods Changing the oil wont unblock the lifters (if thats eve the problem)

No still old oil Yes the water will boil/seperate out of the oil

Hi all, back again with another **** box VX sedan V6 Spack (dont know if that has anything to do with anything) But it milk shaked so i did the head gaskets and running the car trying to boil the water out of the oil, but there is only a small amount of oil getting to the rear 2 rockers on the...

And aeroplanes have a set timing of 25*

I think I will Aeroplanes are able to be leaned to 50* lean of peak, and that’s also in cruise to under load of course it wouldn’t be any good If I can achieve something similar with the little cruising I do do I’d be happy I hope to pull it off the road soon anyway and replace it with a...

They don’t (as I understand) because it increases other emissions, so they set it to what they do to get best of everything Cops don’t check emissions though and there is plenty of older cars running a lean mixture so what harm will one more do? I have heard they lean out a bit and even shut...

!!!!!! i dont know tbh

:eek::rolleyes:

I thought the VR had a plug to plug into in the car while the VN has to have some computer intense **** done to change anything... sequential injection isn’t necessary though is it? Just manafactures being fancy? I read somewhere that running a 22:1(I think) ratio will save 33%fuel Why grenade...

_R_J_K_ I want a tuneable Ecm and from what I have heard VR’s have that (yea??) I do believe mine have been chipped “stage 4 auto” is on the side but whether or not that still exists The maf sensor you talk about is that the gauze thing in the induction? I have one off a VT purple R8 (that’s...

Hi all me again wanting to try something stupid again Can I put an ECOTEC ecm in a VN? I know they have different connections but if that all was changed to suit would it work? I’m thinking VX or VR I have one of both Or can the mecmal be swapped into it Don’t ask why, I just want to know if it can

Head or inlet?

I found one loose so maybe thats the issue Can I just tighten and she'll be sweet? Or do I need a new one?

Hi all I have just bought a VX S Pack Holden By Design with presume totaled motor. Thing is infact its fine just water in the oil, it was thought to be a head gasket but how would water get in the oil if it was a head gasket? Is it more likey to be a manifold gasket? And is there a way to check...

I didnt realise it was against the rules, i just did it to say it without saying it... kinda Maybe my car is a death trap already and i dont have the money to get it professionally done And like i sad, the poll was a joke, it meant no harm and was only for some fun Close enough is good enough...

And its $70 here for me @$12 an hour pay, i dont have much money left over for proffesionals

Do we really need non topic related replys? Learn to understand when some one is f&*king around It for a laugh I know how to do toe, and im gonna try to do the other. two.. i was ill equipped to change my springs, but hey i managed And im a tight ass... and have no money

Somehow i managed to post twice

Dead bus, alive bus. just another day here

So to get the most camber, i have the centre towards the firewall/facing out a bit? Least camber would be the opposite? What about the plate between the spring and the bearing plate? How do i have that for the least camber? Trouble is as well i dont have a working jack :rolleyes: I have...

I have a bad camber issue with the front of my vn... When i bought it it had Sl springs and always had negative camber, and i have just put in stock height from a wagon (front) but i still have a camber issue, and i dont have much tyre left on the inside Can i correct this by rotating that plate...

I have a bad camber issue with the front of my vn... When i bought it it had Sl springs and always had negative camber, and i have just put in stock height from a wagon (front) but i still have a camber issue, and i dont have much tyre left on the inside Can i correct this by rotating that plate...

Im tight on money... #first year apprentice living by himself stuff Anyway i now have a camber issue that i must fix first... :rolleyes:

Maybe he doesn’t have one ;)

I want to know how to remap my fuel so it uses less Regardless of what damage it does to my engine

Yea well everyone thinks that everywhere so :shrug:

Km to a liter

No I get 6-7 I’m not blaming a tune, I want to change it I’m looking at new plugs and leads

No idea what the book says It had an msd ignition in it when I got it but that died and I put a vx one in it It also has 10 mm leads... well 5 10mm leads and 1 7mm lead Maybe that’s got something to do with something It also has pacemaker extractors And it had a poddy, which I replaced with a...

I ordered a replacement and they sent a two wire one and I hooked that up and it didn’t work so I told them and they sent a replacement one wire that kinda works Thermostat is on the front

After I bought the sensor I had about $3 left... I have an o2 sensor and I was getting 400-450 km a tank when I bought it but the the sensor died and I have replaced it with a Bosch one, but I get around 300 now I run 94 And that was on 98 Used to get about 10 k per litre, now about 7 in the...

Wait whaaaaaaaat Oh yea Wait... whaaa how does that work? I haven’t seen any way it could I still needed to change the bracket And what year s is an “early”? Cos mine is 1990 What fuel? I run 94 most of the time How many km too a tank did you get?

Yyyyyyyeap